90 Honda D16Z6 build
#1
90 Honda D16Z6 build
So I am getting rid of the D16A6 I have and throwing in a D16Z6 motor. Here is what I am planning to get.
-YCP Vitara pistons (75mm)
-Wrist pins and C clips
-Piston rings (Hastings)
-Timing Belt
-Water Pump
-ACL Rod Bearings
-ACL Main Bearings
-ACL washers
-ACL Race Bearings
-Full engine Gasket & Seals set--> Head gasket (approx .030 thickness)
-Eagle 'ESP' H-Beam Connecting Rod Sets
-AEM True-Time Cam Gears
-Supertech Spring / Retainer Kits
-Supertech Valves
-Crower Crank
-T04E Turbocharger
-CIVIC D16 TURBO MANIFOLD W/ EXTERNAL WASTEGATE FLANGE
-HKS SUPER SEQUENTIAL BOV
Then of course downpipe,chargepipe, wastegate,intercooler, oil lines,ems,fuel system.
This is what I have so far. Input is greatly appreciated
-YCP Vitara pistons (75mm)
-Wrist pins and C clips
-Piston rings (Hastings)
-Timing Belt
-Water Pump
-ACL Rod Bearings
-ACL Main Bearings
-ACL washers
-ACL Race Bearings
-Full engine Gasket & Seals set--> Head gasket (approx .030 thickness)
-Eagle 'ESP' H-Beam Connecting Rod Sets
-AEM True-Time Cam Gears
-Supertech Spring / Retainer Kits
-Supertech Valves
-Crower Crank
-T04E Turbocharger
-CIVIC D16 TURBO MANIFOLD W/ EXTERNAL WASTEGATE FLANGE
-HKS SUPER SEQUENTIAL BOV
Then of course downpipe,chargepipe, wastegate,intercooler, oil lines,ems,fuel system.
This is what I have so far. Input is greatly appreciated
#5
im gonna have a similar setup but with lots of headwork too
im gonna be using a t3 or a t3/t4 (prolly this one since i have it laying around)
or if i get impatient ill just use one of the greddy kits i have laying around lol
im gonna be using a t3 or a t3/t4 (prolly this one since i have it laying around)
or if i get impatient ill just use one of the greddy kits i have laying around lol