Go Back   HondaCivicForum.com > Your Ride > Transmission & Differential




Reply
 
Thread Tools
  #1  
Old 11-07-2005, 08:03 PM
es2001civic es2001civic is offline
 
Join Date: Nov 2005
Location: New York
Posts: 123
Default How realiable are honda Transmisions?

Im new to honda guys. Ive had just about the worst transmissions problems ever with my old car. I had 7g Gallant with a 4g64t engine in it. In 2 years i went through 4 transmissions. My stock Auto was destroyed in 2-3 months.The second auto tranny I instaled a B&M tranny cooler that one died 5 months. I payed extra for a swap. A manual tranny only have that one die in 6 months. Conclusion Dont use Cottmon Transmission ever!!!!!!!!!! they hasle the crap out of you for your warranty and try to blame you for there crapy work not to mention charge ya for bullSh*t fees after fis there work. They build glass Trannies not to mention that mitsubishi's doesnt have much of a realiable transmission in the first palce. I wasted a total of 4k on cottmans crapy work. ALL of these tranies where rebuilt with or built from scratch off after market parts(suposedly).I finaly ended up getting another tranny from a local shop in Queens because a friend refered me to them and the car was great. I never got to see how long it would last . I totataled the whole car a few months later.

But oh ye back on the subject. How good do honda tranies hold up to decent power? HOW reliable have they been?
__________________
Reply With Quote
Sponsored Links
  #2  
Old 11-07-2005, 08:44 PM
Toppers Toppers is offline
 
Join Date: Sep 2005
Location:
Posts: 115
Default RE: How realiable are honda Transmisions?

Well, I've owned two Honda's with over 150k on the clock, and they still shifted smooth years later. My 15 year old Integra which I just retired, you couldn't tell that gearbox from a new one really.. I think it's safe to say Honda makes some of the best transmissions.

My friends 2 year old Ford Explorer just lost its transmission, now that's some funny ****.
Reply With Quote
  #3  
Old 11-07-2005, 09:06 PM
mill$civic mill$civic is offline
Moderator
 
Join Date: Feb 2005
Posts: 8,490
Default RE: How realiable are honda Transmisions?

iv heard they are very reliable too..when i worked at a shop the only tranny problem we had was a guys car was to low and he cracked the casing...but this one guy was saying you can miss shifts all day and you will still be fine, i hope everyones right about the reliablity cuz i learned how to shift on my civic
__________________

Member since Feb 2005
Reply With Quote
  #4  
Old 11-08-2005, 03:21 AM
shellebelle shellebelle is offline
 
Join Date: May 2005
Location:
Posts: 426
Default RE: How realiable are honda Transmisions?

There's been some issues (and a recall) on the 5sp auto trannies that are hooked up to the more powerful engines--such as the 2002-2004ish Odysseys, Pilots, some Acura models, etc. Personally, I'm a little unsure about these models, but my worries may be unfounded.

I wouldn't worry about the trannies on the four bangers. Those puppies are solid.
__________________


Quote:
ORIGINAL: Mossy

thats right, shelle keeps it real...
Reply With Quote
  #5  
Old 11-08-2005, 10:33 PM
sacicons sacicons is offline
Senior Member
 
Join Date: Jun 2004
Location:
Posts: 7,719
Send a message via AIM to sacicons
Default RE: How realiable are honda Transmisions?

they usually hold up to years of abuse, with somewhat crappy synchros. so a 3rd gear grind is not uncommon after a few years of hard driving and competition. but catastrophic failure is pretty rare. i drove my stock tranny with just about every bearing in it shredded into dust for over a week. you should have seen the play on that thing when i took it apart[:@] lets just say, a cracked bellhousing is bad. it lets dirt into the input shaft bearing, which causes hell with that, and then the chunks of that cause hell with the rest of the bearings.
__________________
Yes, there's a "Replacement for Displacement". Its called Volumetric Efficiency.


Quote:
ORIGINAL: Forty04

I choose the rear ending
Reply With Quote
  #6  
Old 11-10-2005, 08:18 PM
se7ensectoolate se7ensectoolate is offline
 
Join Date: Jan 2005
Location:
Posts: 1,049
Default RE: How realiable are honda Transmisions?

My stock RSX Type-S tranny held up for quite some time to 600 horsepower and alot of abuse.
Reply With Quote
  #7  
Old 11-17-2005, 03:19 PM
luilui luilui is offline
 
Join Date: Jul 2005
Location:
Posts: 8
Default RE: How realiable are honda Transmisions?

well I have a 97 DX with 57k and the trasmission is slowly failing...My mechanic told me that I have more or less 4 months until it dies on me and that 97 civic have a VERY high tranny failing rate!
I think I'll go for a used one for a whopping $1200
Thanks Honda!
Reply With Quote
  #8  
Old 11-17-2005, 10:21 PM
neon3kgt neon3kgt is offline
 
Join Date: Apr 2005
Location:
Posts: 1,023
Send a message via AIM to neon3kgt
Default RE: How realiable are honda Transmisions?

auto im guessing?
Reply With Quote
  #9  
Old 11-17-2005, 10:23 PM
sacicons sacicons is offline
Senior Member
 
Join Date: Jun 2004
Location:
Posts: 7,719
Send a message via AIM to sacicons
Default RE: How realiable are honda Transmisions?

1200 for a used 97 dx tranny? ive gotten them for like 50 bucks.
__________________
Yes, there's a "Replacement for Displacement". Its called Volumetric Efficiency.


Quote:
ORIGINAL: Forty04

I choose the rear ending
Reply With Quote
  #10  
Old 11-19-2005, 09:13 AM
shellebelle shellebelle is offline
 
Join Date: May 2005
Location:
Posts: 426
Default RE: How realiable are honda Transmisions?

My friend's '96 tranny (manual) bit the dust earlier this year, but I don't think that the car was very well cared for.
__________________


Quote:
ORIGINAL: Mossy

thats right, shelle keeps it real...
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors


New Sponsors
AMSOIL - Performance Oil Technology
K&N Engineering






All times are GMT -8. The time now is 12:28 PM.

© Internet Brands, Inc.
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.