Hi there, i`m new to this forum,so i thought i`d introduce myself.
My name is Nick, and i`m from the Netherlands. I used to drive Renualt`s, but made the switch to my Honda civic coupe 3 jears ago. Before that i had a R5 Gt turbo, Clio 1.8 16v, and a Meganè coupé. All very nice cars, but the last one fell apart alot and drove me nuts because of that. Thats why i decided to switch to Honda. My brother has a 1989 crx that he has driven every day for the past 10 jears, and it has never broken down or fallen apart!

So this is my ride....

Some specs:

*B16A2 swap
*Spoon intakefilter
*Spoon oilcap
*Spoon radiatorcap
*SRR engine mounts
*SRR oil catch can
*SRR coolant reservoir
*SRR adjustable camgears
*Arospeed groundwire kit
*Toda timingbelt
*Taylor battery relocater kit
*Fidanza flywheel
*Exedy clutch
*Hondata heatshield gasket
*Invidia catback
*Catalitic converter
*JCP exhaust manifold (mugen replica)
*KW variant 2 coilover
*DC sports strut upper rear
*Neuspeed crossmember rear
*Suspension Techniques anti swaybar rear
*Carbing 3 point strutbrace + brakestopper
*Vti front brakes
*Goodridge brake leads
*16" 5zigen ProRacer GN+
*Toyo Proxes T1-R 195/45/16
*Lightweightt aluminium lugnuts
*Type R frontlip
*Type R grill
*Carbon mirrors(spoon replica)
*Carbonfiber hood(on it`s way)
*Type R shift knob
*Leather seats (oem Honda)
*Honda Vtec controller

http://www.kingruler.nl/gallery/albums/album156/IMG_0174.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_0168s.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/DSC_0090s.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_2206.sized.jpg

My b16a2 in the donor car that`s going in in a few weeks. Right now it`s got a D16 in it.

http://www.kingruler.nl/gallery/albums/album156/IMG_1152.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_3724.sized.jpg

Already painted my valve cover:D

P.s: I appologise for any incorrect spelling or wrong technical terms if it occurs.

Nice ride! Now all you gotta do is switch out the tail lights for a set of 99-00 tails and youll be golden.

ORIGINAL: Remmy

Nice ride! Now all you gotta do is switch out the tail lights for a set of 99-00 tails and youll be golden.


Hahaha...you don`t know how many people told me that. I`m gonna change the tails, but 99-00 tails are no where to be found in Holland.

you can usually find them on ebay...most sellers will send them internationally so long as you're not from asia (lots of scams from there on ebay)

check with major part suppliers in the US, they ship internationally. Honda is also really good about sending factory parts internationally, but you will pay more for them.

good luck, and that's a nice looking car.

HOW DID U PAINT UR VALE COVER SO GOOD!?!?!

ORIGINAL: JohnnyTEAMDSR

HOW DID U PAINT UR VALE COVER SO GOOD!?!?!


Like this...

Smear the valve cover with paint stripper.
http://www.kingruler.nl/gallery/albums/album156/IMG_3695.sized.jpg

After that it looks like this....
http://www.kingruler.nl/gallery/albums/album156/IMG_3700.sized.jpg

When you have removed all the paint,go over it with some scotchbrite and put it in the dishwasher for like a half hour. Then it looks nice and clean.
http://www.kingruler.nl/gallery/albums/album156/IMG_3701.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_3702.sized.jpg

Later just mask off the parts of the cover that you don`t want to paint.
http://www.kingruler.nl/gallery/albums/album156/IMG_3710.sized.jpg

Shoot primer for aluminum.
http://www.kingruler.nl/gallery/albums/album156/IMG_3712.sized.jpg

And after that, color and heat resistant clearcoat.
http://www.kingruler.nl/gallery/albums/album156/IMG_3718.sized.jpg

And voila.
http://www.kingruler.nl/gallery/albums/album156/IMG_3724.sized.jpg

I see ROTM in this ones future. LOL

ORIGINAL: windcalmer

I see ROTM in this ones future. LOL


Maybe it`s a stupid question, but what`s a ROTM?

ORIGINAL: Nick b16

ORIGINAL: windcalmer

I see ROTM in this ones future. LOL


Maybe it`s a stupid question, but what`s a ROTM?




no question is stupid, there's just stupid people

ROTM = ride of the month

That s fricken sweet! Im going to check to see if we dont already have a DIY for this.


