ECU Tuning & Fuel Management Discuss electronics and related components within.

getting code 1 on 90 civic dx

  #1  
Old 07-28-2005, 12:33 PM
baker7598's Avatar
Thread Starter
Join Date: May 2004
Location:
Posts: 25
Default getting code 1 on 90 civic dx

Anyone know what to about this code #1?
 
  #2  
Old 07-31-2005, 09:56 PM
Join Date: Jul 2005
Location:
Posts: 427
Default RE: getting code 1 on 90 civic dx

Oxygen sensor or circuit
 
  #3  
Old 02-09-2006, 08:54 PM
baker7598's Avatar
Thread Starter
Join Date: May 2004
Location:
Posts: 25
Default RE: getting code 1 on 90 civic dx

I'm still getting the code. Heres a pic of where I broke the orignal connector and replaced it with a makeshift one. Could this be my problem? Where is the circuit and sensor at? Have a brand new O2 sensor.

http://pg.photos.yahoo.com/ph/k_brow...e2.jpg&.src=ph
 
  #4  
Old 02-13-2006, 01:32 PM
jwsimons's Avatar
HCF Member
Join Date: Jan 2005
Location:
Posts: 1,010
Default RE: getting code 1 on 90 civic dx

double check your wiring with a continuity tester, if its good then reset your ecu by removing the fuse from the underhood fusebox for about 30 or so seconds, then riun your car for about 5 minutes with no load and check your ecu again
 
  #5  
Old 02-13-2006, 02:15 PM
baker7598's Avatar
Thread Starter
Join Date: May 2004
Location:
Posts: 25
Default RE: getting code 1 on 90 civic dx

which fuse do i use to reset this code?
 
  #6  
Old 02-13-2006, 07:09 PM
jwsimons's Avatar
HCF Member
Join Date: Jan 2005
Location:
Posts: 1,010
Default RE: getting code 1 on 90 civic dx

in the fuse box under the hood, the lid has a list of fuses and their application right on top of it, its usually the second one down, but look for ecu, if you do not find the fuse, you can disconnect your battery, but then you have to reset radio presets etc.
 
  #7  
Old 02-13-2006, 10:41 PM
baker7598's Avatar
Thread Starter
Join Date: May 2004
Location:
Posts: 25
Default RE: getting code 1 on 90 civic dx

DUh on my part. I should have known to look on the cover.

Okay did that and checked the o2 wire coming from the engine and have power.
But that stupid red light is coming on under the passenger carpet again. Any other tips?
 
  #8  
Old 02-13-2006, 11:16 PM
jwsimons's Avatar
HCF Member
Join Date: Jan 2005
Location:
Posts: 1,010
Default RE: getting code 1 on 90 civic dx

yea, id have to say that your o2 sensor is dead... a universal is like 26.00...
 
  #9  
Old 02-14-2006, 01:44 PM
baker7598's Avatar
Thread Starter
Join Date: May 2004
Location:
Posts: 25
Default RE: getting code 1 on 90 civic dx

Hey thanks for the info...
 
  #10  
Old 02-15-2006, 11:24 PM
jwsimons's Avatar
HCF Member
Join Date: Jan 2005
Location:
Posts: 1,010
Default RE: getting code 1 on 90 civic dx

n/p
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tomp
Mechanical Problems & Technical Chat
0
10-11-2011 01:35 PM
tomp
Mechanical Problems & Technical Chat
0
09-30-2011 06:41 AM
fattyjon2002
ECU Tuning & Fuel Management
1
05-12-2010 03:33 PM
Revn7
Audio/Visual & Electronics
1
08-31-2007 05:09 AM
tenney
Mechanical Problems & Technical Chat
2
08-15-2005 09:04 AM


Thread Tools
Search this Thread
Quick Reply: getting code 1 on 90 civic dx



All times are GMT -8. The time now is 09:03 PM.