HCF Project Section - hamorhead's almost turbo'd rex

Last May i found a 1991 crx si on craigslist and decided to buy it and sell my 93 hatch. I was told it needed a new clutch and a/c compressor. Since i bought it i have replaced the clutch, front and rear brake pads, front and rear brake rotors, rear brake calipers, master cylinder, ignition switch, and struts.

The rex will eventually be turbo'd on stock internals pushing 200whp converted to OBD1. It will be tuned by John Vega from phearable.net.

Current modifications (installed)
exterior-
Amber corners (old one was cracked)
02 civic factory option wheels
sunroof delete
rear wiper delete
)
antennae delete

interior-
monstershift knob (thanks trustdestruction)
pioneer HU
infiniti kappa speakers
150 RMS no name amp for speakers
2 10" rockford subs
500w RMS rockford amp for subs

suspension-
kyb agx struts
eibach sportline springs
rear strut bar

drivetrain-
exedy stage 1 clutch kit
short shifter (thanks trustdestruction)
short ram intake with K&N filter
cumtom magnaflow catback
SS brake lines

Future modifications- (owned but not installed)
Mitsubishi TD04H turbo
Greddy log manifold
HKS BOV
DSM black top injectors
oil lines
Equiss oil and boost gauges
PLX M300 wideband
Greddy downpipe
intercooler and charge piping

http://i268.photobucket.com/albums/jj17/hamorhead/struts011.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/DSC_0002-1-1.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/car001.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/car005.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/struts002.jpg

Well the first night i bought it, it rained and i awoke to find a large puddle behind the drivers seat. I ripped the interior apart to let it dry and also found my problem which was clogged sunroof drain tubes.

http://i268.photobucket.com/albums/jj17/hamorhead/DSC_0021.jpg

So after completely stripping and putting back in my interior i decided that i would never let this happen again. Istarted looking for a new sunroof, a used non-rusty one, or a sunroof plug. A new sunroof was $400 so that option was out, no one had a used crx sunroof so that option was out, and sunroof plugs were almost as expensive as a new sunroof. So what do i do? Ghetto-ify. My dad and I took fiberglass and made a template using the old rusty sunroof and used brackets and silicon to secure it in. This approach was functional but very ugly. We decided to bondo it flush and paint the entire roof. Its pretty now:), but still needs real paint instead of spray paint.

here's the car as she sits-

http://i268.photobucket.com/albums/jj17/hamorhead/car002.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/car003.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/car004.jpg

i will post more pics when the roof's painted and she's actually clean

Nice to see a CRX on here getting some love. Ive always wanted one.

yea i love my crx

heres some pics of the DIY lip

http://i268.photobucket.com/albums/jj17/hamorhead/lip001.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/lip002.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/lip003.jpg

What on earth did you make the lip out of? Actually looks pretty damn good from the pictures.

3" vinyl siding from lowes
theres actually a discussion on HD lips here-http://hondacivicforum.com/forum/showthread.php?t=77704

and thanks its actually an air dam to get more mpgs :) and it looks good

my dad got some white paint from a friend for free so it looks like the roof will be painted soon :)

Also my brakes are feeling spongy and ive bled them like 5 times im thinking about getting SS brake lines anyone have opinions on these or good brands to buy?

well even though no one really seems to be following this i'm gonna keep at this for my purposes to look back on when im done

i got some goodies today
http://i268.photobucket.com/albums/jj17/hamorhead/projectthread002.jpg

as well as putting on a new pretty radiator cap (thanks trustdestruction) and new door prop(thanks trustdestruction)
http://i268.photobucket.com/albums/jj17/hamorhead/projectthread001.jpg

also i will be buying my FMIC and piping soon:)

and if you guys couldn't tell i like pics and taking them :)

looking good bro, cant wait to see the pics from the install

what kidn of power u want?

Had to subscribe. Good project.

