ECU Tuning & Fuel Management - D16Y7 turbo ecu

If i would turbo my D16Y7 what ecu would you suggest? Its OBD2 so from what i hear its untunable and i dont want to spends thousands on systems like the AEM EMS, etc. What are some options?

odb1 conversion, then use something like hondata, crome, neptune, etc.

p06 OBD1 ECU i believe. I think the P28 is a VTEC ECU.

^ edited to correct, thanks Tyler

p06 non vtec, p28 vtec. gotta get a obd conversion harness and someone to chip your ecu for you.

www.phearable.net (http://www.phearable.net)

^ can get an OBD1 ECU, conversion harness, and a basemap all from one place (i've heard of cheaper places to get ECU's, i've never actaully seen one).

ORIGINAL: aryiman98civic

p06 non vtec, p28 vtec. gotta get a obd conversion harness and someone to chip your ecu for you.


Just to be a little more specific, you'll need an OBD2A-OBD1 conversion harness.

mxs suggested a P72 ecu...because you can retain your knock sensor....

Would this be what i need?

Chipped/Socketed NON-VTEC Phearable.net Ecu.+ Obd2 to obd1 conversion harnes for $230

^ sounds good to me