THIS IS THE VERY TOP AD

The Lounge - what was your first post about?




mill$civic
01-28-2006, 12:16 PM
im board so i decided to make this thread, so tell us, do you remember what your first post was???

i think mine was asking about how to take the air bag cover off to paint it without letting the air bag go off


trickyvick
01-28-2006, 12:23 PM
Mine was about me.......someone almost immediately told me to swap the engine out.....lol

In here! (http://www.hondacivicforum.com/m_89508/mpage_1/key_civic/tm.htm#89508)

Here is the comment:

ORIGINAL: remington870_20ga

Welcome to the forum! Id snag a 4.0 from a later model eddie bouwer (sp?) and slap it in.

domestic disturbance
01-28-2006, 01:44 PM
Mine was about joining the forum and why my screen name is Domestic Disturbance. its still in the newbie thread on page two or three.

Quickly followed by... which CAI is best for my ride?


00 Ess Eye
01-28-2006, 01:47 PM
mine was introducing myself and asking about headlights i think

2000 LoW reD Si
01-28-2006, 05:19 PM
Mine was just an intro.. and a little about my car..

My first post (http://www.hondacivicforum.com/m_118578/mpage_1/key_/tm.htm)

riceburner700
01-28-2006, 05:24 PM
i dont remember, probably something about turbos

MccM
01-28-2006, 05:26 PM
ahh my first post. I can remember it as if it was yesterday oh wait... it was today
http://www.hondacivicforum.com/m_158625/mpage_1/key_/tm.htm#158649

mxs
01-28-2006, 05:36 PM
mine was about wheel sizes... ha ha, I was so terrified of buying something that wouldn't fit

Marty
01-28-2006, 08:24 PM
Mine was saying I'm sorry for a certain group of people that did a certain thing to a certain forum, but I was also introducing myself and saying I liked the forum.....

chaseman1978
01-28-2006, 08:36 PM
Think mine was about how to get the trim bezel from around the gauges off so I could replace a bulb or something...

Fiirkan
01-28-2006, 09:05 PM
mine was just an intro about myself, my car, and my dragon.

StifflersMom
01-28-2006, 09:39 PM
Too long ago...LOL...I think it was about how I used to be all about dodge and now I bought a civic...

Mark
01-28-2006, 10:54 PM
i believe it had something to do with some tech help

Cutt
01-28-2006, 11:02 PM
I don't really remember but I am sure it was something about a mini me swap.

BallardCivic
01-28-2006, 11:09 PM
Mine was just a basic intro. What was on my car, and what-not. Nothing fancy.

Nail I3unny
01-29-2006, 12:15 PM
mine was asking about a k20 swap, sacs responding that id better have a big bank account, then i asked about the GSR, he said 'good', ive been wanting a GSR since.

really car ignorant. notice i say 'forced injection' instead of 'forced induction'. mossy pointed that out to me last time we had one of these topics. (http://www.hondacivicforum.com/m_46672/mpage_1/tm.htm)

BallardCivic
01-29-2006, 01:22 PM
I wonder whats Sac's first post was about. I doubt he had any questions since he was born a Honda god...

Nail I3unny
01-29-2006, 02:55 PM
you were asking? (http://www.hondacivicforum.com/m_4361/tm.htm)

jhsplaya08
01-29-2006, 07:35 PM
i really dont know because i didnt even have my car when i joined. i think it was telling about myself a little and the car i wanted...and then about a week later i got..

carlover
01-29-2006, 08:54 PM
sri or cai

gsumano
01-29-2006, 11:22 PM
Apexi N1 or greddy evo catback

Forty04
01-30-2006, 06:31 AM
mine was about the car I was looking to buy. It made a rediculous whistling sound at 4000rpm's and I was panicking cause I really wanted the car, and was afraid there was something very wrong with it.


....this was partially due to the fact that the Jetta I traded in for the Civic, was a problematic piece of ****, which made me very leary about buying another car.

Nail I3unny
01-30-2006, 06:18 PM
ORIGINAL: carlover

sri or cai


i can vouch for that one :p

ef4life
01-30-2006, 07:09 PM
my first post was if anyone knew what you needed to do to put a dc integra console and armrest into my ef civic. no one to this day responded.

p.s. i did the sawp and it looks sweet, but its not done yet i need to fully mount it in so it is sturdy and won't move