Edit: I can add it to another one we have.

welcome to the forum, very nice civic coupe nice work

ORIGINAL: windcalmer

I see ROTM in this ones future. LOL


i can feel that! +111111

welcome to the forum man, loving your ride, and that valve cover is sick!

ORIGINAL: Nick b16

ORIGINAL: JohnnyTEAMDSR

HOW DID U PAINT UR VALE COVER SO GOOD!?!?!


Like this...

Smear the valve cover with paint stripper.
http://www.kingruler.nl/gallery/albums/album156/IMG_3695.sized.jpg

After that it looks like this....
http://www.kingruler.nl/gallery/albums/album156/IMG_3700.sized.jpg

When you have removed all the paint,go over it with some scotchbrite and put it in the dishwasher for like a half hour. Then it looks nice and clean.
http://www.kingruler.nl/gallery/albums/album156/IMG_3701.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_3702.sized.jpg

Later just mask off the parts of the cover that you don`t want to paint.
http://www.kingruler.nl/gallery/albums/album156/IMG_3710.sized.jpg

Shoot primer for aluminum.
http://www.kingruler.nl/gallery/albums/album156/IMG_3712.sized.jpg

And after that, color and heat resistant clearcoat.
http://www.kingruler.nl/gallery/albums/album156/IMG_3718.sized.jpg

And voila.
http://www.kingruler.nl/gallery/albums/album156/IMG_3724.sized.jpg





omg ur king of valve covers lol how did u make the letters white white out gettin it on the cover..

Thanx for the positive reply`s guys. Feel right at home:D

@ JohnnyTEAMDSR: In the picture the letters look like their white. After i painted the color on i sanded the paint off the letters with some sandingpaper wrapped around a peice of wood to bring out the color of the aluminum. After that i covered it with the clearcoat. You could also mask off the letters or put some chapstick on it before painting.

Ow, and ROTM would be cool!!:D

This paint job is now in the DIY section so none of you will need to dig this thread up down the road.

http://www.hondacivicforum.com/m_392490/mpage_1/key_/tm.htm#392495

Welcome to the forum -- nice ride! I like the leather seats and awesome job w/the valve cover.

Oh, so I do a DIY on a USB portable charger and it doesn't get posted, but a totally bad ass vavle cover job does. ROFL J/K Remmy. LOL

sick exhuast header...

Sadly the header isn`t going in to my car. That was a project of a friend of mine that has his own company. But problems with the manufacturer led to a stop of the project.

wow i must say you are a new member that i have a lot of interest in. you car looks clean and sick as hell, along with your new valve cover. kudos to you on that man. have you looked into turboing your b16 when you get it in?

welcome to the forum

ORIGINAL: aryiman98civic

wow i must say you are a new member that i have a lot of interest in. you car looks clean and sick as hell, along with your new valve cover. kudos to you on that man. have you looked into turboing your b16 when you get it in?

welcome to the forum



Thanx dude.

Ive been playing with the idea of turboing my engine, but i really have a thing for N/A tuned engines. I`m still looking into my options. I dont have that much knowledge about the technical aspects of tuning.Thats why i join forums like these, to understand more about it. I know most things about engines, but turbo charging,thats like a whole fillosephy.

what color/kind of paint did u use on ur valve cover? i really like that color blue. nice ride bro!!

where did you get the carbon fiber spark plug cover

@ Scrapdoggydog: The color on the valve cover looks blue, but it`s more like purple.
It`s a color by Motip(don`t know if that`s a wellknown brand in the states)strait off the rack.
Don`t know the colorcode.

@ heymikey19: I believe the sparkplug cover is from a dutch company called JCP.
Don`t know exactly where it`s from cause a friend gave it to me. It`s supposed to be a spoon replica i think.

looks sick ive wanted one for awhile but just keep finding cheap knockoffs

Yeah i know, the real stuff always looks better. Too bad you can see that in the price aswell:D

i love your car! i just cant wait until i can actually work on mine.

Nick, Your car is sooo nice Love the valve cover and the leather! hey mikey nice damn Coupe!

Cleaned up my engine today, looks much better now.
Man, removing the gasket of the intake manifold was a bitch! But i got the job done....with a little help from my brother:D

Almost ready to swap this thing now. Stil waiting on the clutch to arrive, gaskets and some other smal stuf

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_3976.jpg

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_3979.jpg

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_3985.jpg

nice and clean, i like it man.

