danomatic93
01-19-2008, 05:05 PM
Because of differences in opinion and practices I feel that I must distance myself from this forum until action is taken or things change. I will be back from time to time and if you feel that I can help you with anything feel free to PM me! You'll still be able to catch me rocking out at Neons.org and CamryForums.com. I want to say thank you to everyone that has helped me learn more about my car. Most of you have been more than welcoming and have been very helpful and supportive. Keep that up!
Before I leave, I want to update yall. Just recently, I was stopped by a guy that wanted lambo doors on his Civic. Well, one thing led to another and I sold him mine and got paid to put them on his car. I got some EK skirts and JDM thin molding paint matched and I installed them when I remove the lambo kit. I’ll try to get pictures but it’s -5 degrees outside and my camera can’t handle that apparently.
I have a lot of plans for this summer as far as the Civic goes. Here’s my checklist:
-Remove white face gauges
-Install pillar gauges (volt, oil pressure, a/f) (YES, I know it is crap with a narrow band O2 sensor, shoot me)
-Replace old coilovers w/ Skunk2 coilovers
-Put on Skunk2 LCA’s
-Put on Beaks subframe reinforcement kit w/ ITR sway bar
-Put on Skunk2 front camber kit
-Put on Rear camber kit
-Buy and mount some new tires
Before I leave, I want to update yall. Just recently, I was stopped by a guy that wanted lambo doors on his Civic. Well, one thing led to another and I sold him mine and got paid to put them on his car. I got some EK skirts and JDM thin molding paint matched and I installed them when I remove the lambo kit. I’ll try to get pictures but it’s -5 degrees outside and my camera can’t handle that apparently.
I have a lot of plans for this summer as far as the Civic goes. Here’s my checklist:
-Remove white face gauges
-Install pillar gauges (volt, oil pressure, a/f) (YES, I know it is crap with a narrow band O2 sensor, shoot me)
-Replace old coilovers w/ Skunk2 coilovers
-Put on Skunk2 LCA’s
-Put on Beaks subframe reinforcement kit w/ ITR sway bar
-Put on Skunk2 front camber kit
-Put on Rear camber kit
-Buy and mount some new tires