I am listing some stuff for sale. No REASONABLE price will be turned down. We can talk shipping once a deal is cut. More than likely I will cover 1/2 the cost. All items are in Freehold NJ, pickup is available. Everything is in GREAT condition. If multiple items are purchased a special price may be able to be worked out. I will only accept paypal or cash upon pickup.







Thank you.







Golden Eagle Vac Manifold, With connections. $15 shipped
http://i38.photobucket.com/albums/e122/pcupo12/VacMani.jpg


D16Z6 Hondata Intake Manifold Gasket (lowers intake temps) $5 shipped
http://i38.photobucket.com/albums/e122/pcupo12/Hondata.jpg



S20 5 Speed Transmission (D Series SI Tranny) With Linkage. LOW LOW Miles. $200 OBO Picked uphttp://i38.photobucket.com/albums/e122/pcupo12/PB120027.jpg


Some items may be on ebay, in which case I as the seller reserve the right to sell to the highest bidder.

i thought you installed the arps in the d16z6?

damnit pete, you would have to post this on the week that i dont get paid!!! AHHHH! i want your tranny!!!!

ORIGINAL: riceburner700

i thought you installed the arps in the d16z6?



Never got around to it.

how much do you want for the valve cover shipped to madison, wi 53715?

Damn man I about made an offer to you on the kit. Bump.......get at me on aim

is the d16z6 skunk2 intake manifold the same as the d16y8 intake manifold lmk and i call dibs

TB is mine.

pm sent on trans

Dizzy and vtec selenoid shipped to 49512?

alternater, starter, fuel rail, fpr, plug wires to 37664

ORIGINAL: Forty04

Dizzy and vtec selenoid shipped to 49512?


I think we could do this: I could pick up our parts from Pete and ship your crap in one box along with the head, so I can finally have my trunk back:-D

ORIGINAL: Roto


ORIGINAL: Forty04

Dizzy and vtec selenoid shipped to 49512?


I think we could do this: I could pick up our parts from Pete and ship your crap in one box along with the head, so I can finally have my trunk back:-D


sounds good to me

I dont have any of the other stuff, the shop im taking my car to is going to give me credit for that stuff.

BUMP!

id buy the intake manifold if you could do around 150.00 shipped

Pmed.

How much for spark wires, and ARP studs to 53027

PM'd.

Kind of a newb question, but would those be the ARP's i'd need to mount a z6 head onto a y8 block?

And are you saying that you don't have the vtec selenoid and all that ****?

Thanks for the response Pete. Too much, I can get them for less on ebay.

Valve Cover Sold.

If you still have the intake mani or tranny pm me.

ORIGINAL: zarembad

Thanks for the response Pete. Too much, I can get them for less on ebay.


Best Ive seen on ebay is $82.90 I beat that price. These are New In Box. 110% never used. The ARP Oil is there and everything.

ORIGINAL: Pete

I dont have any of the other stuff, the shop im taking my car to is going to give me credit for that stuff.


Does this include the head and **** attached to it?

Yea, the head is broke anyway. When the engine blew the piston was shot into the head, I could get it off.....so I began wacking it with a mallet (with a piece of wood inbetween)...........It would NOT come off bro.

well I didn't actually need the head itself, just the vtec selenoid, cam gear, dizzy, **** like that. Not a big deal

I might be able to help you. Ill talk to rob at CCP (where my car is) and maybe ill take the motor home with me

would you be willing to part with the gauges? shoot me a price.

Pete.... do you have an oil temp gauge?

I do not have an oil temp gauge and I dont wanna sell the gauges ive got...........I will sit on the turbo kit as long as ive got to. I dont NEED the $$ right now..........I will sell it when I find a buyer. (as a whole)

fiddle sticks.

Sorry buddy (BUMP)

ORIGINAL: Forty04

Kind of a newb question, but would those be the ARP's i'd need to mount a z6 head onto a y8 block?




Yea, the threads will fit the Z6 bottom end, and the top should be long enough. I dont think the Y8 head is bigger than the Z6, but im not 100%

ORIGINAL: Pete


ORIGINAL: Forty04

Kind of a newb question, but would those be the ARP's i'd need to mount a z6 head onto a y8 block?




Yea, the threads will fit the Z6 bottom end, and the top should be long enough. I dont think the Y8 head is bigger than the Z6, but im not 100%


But I have the y8 bottom end, and the z6 head. :D

Its all good i was only looking for a boost gauge unless you dont have a pos narrow band a/f gauge

BUMP

Where is the wastegate on that setup or is it internal? All I see is the greddy downpipe piece...

Its an internal wastegate..........there are pics of it..its the gold thing on the turbo.

My fault, what an idiot I am.

You gotta learn somewhere.

Pete did you get your engine back or what? I need a couple things.

ORIGINAL: Marty

Pete did you get your engine back or what? I need a couple things.


I havent been to the shop yet, lemme know what you need and ill see what I can do.

Turbo kit is on ebay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280052384836

^ any chance u wana say what the reserve is? btw I got a noob question, whats the exaust cutout for?

