General Civic Talk Talk about the Honda Civic generally here.

oem ek9 & replica parts

Thread Tools
 
Search this Thread
 
  #11  
Old 02-03-2010, 11:28 PM
JayVee's Avatar
HCF Member
Thread Starter
Join Date: Aug 2009
Location: San Diego County, CA
Posts: 888
Default

SPLATV6, new/used or replicas.
Originally Posted by trustdestruction
CTR shift boot

CTR Gauge Trim
Actual CTR Cluster (you'd have to call them to find out if it's in stock... you can also find it on Honda-Tech, i've seen tons on there

Also, CTR carpet it for RHD. You don't want CTR carpet. Use red carpet from stockinteriors.com (type-R red is under "JDM Cut Pile")

CTR door panels are RHD and have the power window and power lock switches on the wrong side of the car. You would have to rewire the power lock and power window circuits in the car and it would be pointless because it's on the wrong side of the car. Try just making your own red door panel inserts for where the fabric is.
simply amazing. thanks for this trust.
where could i get the door panels inserts? also what about the power mirrors and front/rear seats? (any other good looking seats in eks?)
 
  #12  
Old 02-03-2010, 11:41 PM
JayVee's Avatar
HCF Member
Thread Starter
Join Date: Aug 2009
Location: San Diego County, CA
Posts: 888
Default

also i noticed that ek9's have a black interior (http://www.ek9.org/forum/attachments...s-img_0109.jpg)
do any usdm hatches have blackinterior? or are they all grey.
 
  #13  
Old 02-03-2010, 11:42 PM
trustdestruction's Avatar
Moderator
Join Date: May 2007
Location: FL
Posts: 11,417
Default

For power mirrors you gotta swap the floor harness in the cabin of the car for one from an EX coupe (or Si I guess), kind of a pain in the ***. Then you need the door wire harnesses, the switch, and the mirrors. Then you may want to get the power mirror inner covers (black plastic triangle piece on other side of door from the mirror). There may be a control box (computer) for the mirrors, i'm not sure. There's one for locks and one for windows so there may be one for mirrors, idk.

If you're gonna do all this you should go all out and get the OEM power lock actuators (they actually just bolt onto the existing manual lock mechanism, really simple), and power regulators. If you go this route you'll need EX or Si door panels.

Try to find a 96-00 EX or Si at a junkyard and grab everything you need.


I like my GSR front seats, I think they would look good in a 96-00 Civic... you can usually find a set of black leather ones for ~$200. Swap the seat rails from your old seats on and it's direct fit. I don't know anything really about back seats... hell, I don't even have any


Not sure about door panel inserts... I think addiction2bass posted a DIY or something about reupholstering them.
 
  #14  
Old 02-04-2010, 12:14 AM
trustdestruction's Avatar
Moderator
Join Date: May 2007
Location: FL
Posts: 11,417
Default

Here's a DIY on headliner replacement. Just get whatever fabric you want.
 
  #15  
Old 02-04-2010, 01:09 AM
JayVee's Avatar
HCF Member
Thread Starter
Join Date: Aug 2009
Location: San Diego County, CA
Posts: 888
Default

what's the exact color of the ctr headliner?
 
  #16  
Old 02-04-2010, 05:44 PM
SPLAT's Avatar
HCF Member
Join Date: Oct 2006
Location: New York/Up state
Posts: 1,996
Default

Originally Posted by JayVee
what's the exact color of the ctr headliner?
A very dark gray, (ICB) JDMLand.com is selling a new headliner....i think its was about 3 to $400.00
 
  #17  
Old 02-07-2010, 07:11 AM
maroon's Avatar
HCF Member
Join Date: Dec 2007
Location:
Posts: 68
Default hey

check this site http://www.shop.interior-customs.com i hope it will help you
 
  #19  
Old 02-10-2010, 01:06 AM
JayVee's Avatar
HCF Member
Thread Starter
Join Date: Aug 2009
Location: San Diego County, CA
Posts: 888
Default

Originally Posted by maroon
check this site http://www.shop.interior-customs.com i hope it will help you
damn sweet! haha thanks alot man.

and chrismag, i'm just getting ideas for my next car/project.
 
  #20  
Old 02-10-2010, 01:26 AM
trustdestruction's Avatar
Moderator
Join Date: May 2007
Location: FL
Posts: 11,417
Default

ah, nice site for what you need

door inserts for sale there

http://www.shop.interior-customs.com...c?categoryId=3
 


Quick Reply: oem ek9 & replica parts



All times are GMT -8. The time now is 01:23 AM.