HCF Project Section - 94CHB INTEGRA's FIXN' UP

well since i got a car that needs alot of work. I've decided to make a thread for it to show my progress.


first off here's the car.
93 integra with a jdm b16a
and 2004 ep3 si wheels.

http://i889.photobucket.com/albums/ac91/unholy_mitch/0702091614-1.jpg


http://i889.photobucket.com/albums/ac91/unholy_mitch/0913091853a.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/0913091853.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/0913091853b.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/0913091854.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/0618091911.jpg

now heres my first main problem. the rear suspension is messed up

http://i889.photobucket.com/albums/ac91/unholy_mitch/0914091539.jpg


and also today i noticed the transmission only had 1 bolt left in it holding it up and was just about to fall out.
so i got it fixed.
my o2 was bad and had a cel so i got a new o2 today.

i also got my new cat since this thing didnt have anything and was insanely loud. bought a new cat fro 20$ and got it intalled for 30$. now it sounds so much better. ill take more pics tmw and so on.

nothing to do with your car but i love your new sig lmao

Looks like a nice set-up. Anything major planned for it, or will you be just fixing little things and that's it?

how in gods name did the rear suspension get like that?

the nut on the top of the strut comes off then they drive over lots of speedbumps and potholes and crappy roads and bend the crap out of it
and this whole time they never notice how? idk
my car did the same thing once but it was loud as hell and as soon as it happened i stopped driving then fixed it

Good luck with her.

Looks like a nice set-up. Anything major planned for it, or will you be just fixing little things and that's it?

first im gonna fix the things that need fixin then im gonna work on possible a turbo and lip and headlight conversion and maybe a few other things.


today- i put more motor and trans mount bolts in it.. now the engine dont jump around.

today- i put more motor and trans mount bolts in it.. now the engine dont jump around.

amazing how that works

was this teg like completely half-@$$ed?

amazing how that works

was this teg like completely half-@$$ed?


so far yes it appears to be. the trans only had 1 boly left in it and was just about all the way out, the front motor mount didnt have any bolts, the side main motor mount only had 1 bolt in it. and i had a bad fuel leak where they put a new fuel filter but didnt put the copper washers inbetween the bolts. but i got all that fixed to day.

tmw im gonna wire up my stereo.

you gonna be bumpin?
what you putting in?

i have a sony 800watt 2ch amp that i customized and put a computer fan on top to allow good air flow so amp wont get hot.
and a Rockford fosgate 12" p3.

sweet
yea the whole air flow thing is good
i blew up my old one for my speakers so now i have ipod until i can find a new cheap amp

i have a sony 800watt 2ch amp that i ghetto rigged and put a computer fan on top to allow good air flow so it will compress air.
and a Rockford fosgate 12" p3.

fixed :D

http://i889.photobucket.com/albums/ac91/unholy_mitch/0917092145.jpg

http://i889.photobucket.com/albums/ac91/unholy_mitch/0917092145a.jpg

http://i351.photobucket.com/albums/q461/nikeh34d/peewee.jpg

lol at the tiny air compressor

PHUCKKKKKKKKKKK those shocks lol had to cut the bolt but they are officially out! lol

good job your noticing these things, and fixing it before something major happens haha

PHUCKKKKKKKKKKK those shocks lol had to cut the bolt but they are officially out! lol


lol u win!! i really appreciate it jason thx.. pm me ur paypal email address.

you would believe the ish ive done today... first i added more missing motor bolts,
then went and bought alot of srews and screwed all the interior panels in they where just sitting in there. i bought seat belts for my car and missing panels for 70$ shipped, i bolted down the passenger and driver seats, wired my stereo in and subwoofer, replace all the missing and rigged fuses. bolted down the back seats. oh and i bought new wheel studs and lug nuts that were missing, the front wheels only had 2 lug bolts/nuts holding the wheels on. i cut all the rigged wiring out and fixed almost eveything back to stock.
and im out still working on it. il post pics in a little while.