The rex will eventually be turbo'd on stock internals pushing 200whp converted to OBD1.


some how the quote doesn't qualify for the 5 letter rule
thats wierd

but thats what ill be running

ive decided i want the rex to be tuned by John Vega from phearable.net ive heard he does really good tunes plus hes only an hour further than the closest (reliable) tuner

also im looking at getting one of the following FMIC kits any suggestions?
also i'm gonna paint it black so i'm leaning towards the one that is already black
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190329166973&viewitem=&sspagename=STRK%3AMEWAX%3AIT
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250483258229&viewitem=&sspagename=STRK%3AMEWAX%3AIT
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220466349935&viewitem=&sspagename=STRK%3AMEWAX%3AIT

and yes i know ill have to modify it to fit;)

They are all about the same. You could easily paint it yourself so its pretty much up to you. I prefer the chrome look for the intercooler and piping

alright i was wondering it looked like some might have different bends
and im going for sleeper status so i wanted black tubing
i'm even gonna rock hx's so it looks like i have stock wheels
oh yea and gonna resonate my exhaust quieter;)

http://stores.shop.ebay.com/Just-Intercoolers_Intercooler-Kits_W0QQ_fsubZ3QQ_sidZ137155886QQ_trksidZp4634Q2e c0Q2em322
Sorry reading > me on power levels. but go there. ive heard great things about their kits, and i love mine from them as well. Whichever route u go, I highly suggest bead rolled tubing, itll help keep the couplers on.

its all good

and im thinking of this one from the company you recomended-http://cgi.ebay.com/ebaymotors/CXRacing-Intercooler-2-5-Piping-Kit-DEL-SOL-Crx-Jdm_W0QQcmdZViewItemQQ_trksidZp4634Q2ec0Q2em14Q2el 1262QQhashZitem5ad24d5fa7QQitemZ390075342759QQptZM otorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

and i just bought a used plx m300 wideband:)

and i just bought a used plx m300 wideband:)

ugh i hate you, thats the one i want

it was $155
do you hate me more now lol

so my gfs gonna be goin to school in florida....if it goes missin in the next month or two...dont be surprised

lol
wheres she going?
ill make sure to avoid that part of the state

and the car probably wont be boosted for a few months so youre gonna have to wait for her to steal it

o no, ima steal it....and ill sneak into your house too :)

no in all seriousness...seems like its gonna be a fairly reliable setup for you

i hope its gonna be reliable
this is my first time playing with boost and i'm trying to do it the right way

so i had to take off my lip today so i took pics do you guys think i should leave it off or put it back on?
and i took some random pics

http://i268.photobucket.com/albums/jj17/hamorhead/lip001-1.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/lip003-1.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/lip004.jpg
sweet custom exhaust tip
http://i268.photobucket.com/albums/jj17/hamorhead/lip009.jpg
yes my car is called the panda and it has a panda
http://i268.photobucket.com/albums/jj17/hamorhead/lip006.jpg

i like where this thread is going, keep up the good work. I've got the same wideband and love it, super easy to get set up. And i'd put the DIY lip back on

thanks
and im split between the lip
it scrapes quite often but gives me better mpg also it looks better than stock but im trying to go sleeper status
so im torn...

does anyone know if its better to replace my head gasket when i put in ARP headstuds?

Yes, I would go ahead and get a thicker HG since you will be turboing.

Yes, I would go ahead and get a thicker HG since you will be turboing.

just to lower compression or is it just to have a thicker hg? cuz the D16A6 already has a lower comp ratio than the other D16s i believe its 9:1
and what brand? ive heard mixed things on cometic

Mainly to lower compression just a little. I have a cometic HG, no complaints. If you don't go cometic, I would just stick with a new OEM one.

I like it without the lip. But its going to be hard to mount an intercooler and keep it hidden on a crx.

i think im going to leave the lip off because i like not scraping or worrying about scraping everywhere

and since my comp ratio is low enough for me i would just replace this with a new OEM one

will it be better to replace with OEM or just leave the one i have on there now?

Might as well replace if your uncertain about its condition.

yea it came on the car
i guess i add that to the long list of maintenence items lol

got the wideband in

http://i268.photobucket.com/albums/jj17/hamorhead/wideband001.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/wideband002.jpg
and its not really as scratched up as the pics make it look (stupid flash)

and i bought a new master cylinder cuz my brake pedal was sinking so i decided i might as well replace the brake lines too
so i bought some SS ones:)

my ignition switch went out today:( and it almost left me stranded but i finessed it oh so fine and made it home i replaced it and its all good now:)

oh and while it was apart i just HAD to start the car with a screwdriver ;)
yea i know im a car nerd but it was SOO cool

got in the SS brake lines
gonna put those on and my new master cylinder this weekend hopefully

http://i268.photobucket.com/albums/jj17/hamorhead/ssbrakelines001.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/ssbrakelines002.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/ssbrakelines003.jpg

so i installed my SS lines and my new master cylinder but havent driven it yet

also i got an avatar

im in love with the rims

better

thanks but next time please dont quote the whole first post its just gigantic
oh and if your near me ill sell them to you whenever i get some hx wheels

and my dad came home and we bled the brakes and WOW it brakes so much better now
a nice firm pedal and also the pedal doesn't sink to the floor anymore
best $160 ive spent on the car