This thread makes me wish I had not gone to college...

I could be tuning my civic like a freak if I was back in my hometown. I have to work so much during the summers, I never have any time to hang out or work on other stuff. Such a bummer.

Maybe after college, I can get some of that done.

Man that car is looking sick. I wish I could get a better motor for my coupe. D15 blows...

Nice job on the VC. I was going to buy a pre-painted B16 VC, but now I'm going to do it myself. Cant wait to see the engine go in...

Got myself a new toy today.

Oem Honda Vtec controller. At least that`s what i was told.

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_4203.jpg

Thats cool and all but I wouldnt have got a vtec controller. There is really not much point in fooling with it because vtec is already at a premo setting by the factory. The only reason why you would want to fool with it in a since if if you have a large turbo to accomodate.

I thought it was kind of cool to have, since it was originally an option for an ITR and a friend of mine was selling it and that it`s a pretty rare part around here. Otherwise i wouldnt have bought it.

sheeeznet!
What a nice car! I really want those rims...

I want my car to be exactly like that. Stay on HCF so i can Nominate and vote for you in ROTM!

Painted yellow calipers would look sick.

ORIGINAL: johnny

I want my car to be exactly like that. Stay on HCF so i can Nominate and vote for you in ROTM!


Thanx dude! I`ll stick around:D

ORIGINAL: Nick b16

ORIGINAL: johnny

I want my car to be exactly like that. Stay on HCF so i can Nominate and vote for you in ROTM!


Thanx dude! I`ll stick around:D



No problem. Your car is nicely done!

Any updates?[sm=smiley2.gif]

Yeah, Hes running up for ROTM. Vote for him next month.

ORIGINAL: Remmy

Thats cool and all but I wouldnt have got a vtec controller. There is really not much point in fooling with it because vtec is already at a premo setting by the factory. The only reason why you would want to fool with it in a since if if you have a large turbo to accomodate.


+1, but you still get my ROTM vote ;):D

now thats impressive..very nice!! cant wait to get to work my own VC!!!

It`s been one of those expensive days:D

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_4227.jpg

haha a lot of people introduce themselves and kind of drop out of the scene...good to see that you've been around and active nick. Sweet buy!:)

Now we only have to wait on someOEM Honda parts and then start swapping. [sm=wootwoot.gif]

ORIGINAL: mybrokenblinker

haha a lot of people introduce themselves and kind of drop out of the scene...good to see that you've been around and active nick. Sweet buy!:)


Haha, some people are hard to get rid of:D

Like me[8D]

ORIGINAL: johnny

Like me[8D]


EXACTLY haha jk.

Got some more stuff for my engine swap today:D
Bolts,belts,gaskets,seals,sparkplugs and so on...

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_4231.jpg

Repared and resprayed aircopump

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_4233.jpg

Adjustable camgears

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_4234.jpg

nice, Hey nick, get your mod list goin to ROTM!

Worked on the engine swap some more with my brother and some friends,and got a little work done.
http://www.kingruler.nl/gallery/albums/album156/swap01.sized.jpg

Me,a friend,and my bro looking all technical........:D

http://www.kingruler.nl/gallery/albums/album156/swap02.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap03.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap05.sized.jpg

BYE BYE D16!!

http://www.kingruler.nl/gallery/albums/album156/swap06.sized.jpg

Nice and clean enginebay.

http://www.kingruler.nl/gallery/albums/album156/swap07.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap08.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap09.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap10.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap11.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap12.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap13.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap14.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap15.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap16.sized.jpg

Thats still the old valvecover btw. The new one will go in after the swap, to avoid damaging it.
Cleaned up the trunk a little bit and installed a Summit strut.
http://www.kingruler.nl/gallery/albums/album156/swap17.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap18.sized.jpg

Thats all for now. I`m just glad i`m finally getting somewhere with this.
It took a whole lot of time and energy finding,ordering the right parts, so i`m glad that i`ve got all the stuff i need to make it happen. Hope to get it done this weekend or the next.....i think,no sence rushing things though.

About this time next week you'll be feeling thevtec kicking in.... [sm=happy046.gif]

Update on my engine swap,thanks to my brother and a friend.