The exhaust cutout just give you the option to run an open downpipe (you remove 3 bolts and a metal plate) Its so loud. You can put the plate back on and run regular full exhaust again..........the E cutout is good for people who go to the track, turbo hits boost 10X faster with the open downpipe.

Reserve is like 1450.........but reasonable offers wont be turned down.

very interested in the Golden Eagle Vac Manifold. How much to 32203? Thanks

*32003*

$25 Shipped.

I'll take it. How do you want to arrange payment?

This is the titanium manifold correct?

Do you still have the trans? And will it fit on a '99 EX? And whats price shipped to 48146?

I dont think golden eagle makes an actual titanium manifold, thats just the color.....this one is brushed aluminum. Works flawlessly. Why dont you allow users to send you PM's? Write down my paypal adress so I can remove my email from this link, I dont want spammers getting it, so respond in the thread and let me know yo got the paypal addy written down. I will ship it out as soon as I recieve payment. Thanks.



Rukuxis the tranny WILL fit a 99 Civic. Shipping is going to be quite a bit to detroit. Idk how the hell id box it up man, this thing is heavy.

How much you think it weighs? It should fit into an old monitor box if you have one laying around. :D Whats your zip btw?

07728

You think it weighs more than 50lbs? And do you have the clutch by chance?

No clutch, yea it def weights more than 50 lbs bro.

I think this needs to be BUMPED!!!!!!!!!! MAKE OFFERS!

Turbo RELISTED. RESERVE IS 925!!!!!!!!!!!!!!!!!!!!!!!!! I cant believe im going that low!


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280055154690

Hey Pete, I got a few more questions.
1.) How did the turbo get oil on it? I think all used ones get that but I'm not sure.
2.) Do you still have the installation instructions?
3.) What psi spring do you have in the wastegate, I think its 10 so do you have one for 6 psi?

Thanks

125.00 shipped for the intake manifold. lmk

^ Sorry, thats way to cheap, the thing is like new, im even shipping it in its original box.

ok how much are you wanting for it. shipped

ORIGINAL: Mr Mobsta Man

Hey Pete, I got a few more questions.
1.) How did the turbo get oil on it? I think all used ones get that but I'm not sure.
2.) Do you still have the installation instructions?
3.) What psi spring do you have in the wastegate, I think its 10 so do you have one for 6 psi?

Thanks


All oil cooled turbos will get some oil inside the intake side, its not a lot. The wastegate is set at 5.5 psi from greddy. No instructions, I will show u where to get a DIY on it though.

Alright I got 2 last questions, are u selling the vac lines and stuff to hook up the bov and boost gauge, and the t fitting for the oil line? I don't realy mind buying new ones but it would just be a pain in the ass. The other question is that I thought that greddy kits come with injectors, I wouldn't need bigger ones for 5.5 psi would I?

Assuming that my car passes a compression test today I will probably bid on the turbo. thanks pete.

Ive got some vac lines, but idk how many. The lines and t's might cost 10 bucks lol. The kit doesnt come with injecors.......check out the DSMs or RCs

ORIGINAL: Pete


ORIGINAL: Mr Mobsta Man

Hey Pete, I got a few more questions.
1.) How did the turbo get oil on it? I think all used ones get that but I'm not sure.
2.) Do you still have the installation instructions?
3.) What psi spring do you have in the wastegate, I think its 10 so do you have one for 6 psi?

Thanks


All oil cooled turbos will get some oil inside the intake side, its not a lot. The wastegate is set at 5.5 psi from greddy. No instructions, I will show u where to get a DIY on it though.


How were you running 10psi, did you have another spring for it?

Manual boost controller dummy [sm=bananallama.gif]

Pete, not to be completely off topic in your fs thread, but how can you live in jersey and be a Cowgirls fan?

ORIGINAL: Pete

Manual boost controller dummy [sm=bananallama.gif]


christ....someone is not thinking outside of the box today

Or not thinking at all...dummy:-D

^ Your Throttle body was shipped, should be there in a few days.

do you still have the Vac Manifold, i noticed someone was looking for one in the "wanted" adds...

ORIGINAL: Pete

^ Your Throttle body was shipped, should be there in a few days.



You told me that already :-D[sm=signs007.gif]

BUMP for lowered prices!!!!!!!!!!!!!!!!!!!

Did you lower the price on the head studs yet?

ARP Studs are $65 shipped.

Studs sold.

ORIGINAL: Pete

Studs sold.


**** me, just when I was finally ready. Oh well, congrats on the sale!

Bump

TOP!

Turbo sold!

ORIGINAL: Pete

Turbo sold!


Congrats buddy!!

bought time:D

Hey, do you still have the tranny??

How good of condition is the Transmission in, and is 150 the lowest you'll go?

Bump, tranny still available

ORIGINAL: 95projcivic

How good of condition is the Transmission in, and is 150 the lowest you'll go?


I would sell it for 150 but thats picked up and as low as I can go.