Dam sounds beast dude god dam haha that car was bout as rigged as it gets DAM and pm sent

Did someone piece that car together? Damn.

i guess they had the interior stripped and when i bought it they just threw everything back in.

ok well yesterday- i got my new o2 sensor installed to get the cel off and it didnt go off it was still throwing o2 senor code. so i pulled the carpet up to check the o2 signal wire and the ecu wires had been hacked up a little and a few wires werent hooked up. so after much online researching i was able to rewire the ecu THE RIGHT WAY. and now i no longer have a cel. i got all the wires fixed but 1 i wasnt able to find where it goes into the ecu its a baby blue wire with grey spots. i also noticed they didnt install a vtec ecu. it has a obd1 pr4 ecu so now i need to find a vtec ecu. later that day i pulled the front tires off to inspect everything and what would ya know the outer tie rod had no nut on it. the thing was just sitting there. it also has a skunk 2 suspesion. i tried to fix the front seat belts they are the ones that are motorrized and move back and forth when you start the car. they wont go back when you start the car. i un hooked them and ran my own wires to them and they worked so i had them go all the way back. then i hooked them back up and when i started the car they moved back forward -damn
so i jumped the wires again and had them move back where i can at least drive with seatbelts and then un hooked them so it wouldnt move back forward until i find a diagram and i can fix them the right way. i was also able to fix my dome light and clock everything seems to be working now, i just need to figure out my fog lights they dont work, that will be my quest today.

http://i889.photobucket.com/albums/ac91/unholy_mitch/0918090925.jpg

ill post up more pics later today.

Ignition-Black/Yellow-Ignition Switch Harness
Ignition 2-Blue/White-Ignition Switch Harness
Accessory-Yellow-Ignition Switch Harness
Door Trigger-Green/Red (negative)-Passenger's Kick Panel

hook it to the first three if you just want it to move back when the car is on or you can hook up a relay to the door trigger then hook up the wire to it so it will move with the door if you need a relay diagram just ask

so what do i do bypass the seat belt computer? gimme some more info on this if ya dont mind

Well I'm pretty sure if you just want it to stop working you unplug it. But if you want it to move the belt forward when the car is off or when you open the door you just hook up a relay so that the relay is powered by the ignition and the trigger would be the negative... well let me get it straight before I give you a sure answer. The belt moves forward when it doesn't have a positive input and moves backward when it does have a positive input?

yea i want it to work the right way. does it work off the ignition switch cause it has a bad ignition switch. i can turn the key on but cant start it with the key i have to use a push button.

im workin on my factory fog lights today. and maybe a few other things.

god damn this car is in horriable condition, good luck with everything i hate electrical problems

it could be the ignition i have no idea what kind of hack job they've done on it

Believe me it feels great once you fix everything wrong with the car. Mine wasnt in that horrible of condition but was missing quite a bit of stuff.

well i finally got my factory fog lights working the right way today. also replaced alot of blown bulbs. heres some pics of what i've been working on the past 2 days.

inspecting the front end.
http://i889.photobucket.com/albums/ac91/unholy_mitch/0918090918.jpg

changing all the bulbs.
http://i889.photobucket.com/albums/ac91/unholy_mitch/0921091419.jpg

rewiring the ecu the right way.
http://i889.photobucket.com/albums/ac91/unholy_mitch/0921091425.jpg

the blue wire i havent figured out where it leads to. so i havent been able to wire into the ecu
http://i889.photobucket.com/albums/ac91/unholy_mitch/0921091426.jpg

all my lights work now
http://i889.photobucket.com/albums/ac91/unholy_mitch/0921091833.jpg

http://i889.photobucket.com/albums/ac91/unholy_mitch/rearlights.jpg

Looks like you have the same fart can I have or similar.

carbon fiber fart can.

carbon fiber fart can.