Nice. and just use a stock headgasket when you do the head studs. For a stock motor, an OEM is fine.

ok cool
thanks

picked up a headgasket today as well as-
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille001.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille002.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille003.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille004.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille005.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille006.jpg
someone make the picture below my sig pleeeeeeeeeeease
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille007.jpg
and this grille was free
http://i268.photobucket.com/albums/jj17/hamorhead/newwheelsandgrille008.jpg

wheel well gap is almost nonexistant it looks really good
and there about 10 pounds lighter each :D

Looks good man. I definitely like them.....however, I think they would look better bronze! I also beat Nike regarding the sig haha. Use it or not, it was just for fun cause I was bored on photobucket.

http://i279.photobucket.com/albums/kk152/cvcrcr99/Sigs/hamorssig.jpg

Edit - if you want to use the sig, but without the bronze wheel, let me know, I'll remove it and re-post it for you to save.

yea ill use the sig but without it bronze
thanks man
and can you leave the bronze one up there it does look really good

and could you possibly put the link to my build thread in it
pleeeeeaaaasssseee:D

I have no idea how to do that stuff (the link), I am not even sure if you are able to do so with the free version of photobucket. I also realized I saved that copy over the original, so I'll try to get that one without the bronze up again.

and im going to sell the old wheels and tires
how much do you think i can get for them
i'm going to strip the paint and sand them down and repaint them aluminum colored and try to make them as perfect as i can (with my attention span)
the tires are Kuhmo ecstas and have 50% tread left

I have no idea how to do that stuff (the link), I am not even sure if you are able to do so with the free version of photobucket. I also realized I saved that copy over the original, so I'll try to get that one without the bronze up again.

thats fine
i have no clue for anything except uploading the pics and copying them here
so its all good

Well, I looked around real quick, but couldn't find anything that would incorporate a link. If anyone knows how to do this with the free photobucket, let me know. But, here's the one without the bronze....maybe Nike could change it up a bit if you want and also throw that link in there.

http://i279.photobucket.com/albums/kk152/cvcrcr99/Sigs/hamorssig-1.jpg

it said the file's too big wtf?
your sig pic is bigger
the sig looks good though
thanks man

I took that photobucket link and pasted into directly into my sig....worked just fine. sweeeeeettt I got a rex now:)

Use what I have below without the brackets, and put in the "I" in the beginning. You probably can do it with the quote, and the "91 crx si waiting for boost" because you are allowed four lines only. However, I am just guessing about you being over the 4 line limit.

{[MG]http://i279.photobucket.com/albums/kk152/cvcrcr99/Sigs/hamorssig-1.jpg[/IMG]}

no i guess i was just retarted because b4 i treid it without the quote and it didn't work now it does
thanks

What are those wheels off of again? and how much did you pay? They look amazing IMO.

LOVING the rex man good job

http://web.mit.edu/ryangray/Public/Gnus/thumbs_up.jpg

No problem. All you have to do is play around with the edit features on photobucket. They have some pretty cool things in there.

Hopefully, someone can jump in here and hook you up with a project page link in your sig. BTW, I am kinda jealous of those wheels. I really do like them a lot. Even more so as they are somewhat rare. I don't see them too often.

[ URL="http://www.hondacivicforum.com/forum/showthread.php?t=77681"][ IMG]http://i279.photobucket.com/albums/kk152/cvcrcr99/Sigs/hamorssig-1.jpg[/IMG][/url]

http://i279.photobucket.com/albums/kk152/cvcrcr99/Sigs/hamorssig-1.jpg (http://www.hondacivicforum.com/forum/showthread.php?t=77681)

There ya go hamorhead.... just remove those 2 spaces i added...

thanks guys
and theyre off an 02 civic but theyre optional so not that many pple opted to pay the extra for them i guess
i really like them and they look practically new
and they were $250 all tires 80% tread
but the tires dont match:(