Flywheel and clutch
http://www.kingruler.nl/gallery/albums/album156/swap19.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap20.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap21.sized.jpg

Sandwichplate installed.
http://www.kingruler.nl/gallery/albums/album156/swap22.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap23.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap24.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap25.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap26.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap27.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap28.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap29.sized.jpg

http://www.kingruler.nl/gallery/albums/album156/swap30.sized.jpg

Well that`s the progress for now

wow, nice job, i painted my vc again, it came out pretty, nice, but im having adheasion problems, looks like i need some primer. cant wait to see this running, + 1 on the clean car.

After a loooooong time finally got some more work done.

Changed the header for a comptech.

http://www.kingruler.nl/gallery/albums/album156/IMG_5482s.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_5487s.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_5485s.jpg

The header was originally for an Integra, so some modifications were made, and we fitted a little pipe between the header and the cat.

http://www.kingruler.nl/gallery/albums/album156/IMG_5490s.jpg

Suspension Techniques swaybar and Neuspeed tie bar and brace were fitted.

http://www.kingruler.nl/gallery/albums/album156/IMG_5481s.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_5492s.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_5495s.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_5498s.jpg

Fitted the catch cans.

http://www.kingruler.nl/gallery/albums/album156/IMG_5501s.jpg

A friend of mine had a carbon airbox from a S2k left over that he wasn`t using. So he sawed off a piece and made it so it would fit in my enginebay.


http://www.kingruler.nl/gallery/albums/album157/2007_06130811060006.sized.jpg

Fitted the batterybox in the rear and messed around a bit with the brace in the trunk.

http://www.kingruler.nl/gallery/albums/album156/IMG_5503s.jpg

http://www.kingruler.nl/gallery/albums/album156/IMG_5506s.jpg

A buddy messing around with the harnes

http://www.kingruler.nl/gallery/albums/album156/IMG_5510s.jpg

Looks kind of complicated and stuff

http://www.kingruler.nl/gallery/albums/album156/IMG_5512s.jpg

Meters also arrived, spakplug wires and Spoon radiatorstay.

http://www.kingruler.nl/gallery/albums/album156/IMG_5509s.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_32.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_33.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_34.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_35.jpg

The endresult so far...

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_6839.jpg


To be continued

Are you kidding me? Look how clean your car is. omfg. It looks amazing man, Get some vids up! and you are so running for ROTM again. NIce build.

Looking great! Wow thats a long word on the blue hood "Telefoonapparatuur" crazy european spelling. Why the Spoon rad stay? Arnt they like $60?

wow, im gonna have to custom made a bracket for my mishimoto radiator to fit into my eg because the radiator is shorter than the stocker.:D:D:Dvery nice thread man. props to you and your friends:D

ORIGINAL: Lost

Looking great! Wow thats a long word on the blue hood "Telefoonapparatuur" crazy european spelling. Why the Spoon rad stay? Arnt they like $60?


Hahaha, "Telefoonapparatuur" good word for playing scrabble:D It means "phone equipment".
The radiator stay is something my brother had laying around and wasn`t using it for his project anymore. And yeah you`re right, the price for it is just stupid. I bet the folks at Spoon are laughing theis ass off.:D

Thanks for all the positive reply`s btw.

dang..... thats ALOT of work done and money droped in that sucker.... should be sweet!!!!

looks great so far! i wish i had your kinda cash and friends.LOL

First of all that valve cover looks sick , i've been toying with the idea of paiting mine i just dont know what color yet. my only question is , if u take the valve cover off do you have to replace the gasket or not?

ORIGINAL: PREKGSR

First of all that valve cover looks sick , i've been toying with the idea of paiting mine i just dont know what color yet. my only question is , if u take the valve cover off do you have to replace the gasket or not?


Yup it`s better to replace it. Small cost and better for you;)

alright thanks bro , keep the pics coming

Some new pics...

