EK Swaps - B18c Swap

Question swaping b18c into a 96 civic coupe 2dr, is this a direct bolt on ive read back and forth as to how the swap is between direct bolt in too harness mods and rear mounted parts??? Honda swap guide said direct bolt but i figure id ask here get it from someone who has done it.

i did it into my 95, which has almost the same bay as the 96. its not too hard at all. it requires mounts from a 99-00 si or integra (the front mount which also holds the AC pump should come from the si or a dual cam del sol.) and other than that, the wiring is kind of a pain, but other than that, its about as easy as a stock to stock engine change. good luck, and its well worth it.

any advice you can give me as to wiring ,lol sorry if its asking allot just curious as what i have to look forward next month when it gets here

by the way before i forget, before i order this i wanted to ask if ya know any solid places to get the swap from

where ou located? kappa has a few places he suggests all the time, im sure he'll chime in. if youre in Nor-Cal, i could help you out, but otherwise, shipping is too much to do either of us any good.

ya im upstate ny lmao, so a bit diff, hmmm but eh if your willing to help me in anyway be it info or what not or a point in the right direction thanks. but ya wish i was in north cali

kappa has a few places he suggests all the time, im sure he'll chime in.

Yeah, it's true. These are the places I give to everybody.

Sunrise JDM (They're in Quebec, so they might be close to you) http://www.sunrisejdmmotors.com/honda.php

Nippon Motors (SoCal, maybe not your best option). http://www.nippon-motors.com/honda.htm

alright thanks for the sites. and how about an insight to adding a vtech pin on the harness and such. what you guys think the best way to do that is

http://www.passwordjdm.com/product.asp?numRecordPosition=17&P_ID=531&strPageHistory=&strKeywords=&SearchFor=&PT_ID=134 tell me what you think about this looked pretty solid but figured best bet is to ask on here

go cut the harness out of a 6th gen civic at the pick-n-pull do it yourself junkyard in your area, then remove the pins and splice them in.

anyplace you reccomend for a good wiring diagram?

ORIGINAL: DenkiEx

http://www.passwordjdm.com/product.asp?numRecordPosition=17&P_ID=531&strPageH istory=&strKeywords=&SearchFor=&PT_ID=134 tell me what you think about this looked pretty solid but figured best bet is to ask on here


holy crap, hmm... i would not go with that. PasswordJDM in my experience is way overpriced. If you were gonna spend that much, you might as well have bought this, which is what Im getting in the fall https://www.tigerjapanese.com/product_info.php?cPath=42&products_id=135.

as for the wiring diagrams, I cant really halp you there. Maybe your local honda/acura dealership might have something like that, but i doubt it. Or you can label all the plugs you remove so you know where they go again. That will help significantly when dealing with the other harness on the new engine.