[ URL="http://www.hondacivicforum.com/forum/showthread.php?t=77681"][ IMG]http://i351.photobucket.com/albums/q461/nikeh34d/newwheelsandgrille007-1.jpg[/IMG]
[ IMG]http://i351.photobucket.com/albums/q461/nikeh34d/newwheelsandgrille0071.jpg[/IMG][/url]

http://i351.photobucket.com/albums/q461/nikeh34d/newwheelsandgrille007-1.jpg
http://i351.photobucket.com/albums/q461/nikeh34d/newwheelsandgrille0071.jpg (http://www.hondacivicforum.com/forum/showthread.php?t=77681)

ooh nike thats good sroory cvcrcr99 but im gonna have to use nikes
and nike i like how you have your sig in my sig lol

Nice and clean. What suspension you running again? I'm liking those wheels, I've only seen them a few times before. Rare OEM things are sweet.

ooh nike thats good sroory cvcrcr99 but im gonna have to use nikes
and nike i like how you have your sig in my sig lol

Yeah imma start doing that [Leaving my name on my sigs] it helps my ego :P

Nice and clean. What suspension you running again? I'm liking those wheels, I've only seen them a few times before. Rare OEM things are sweet.

i have kyb agx"s with eibach sportlines and they fit my driving style very nicely cuz i can make them soft if im taking a girl out or i can make them stiff when i wanna have fun:D
and thanks on the wheels i like them more everytime i look at them:D

and idk if you guys can tell in the pics or not but they are factory polished and look super sexy in the sun:D

Yeah imma start doing that [Leaving my name on my sigs] it helps my ego :P

its all good you did the work and they look good you deserve to have your name on them

Nice. I actually have a set of Sportlines on the way. I bought the Tokico "Advanced Handling" package, but it didn't lower it very much in the front. So I bought the Eibachs off Ebay for about half price, brand new in the box. I'm hoping they will drop the front to the point I like, but the rear is just perfect. So I'll be running Eibachs in the front and Tokicos in the rear.

i like the sportlines but idk about the tokicos in the rear and sportlines in the front did you check the spring rates? i would think the sportlines would be stiffer which would make you understeer even more or are you just going for looks?

also i just bought some OEM lug nuts for the wheels (thanks trustdestruction) and a low tone horn (thanks Danomatic93)

Right now I'm just going for looks. However if the drop is good in the front, I might change the rears too. I'm just praying I won't need a camber kit.

im not using one and its fine
and reaper will also tell you its not about camber its about toe
toe eats tires
also for the rear you can do the washer trick (just google it)

The washer trick does work for the rear. Thats what we did. I just got an alignment so I should be good for a while until the springs come and get put on.

yo man, im neck deep in foreign territory on my civic. good to see a guy with a shop can do it himself. im subscribing for inspiration. i have lots o progress pics too, im just not skilled enough to organize it all for everyone to look at and enjoy. keep it up bro!

Thanks
But I don't even have a shop I do everything myself in my parents garage

Great job! Where did you get the stainless brake lines? How do like them now that you have had them on the car a while?

i got them off amazon and i never drove the car with a good master cylinder b4 i put them on but the brakes feel better than on my old civic that was stock i wouldd recomend them if your car is older than 2000 because your rubber lines have probably started to deteriorate

so i got my bad wheel bearing replaced yesterday and OMG it drives so much better and is quiet now totally worth the $$$

I had a bad wheel bearing when I bought my car and the thing rode like crap. It was so bad that I had to torch off the old bearing that was like seized to hub assembly or whatever lol.

mine wasn't that bad

anyone who looks at this thread should respond to my others lol-
custom shift knob- http://hondacivicforum.com/forum/showthread.php?t=78368
tint my turn signals- http://hondacivicforum.com/forum/showthread.php?p=670883#post670883

so i decided to change my color scheme i was thinking-
http://i268.photobucket.com/albums/jj17/hamorhead/ballin3-1.jpg
opinions?
http://i268.photobucket.com/albums/jj17/hamorhead/ballin3-1.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ballin3-1.jpg

biggest update of the thread coming tonight
omg! i cant wait
hint:im going to have to redesign the front page and im gonna have to start a forsale thread

OMG OMG OMG
Pics-
http://i268.photobucket.com/albums/jj17/hamorhead/005.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/006.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/007.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/008.jpg
do you know anyone else this balling?
http://i268.photobucket.com/albums/jj17/hamorhead/013.jpg
yea i have an intercooler hanging from my tv:D

size comparison T3/T4 vs whatever the new one is i forgot lol
http://i268.photobucket.com/albums/jj17/hamorhead/012.jpg

no shaft play in turbo the intercooler is a lil beat up and the bov is a lil scratched but i gots almost all my parts now:D and the guy gave me some extra stuff i can sell

i cant see my pics can anyone else?