:confused:

it looks like carbon fiber. i tried to get a name off it but didnt see one.
i do know its loud as hell when vtec kicks in

Mine is quiet at idle but loud as hell when it is in the high rpms. I thought you dont have a vtec ecu?

i dont hehe.... vtech on a toggle switch yo!

i dont hehe.... vtech on a toggle switch yo!

where can i gets a vtechhhh switch for my d15b7 yo!? :D

BUY A VTECH CONTROLLER YO. you can get them at walmart.



http://i889.photobucket.com/albums/ac91/unholy_mitch/vtech.jpg

i love those tailights
and dont you love ECU wiring? fun stuff

actually if you get a really good diagram its really easy. ive rewired a few in my time including dpfi to mpfi and other swap stuff.

mannn, I found like the exact integra near by, my parents are telling me to wait 6 months before i buy a car.. annoying I want a civic/teggy now!!!

Check this though, looks pretty similar ,

http://stjohns.kijiji.ca/c-cars-vehicles-cars-Acura-Car-for-sale-or-trade-W0QQAdIdZ149210973

sexxxyyyy not gonna lie

yea thats nice just debadge it and get rid of those rims (mine also needs a windshield). i like my teg alot more than my sedan. it just needed someone to finish up the half ass work that someone else did. but now it runs great and pulls hard.

actually if you get a really good diagram its really easy. ive rewired a few in my time including dpfi to mpfi and other swap stuff.

i still dont like it
and all ive done is VTEC and 02 sensor for my old mini-me (93 cx)

hey 94CHB, on that link I posted of the teggy, look at the engine bay picture, is it just me or is the stock intake half missing?

they have one on it just some wierd type looks homade

http://img1.classistatic.com/cps/kj/090816/725r6/07544k3_20.jpeg (http://stjohns.kijiji.ca/c-ViewAdLargeImage?AdId=149210973&back=-1&ImageIndex=0)

my rear suspension is now officially broke..lol

http://i889.photobucket.com/albums/ac91/unholy_mitch/0924091341.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/0924091348.jpg

better explanation on brokeness?

well heres what was left off my coilover sleeve that i found.
http://i889.photobucket.com/albums/ac91/unholy_mitch/0924091342.jpg


ok so ive been having problems with the car once in a great while not wanting to start.
so i figured today ill pull the main relay and check the solder points. well after hunting for it for about 25 mins under dash i finally found it. it isnt in the same place as a civic.
and once i pulled it off and brought it inside the house and with a good light i was shocked at how many connections were bad(cracked).

found it!
http://i889.photobucket.com/albums/ac91/unholy_mitch/0924091606.jpg

bad spots.
http://i889.photobucket.com/albums/ac91/unholy_mitch/mainrelaybroken.jpg

fixed.
http://i889.photobucket.com/albums/ac91/unholy_mitch/0924091602.jpg


so far i havent had any problems what so ever. :)

nice fix
and damn the previous owner really f'ed some stuff up

ok today i got more parts,

my new antenna( was missing when i got the car,
http://i889.photobucket.com/albums/ac91/unholy_mitch/0926091617.jpg

got my new outer tie rod for the driver side, the original one had no nut it was just sitting there and also the rubber is all torn, and they boogered up the threads.
ill post more pics when i change it out and also ill make a diy thread about how to change them.
http://i889.photobucket.com/albums/ac91/unholy_mitch/0926091711.jpg

heres my old steering wheel
http://i889.photobucket.com/albums/ac91/unholy_mitch/0926091710.jpg

and heres my new steering wheel from kevins(315customz) integra.
http://i889.photobucket.com/albums/ac91/unholy_mitch/0926091740.jpg

i havent decided which one i should keep, mine is worn on the top of the wheel and i dont like it, but i like how it looks.


ive also ordered alot more missing parts today and when they arrive ill post the pics.

