THIS IS THE VERY TOP AD

ECU Tuning & Fuel Management - ECU Computer




View Full Version : ECU Computer


Struletz
05-16-2004, 08:36 PM
Does anyone know how to or where to reprogram the computer to change the govnor on it so it doesnt top out at 100, anything but a resistor?


slim11420
05-16-2004, 09:27 PM
what year...and what do you have done to the car</P>

polo708
05-17-2004, 12:57 AM
U need to have a chip "burnt" (from a local tuner shop) or by a programmable ECU. There might be another way to remove the governor only, but I dont know how


Struletz
05-17-2004, 07:13 PM
2003 Civic EX Sedan, i have full cat back exhaust and intake, and header on way.

green98lxsedan
05-17-2004, 08:31 PM
get a superchips or some sort of aftermarket chip. i really dunno how makes chips for hondas. diablo sport maybe??? they can pretty much do what u want them to do. </P>


in my stang im runnin the superchips micro tuner. its pretty cool. you can raise or in my case completely elimininat the top speed limiter. it can also raise shift points in an auto and the shift firmness advance timing and correct the speedo for aftermarket gears. </P>


but i think a chip is the way to go</P>

Struletz
05-17-2004, 09:21 PM
Where would i find a superchip, i think i have heard of one on one of the garage shows on T.V. but i didnt believe it, i thought they said super charger, so where would i be able to buy or find one and how much do they run?

polo708
05-18-2004, 06:25 AM
They can get pretty pricey... I've got my eye on the "unichip", but it runs about $700. You can find a regular chip (even on Ebay) for about $150

Struletz
05-23-2004, 07:30 PM
Does anyone have a website for the superchip or any type of information i could get on ordering one, because i have heard they can do some wonders for a car? Thanks
-Struletz

green98lxsedan
05-23-2004, 09:31 PM
check with your local speed shop. they can custom burn a chip for your car. they will put it on a dyno and fine tune everything. you can get some sweet hp out of a superchips chip. there are a ton of chip makers.

polo708
05-24-2004, 01:08 PM
type in www.yahoo.com [sm=smiley2.gif]

lilol89crx
05-24-2004, 10:02 PM
best way to do it would be taking it to a shop with a dyno and have them custom burn it. is hondata avalable for the 01+ ?

Drift queen
07-13-2004, 01:40 AM
If you are going to go to all of the trouble of fiddling around with the ECU, replace it with a Motec, particularly the model with launch control. They are King S*#t of computers. Microtechs are okay, but they are like the mcdonalds version if you get my drift....;)