there they are!

and b4 you ask i changed the front page to reflect the new parts
ill still answer if you ask but if im in a bad mood im gonna provide you a link to the first page lol

Just curious, how much it to have your wheel bearing fixed?

i priced it out as $160 to do it myself or $220 to have the shop i go to fix it
i shelled out the $60 extra lol

so when i went to pick up that turbo kit i overheated the cheap dual amp that i had powering my speakers and i cant find one on cl so i took out my subs my other amp and the cargo cover and the car lost like 50 pounds there

also i realized if you take out the cargo cover and flip the divider thing down the back of a rex is gigantic like i could almost completely fit my surfboard (6') in there
if i ever do a engine swap it would totally fit back there

Damn, thats pricey. My friends Ford was only $89 so I was hoping it would be similar for mine. And yeah, Rex's are pretty spacious in the back. I could fit all of my guitar equipment for shows in the back easy, 4x12 speaker cab, head, 2 guitars and cases, and pedals.

well the part was like $80 but it has to be pressed in and the cheapest i could find around here for that was $70 if you have access to a machine shop you could press it in yourself then it would only be around $80

and my greddy catback was all rusted out so i had my exhaust shop make me a custom catback with 2 1/4 piping
its a resonator and magnaflow muffler
it sounds so nice at a constant rpm you can barely hear it but when accelerating over 3k rpms it gets nice and deep no rasp at all

and best of all it looks stock and sounds stock at idle and constant rpms:)
just adds to the sleepiness
oh yea you can come and steal my car since i posted the license plate #
you know because there so many other white crxs in my area you might get them confused lol

http://i268.photobucket.com/albums/jj17/hamorhead/exhaust001.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/exhaust002.jpg

http://i268.photobucket.com/albums/jj17/hamorhead/exhaust003.jpg

still debating whether to paint it black like the old one or leave it as is
any suggestions?

I say paint it black. Looks wierd hanging down there like that.

Ive always like them painted flat black

It doesn't hang down as bad as it looks
The pics were taken downhill from the car
Also I have to wait for the oil to burn off before I can paint it so I'll make up my mind by that time

that exhaust is going to be a hindrance with boost

why?
stupid 5 letter rule

cause its 2 1/4 inch

but the downpipe on the greddy kit is only 2 inches

http://i268.photobucket.com/albums/jj17/hamorhead/exhaust002e.jpg
heres the worst chop ever

LMFAO ill do the chop real quick HAHA

thats all i could do
than i figured it write ish to make it funny

http://i351.photobucket.com/albums/q461/nikeh34d/hamorhead.jpg

http://i351.photobucket.com/albums/q461/nikeh34d/hamorhead1.jpg

thanks
looks good
i like it with the blacked out taillights its like all black and white besides the red si and the struts

but im still trying to go sleeper so im not gonna tint them

thanks
looks good
i like it with the blacked out taillights its like all black and white besides the red si and the struts

but im still trying to go sleeper so im not gonna tint them


all I did was remove the bluish tint that is all over the place lol makes the black blacker... instead of blue

i guess its just a glare or something

so i decided to tint my turn signals and install some fogs today
these were a test i know theyre not perfect but i adjusted them after the pics
pics
http://i268.photobucket.com/albums/jj17/hamorhead/frontend001.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/frontend004.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/frontend005.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/frontend007.jpg

Looks good! However, I feel the need to say this.....




.................................................. .................................................. .........your wire is showing. j/k-ing with ya :)

yea i knew someone would say that but did you notice the blue one too? no look harder
but thanks i really like it and the foga are actually yellow so while driving it its like those cars w/ the yellow fogs and HID's (even though i dont have them i have the silverstars)

subscribed

im gonna hit boost b4 you :P

i bought a new amp the other day
a vibe 400 watt for my speaker
and im buying a new clarion HU thats sweet cuz i f'd up my pioneer

What is your sound system budget?

not much ive already dipped way too much into boost money to but stuff
why?
im planing on spending around $140 on the HU

If it were me I'd sell all the speaker stuff and buy gofastar/handle parts.
http://2.bp.blogspot.com/_Sobz20PbHJI/SSpNEtnTLeI/AAAAAAAAAK4/tEWDh802N_c/s320/O_RLY.jpg

Are you trying to get into the 4sale thread? A Lot of sudden posts from you.