bahahahahahaha lulz at the old steering wheel.... looks like something off the predators ship

ok well today i replaced my outer driver side tie rod, im gonna make a diy thread about it but here is some pics,

the tie rod was just sitting there they had no nut or pin in it, and it was in really really bad shape,
http://i889.photobucket.com/albums/ac91/unholy_mitch/0927091253.jpg

compared to new one
http://i889.photobucket.com/albums/ac91/unholy_mitch/0927091304.jpg

new one installed
http://i889.photobucket.com/albums/ac91/unholy_mitch/0927091311.jpg

Be careful with them sliding seatbelts. If you redo the wiring make sure to fuse it properly. These suckers are known to cause fires when they get stuck...

i just jumped the wires and made them go back and then unplugged them, ill just buckle buckle up by hand.

ok so today my rear suspension came in,, the ups man is like fukn santa clause when you see him you smile. its now fixed yea! feels alot better. ill post ya'll some pics tmw.
i'm also waiting on all the interior peices that i was missing and a hood prop, speedometer cable, and my rear seat belts. i got a great deal for 70$ shipped for everything. and next week im planing on getting my new windshield.

wow dude your really dumpin some cash into this car why didn't you just put it into the hb? even tho i like the integra

i like ""fixer uppers"" it give me something to do, i dont live in the city, there is nothing to do. so i ""tinker" with my cars to pass the day. i havent spent that much into this car. i'd say so far ive spent around 200$ and still gotta put a windshield(150$). once im done fixin her up im gonna start a boost project on it.

o sounds like fun my current project car is a 93 eclipse with a cf hood and body kits all around and a carbon fiber shift boot and i got it for $350 lol so i figured why not lol

We get older Tegs in our Pull-A-Part all the time that are in decent shape. Let me know if there are any small things you cant find and Ill see what I can pull.

^ yes lol, i need a few things
ive been buying alot of the parts from a ebay user that is parting out one.

i need a hood prop, and on the climate control i need the lever out of it,
ill post a pic in just a sec. also on the back driver side, where the back seat is i need the little square panle piece mine is missing.


i also got alot of stuff today in and i will get it typed up and pics post of what all i did today.

http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091136.jpg


http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091239a.jpg

ok well i dont fell like typing a whole lot of all i did today but heres a few things i fixed.

first my package arrived today.with all my parts i ordered.
http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091054.jpg


ok well here was my busted rigged fuse box under my hood and it was missing the cover.
http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091207.jpg

heres the new one installed.
http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091220.jpg

http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091220a.jpg


my new bottom seat belts the old ones ...well were melted ..yea i said melted.
it looked like they had a amp wire over it and it shorted out.
http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091228.jpg

i also got my missing door jam panels.
http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091239.jpg

painted and replaced my driver side pillar
http://i889.photobucket.com/albums/ac91/unholy_mitch/1001091643.jpg


they forgot to send my rear seat belt and i also ordered a seepometer cable.

and i worked pretty much all day on getting the automatic seat belts to work the right way.

ill post more for you guys tmw. im going to do a battery relocation since i have a big ass battery in my engine compartment, also i will be doing a small wire tuck to make it look better. and im waiting on my cold air intake.

Download Firefox you phudgin homo

its a joke u homoginzed fa-hag i has firefox, and gets on aim

AIM buttsects going on here?

get on aim and find out ;)

ok so today i bought a new valve cover gasket kit and a new thermostat for my teg 50$
damn dohc are expensive. tmw im gonna paint the valve cover and clean the bay up alittle and do a minor wire tuck ill post pics when im done.

well today i got my new cam seal, rear seat belt, and a new pcv valve.
i also started my wire tuck while i was at it, and when i pulled my injectors off one of them is cracked so im gonna need to replace it.


old cam seal (was leaking oil)
http://i889.photobucket.com/albums/ac91/unholy_mitch/1007091425.jpg

new cam seal
http://i889.photobucket.com/albums/ac91/unholy_mitch/1007091426.jpg

cutting the wire harness to do my wire tuck on the intake manifold
http://i889.photobucket.com/albums/ac91/unholy_mitch/1007091552.jpg

ill be able to take more pics tmw but this is what i took i was getting dark,
i also repainted my valve cover and ripped out alot of rigged wiring and fixed almost everything the right way.
http://i889.photobucket.com/albums/ac91/unholy_mitch/1007091423.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/1007091821.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/1007091826.jpg

hahahaha loves the sig.

and your teggggg <3

Theres still time to get a block of wood and some 1000 grain sandpaper and polish the letters on that valve cover...

