i need opinions on what clutch would be best for me.. no crazy mods in mind.. probaly no more than 175whp.. i have been eyeing centerforce.. but i want some opinions and feedback of what other people have tried and if they were satisfied.. also would it be a problem using a clutch rated for higher horsepower than what i will have.. example (500hp clutch in a 200hp civic)..

you don't need to get an expensive clutch setup for a 500hp car. exedy stage 1's is all you need for a 175hp car. i'm runing that right now in my 210whp all motor itr

__________________
need any used parts.....hit me up i can probably help you

MY FOR SALE THREAD

I have a Stage 1 and it works great from exedy.

__________________
93' Del Sol D16z6 (Sold).
99' Civic Ex D16Y8 (Project D).
96' Civic DX Hatch. D16Y7 (Poor mans Type R.)
02' S2000 F20c (S2Turbo).

^Thats what im ordering!

__________________
1994 Civic coupe. B18C, A few Bolt Ons.

You could get a clutch for 500hp but your leg would get realy tired.

__________________

first off what are your mod's, engine, or plans for down the road?

im using a exedy stage 2 in a 2000 si at about 400whp and i cant launch off the 2-step b/c it starts slipping so im stepping up to a stage 3 or twin plate or maybe a exedy carbon

__________________
http://limaracing.myfastforum.org

if my clutch goes out, (its stock on a 90) what parts of the clutch do i need to replace??

__________________
Note: If you dont have engine mods, dont think your exterior mods are gonna make you go any faster!!

You usually would replace the Pressure Plate, FLywheel and throwout bearing also

__________________

IMMA EAT YOU

===================================

so i need the clutch itself, pressure plate and fly wheel?

__________________
Note: If you dont have engine mods, dont think your exterior mods are gonna make you go any faster!!

and the throwout bearing

__________________
Note: If you dont have engine mods, dont think your exterior mods are gonna make you go any faster!!