And read the rest of his thread. He isn't ALL about audio, just wants a little nice sound in his car.

thank you nike and if you read this you should totally chop a VW lip on my car
k
thanks

thank you nike and if you read this you should totally chop a VW lip on my car
k
thanks


Holy snap... PLEASE GET ONE!!!! lol

I am trying to get into the sale section, I'm not going to lie. However, I am making constructive posts into getting there - am I not?

I went through a phase where I was considering upgrading speakers / putting in a subwoofer, etcetera. At the end of the day - to me it's added weight and not performance driven. Again that's just my opinion.

If Hamorhead is happy with more powerful speakers and some subwoofers then by all means spend the cash on it! :)

Once again did you read his thread? lol He isnt trying to shatter his windows or anything...

and to Hamorhead...

http://cgi.ebay.com/ebaymotors/VW-Golf-MK3-Jetta-VR6-GTI-Deep-Front-Bumper-Spoiler-Lip_W0QQcmdZViewItemQQ_trkparmsZ65Q3a15Q7c66Q3a2Q7 c39Q3a1Q7c293Q3a2Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2 em14QQhashZitem20abb08db0QQitemZ140319428016QQptZM otorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Click Buy It Now Kthx

And the chop is too hard lol im sure you can find a CRX on google with the lip

im fully done with a set of infiniti kappas powered by a 400w vibe amp
and 2 rockford 10's powered by a 500w rockford amp
and my awesome new clarion HU i just bought
sounds so good

ive replaced my old system as i went but they were all new

My CRX > Reapers CRX

http://i351.photobucket.com/albums/q461/nikeh34d/Rexsex.png

http://n2.nabble.com/file/n3153044/buttsecks-1.gif

that would be tight to have those actually airbrushed on

purp purp
new siggy soon

battery relocation+ ac removal=
(also random pix)
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt009.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt010.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt008.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt011.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt012.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt013.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt003.jpg
http://i268.photobucket.com/albums/jj17/hamorhead/ebayandpt004.jpg

soo as cvcrcr99 has assumed the project is dead
im over the 2 seaterness so im gonna sell

Sooooo ... are you simply moving the boost project to a different car, or are you finished with that, too?

I didn't mean anything by saying that you needed to update your project thread, I just didn't know what else to say in the lounge thread lol

lol its cool and if it comes with a single cam in good condition yea itll be boosted
but if not H22 swap FTMFW!!!!!

and i want a 4dr EF or EG

Well, since you aren't sure if you boosting yet, would you sell the boost gauge you have? j/w

lol i already sold 2
but im gonna keep the one i have since its sorta beat up its not worth much its an autometer with most of the paint scratched off lol but works fine
btw ask jprommel i sold him one but hes talking like hes not gonna keep the civic
cvcrcr u should get an aim accnt

I'll be on the look out for a FS thread from jprommel. I just need something simply to be able to monitor my boost. I was going through my datalogs recently and notice that I actually hit 8psi when I thought I wasn't going to go above 7. A boost gauge will help me determine if the SC has any belt slippage at anytime.

I have one (AIM acct), I am just never on there.

It is my93civicex . I had made it back when I was in like 10th grade when I first started driving and when I was in love with my slushbox-ridden EG coupe. Ever since high school ended, I never go on there anymore since everyone I knew stopped using it as well. I'll hop on now if you guys want to add me or start up a chat or whatever.

come on aim dude me 94chb, jprommel, supersize, trust, and other are on all the time

also if my dads ok with it im gonna keep the rex and pay for insurance on it even though itll b sitting for awhile waiting on a b20vtec or H22 while i dd the new car on boost :D

sounds like an awesome plan too me :D

mmmm b20Vtec... I want that so bad haha

http://hondacivicforum.com/forum/showthread.php?goto=newpost&t=79156

ok so ive decided
swap the hatch
turbo the rex
so this project thread goes on as normal
and hatch gets his own soon

so im picking up a z6 with a built bottom end 2 z6 trannies hx wheels and a turbo kit for the z6 from a local guy tonigh

hatch will get the d16a6

and i just got a tapped oil pan that idk what to do with lol

so nvmnd with that^
i realized im not rich so im gonna get the hatch finished then sell the rex
i just dont have enough money to make both cars to where i would be happy to drive them
(within a reasonable amount of time)