Otherwise, good work on fixing the electrical problems. I would hate to roll with ghetto rigged wires.

Theres still time to get a block of wood and some 1000 grain sandpaper and polish the letters on that valve cover...

Otherwise, good work on fixing the electrical problems. I would hate to roll with ghetto rigged wires.

+1 Its one of my pet peeves

Theres still time to get a block of wood and some 1000 grain sandpaper and polish the letters on that valve cover...

Otherwise, good work on fixing the electrical problems. I would hate to roll with ghetto rigged wires.


well im gonna give it about a day to dry real good then im gonna sand it,
yea i hate rigged wires also, the fans were on a toggle switch, a few other rigged wires, i fixed all that today and also i did a wire tuck on my intake manifold engine harness, the harness is now under my intake manifold. ill get ya'll some better pics tmw. it was getting dark when i finally finished up for the day. i'm gonna order me a cai and relocate my battery to the trunk.

oh and i also tuck my clutch cable back under the intake manifold.

lookin good

so today it finally wasnt raining and i got off my fat ass and installed my last seat belt so now all seat belts work, the old one was cut out.
im going to walmart now to get some sand paper and then im gonna sand my valve cover letters down and polish them up. i also bypassed the valve cover hose that goes to the intake piping and put a little red filter on the valve cover.everything is coming along pretty good, i was gonna get my new windshield done this weekend but instead of buying my windshield i bought the wife a great dane puppy for 400$, that means i can now spend 800$ on my teg right? ;) the dad of the pup is 2 yrs old and 7ft(on his back legs) and weighs over 200lbs. lately ive been lookin in trying to find a honda crv and trade my hatch and/or my teg for it. ill get some more pics up for you guys later.

No to CRV. And 400 on a dog? cmon Man. Get a tiny little hyper annoying mut. they are fun.

a CRV? Why?

yeah why a crv? ugh.

only reason to buy a crv?
put its motor in my car yo

^ lol

only reason to buy a crv?
put its motor in my car yo

Very true. Sometimes, if I wasnt so nice I would wish girls that I know would total theirs and just magically hand over the remains with an untouched engine :D

crv getting rear ended FTW!
lol

cause i bought a great dane and im gonna need the room. and they come awd with a b20. and i have 2 kids so i kinda need the room

yous should put said awd and said b20 into your hatch

Damn, I feel so young. lol

cause i bought a great dane and im gonna need the room. and they come awd with a b20. and i have 2 kids so i kinda need the room

how old are you?

i know
i know
pick me

i iz dis many llll

40???? no...

no
cut it in half then add a couple

22???

moar

damn 5 limit

He is 16

ok so on the coldest day this week my damn heat dies, gawd it was so fukn cold driving with no heat and cold ait coming i the car, so i had to pull apart my dash and remove the whole complete blower motor assembly, after i pulled it out of the car i sat down on my porch and disassembled the motor and the brushes/springs on it were rusty and really dirty, i cleaned the hell out of it, then i wd-40 the hell out of it, i then reassembled it, put it back in my car and now it works 10x better.

http://i889.photobucket.com/albums/ac91/unholy_mitch/1020091222.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/1020091223.jpg

dizamn man. what a turnaround ur teg has made. still love the teg!!!!!!!!

impressive 94chb, you got to the polishin of the valve letters?

yea i started the other day, ill get ya some pics of it.

here is a pic of the valve cover now, im not done yet, im doing little by little ive been pretty busy lately,

http://i889.photobucket.com/albums/ac91/unholy_mitch/1021091646.jpg

are the words poking out or in?

out
stupid five letter rule

wouldnt paint get on the sides of the letters since there poked out? or do you just sand paper / polish the top

just paint it then just sand down the top of the letters
i used 400 grit to sand paint off then 800 to polish it

oh okay, thanks.
(sorry for making this a thread jacker)
my valve cover doesn't have paint so i'd sand it 1st correct?

i took mine off removed all the seals out of it, sanded the rough loose stuff off, then washed it, let it dry, then primed 3 coats, painted 5 very light coats, then 2 coats clear. then i let it sit out in the sun for about 3 hrs then very carefully put all my seals back on it then istalled it on my motor, then about 4 days later i sanded the letters and then washed it off with water.

just a heads up im, in the process of relocating my battery and im doing more of my wire tuck, so far its looking pretty good, my engine bay looks like its missing something there is just so much extra room. ill post up pics for ya real soon, just gotta finish up a little more.

ok well heres some pics like i promised, im tired and called it a day so im not finished yet,

heres a befor pic, i had already took the battry out,
http://i889.photobucket.com/albums/ac91/unholy_mitch/1026091140.jpg

the wires im relocating
http://i889.photobucket.com/albums/ac91/unholy_mitch/1026091207a.jpg

im cutting the taped up wire harness and redoing it for the tuck
http://i889.photobucket.com/albums/ac91/unholy_mitch/1026091217.jpg

i unplugged the lights to relocate the harness,

http://i889.photobucket.com/albums/ac91/unholy_mitch/1026091207.jpg

this is where i finished at for the day, what a big difference
http://i889.photobucket.com/albums/ac91/unholy_mitch/1026091234.jpg


also i was able to get a spark plug cover at the meet yesterday for $5 im gonna repaint it but heres a pic
http://i889.photobucket.com/albums/ac91/unholy_mitch/1026091150.jpg

lookin good

ok well, my alternator went bad , it needed to come out so i can replace it, only 1 problem it wouldnt come out easy, i had to take my intake manifold off to get it out, there wasnt any room to get it out any other way,

http://i889.photobucket.com/albums/ac91/unholy_mitch/1118091541.jpg
http://i889.photobucket.com/albums/ac91/unholy_mitch/1118091542.jpg

new alternator
http://i889.photobucket.com/albums/ac91/unholy_mitch/1118091542a.jpg

the way it sits right now,
http://i889.photobucket.com/albums/ac91/unholy_mitch/1118091608.jpg

i'm washing up the intake manifold so tmw i can paint it, thats right in my bathtub with a toothbrush.
http://i889.photobucket.com/albums/ac91/unholy_mitch/1118091645.jpg

Color of paint which will be laid on it? Ugh, paint that spark plug cover while your at it!

primered ready to paint


http://i889.photobucket.com/albums/ac91/unholy_mitch/1119091125.jpg



a couple coats of red,
http://i889.photobucket.com/albums/ac91/unholy_mitch/11190915032.jpg

im gonna have more pics tmw, i still gotta install it, yeah i know about the spark cover, i bought it for 5 bucks and thats how it came, i just havent decided on what color i should paint it.

hmmmm i hope that doesnt look too ricey

it looks pretty good, ive done it to my 91 hatch back in the day, ill have a pics tmw.
you gotta remeber its a stripped intake mani so it does look odd being all red, but with everything put on it , it came out pretty good.

http://i889.photobucket.com/albums/ac91/unholy_mitch/97371327_m.jpg

it looked sweet flat black!

http://i889.photobucket.com/albums/ac91/unholy_mitch/1120091300a.jpg
ill just leave this here kthx

i have more work to do on it, but its gonna look good

Now the valve cover and IM don't match! (At least from what I can see) It could also just be that the IM has brand new paint on it. I think black for the IM, red for the VC, and black for the spark plug cover would be best IMO.

Mitch, im dissapointed in you, your sleeping on the couch from now on =/

its the same paint from the same can, it will fade a little and match, its just fresh paint, i went and just bought me a dremel, im gonna polish some stuff up on it,