Skunk2 Camseal
http://www.kingruler.nl/gallery/albums/album156/swap_37.jpg

And this is what you see of it after its installed....
http://www.kingruler.nl/gallery/albums/album156/swap_38.jpg
:D

Skunk2 solenoid cover
http://www.kingruler.nl/gallery/albums/album156/swap_39.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_40.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_41.jpg

We've started the engine and it's running really nicely. [sm=wootwoot.gif]

http://www.kingruler.nl/gallery/albums/album156/swap_42.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_43.jpg

Thanx Dennis:D

Thats a very good DIY cuz a lot of the other ones arent clear. This one is clear cut and straight forward. How did u get the bay so clean!

thats really clean nick! nice!

wow i deffinently need to start making some more money lol, this thread make me want to go out and buy every part ive ever wanted for my civic. extremly nice ride. you need to ship that thing here to the US so we can go for a drive

ORIGINAL: basbal123

wow i deffinently need to start making some more money lol, this thread make me want to go out and buy every part ive ever wanted for my civic. extremly nice ride. you need to ship that thing here to the US so we can go for a drive


Haha, that would be cool:D But uhhm... its a pretty long way from the Netherlands.

Nick

Car is looking great man. Thats one of the cleanest engine bays i have ever seen. Keep up the good work and hope to see some more pics soon.

Hey people, it`s been a long time but the project is finally finished!!
There are still a couple of things that need to be done, but nothing major.

Some pics:

http://www.kingruler.nl/gallery/albums/album156/swap_44.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_45.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_46.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_47.jpg

This airfilter is temporary untill i get the right piece to connect the carbon airbox.

http://www.kingruler.nl/gallery/albums/album156/swap_48.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_49.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_50.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_51.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_52.jpg

http://www.kingruler.nl/gallery/albums/album156/swap_53.jpg

OMFG i just creamed my pants! thats is so f*cking nice! +1 very very nice job!

[sm=jawdrop.gif], what a car ! nice job , nice to see all the pics of you guys tearing thru it, love all the details , keep up the fine work[sm=smiley20.gif]

clean, may i ask how much the swap cost u?

loving your car nick. very nice job!!!!!!!!

yeah, i am also really curious on how much this swap cost you over there? nice car!

I might just have to do that with my valve cover. Does anyone know if you can paint over chrome? lol

ORIGINAL: kick7_honduh

clean, may i ask how much the swap cost u?


The swap itself was about 2500 euros. It cost me another 1000 euros to replace all the smal stuff like gaskets, rings, seals, hoses, nuts and bolts, all oem Honda stuff.
B16`s are getting harder to find over here. But i got mine relatively cheap.

Ow, and thanks for the positive feedback guys!:D

jesus, i hate you man lol. j/k im extreamely jelious of your beautiful clean car

holy sh*t, i'm in awe right now. That things amazing, congrats, and welcome to ROTM ;)

Awesome car man...


I want to do the same thing with mine, except I wish I had the money or the experience!

Cars looking great man, keep up the good work and keep the pics comming.

Thanks guys:D

@ speed_o: I don`t have that much experience, just a couple of good friends and my brother that helped me out.
Without them it probably wouldn`t have come out like this. As for money, it took every penny i could spare for over 12 months.

@ Flip: That would be nice;)

Whats up guys! Haven't been here for a while. Thought i'd say what's up, and post up some updates.

Ditched my airbag in favor of a sparco steering wheel.
http://img.photobucket.com/albums/v94/D-Rex/Civic%20Nick/IMG_9183.jpg

Got myself a pair of new EK9 headlights.
http://www.student.vu.nl/%7Eylm300/Marktplaats/Ek9koplampen-16.jpg

http://img.photobucket.com/albums/v94/D-Rex/Civic%20Nick/IMG_9247.jpg

http://img.photobucket.com/albums/v94/D-Rex/Civic%20Nick/IMG_9249.jpg

Oem Type R shift boot.
http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_8982s.jpg

EK9 cluster.
http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_8790s.jpg

http://i151.photobucket.com/albums/s134/nvds-bucket/IMG_9022s.jpg

And i swapped my srr motormounts for a set of Hasports's. The srr's were just too hard. from 120 km/h i needed earplugs because the hard mounts resonated to much sound within the car.
Great for track/drag use, but not for road unfortunally.
http://img.photobucket.com/albums/v94/D-Rex/Civic%20Nick/IMG_9237.jpg

http://img.photobucket.com/albums/v94/D-Rex/Civic%20Nick/IMG_9243.jpg

holy crap ur alive man!! lol havnt seen you around in ages. The car is looking good as always bro

Thanx bro! Haven't had a lot of time lately. Been working much too much[sm=smiley11.gif].
But that means more funding for my ride:D

Got a set of new seats today. They're Recaro's from an evo7.
I also ordered a set of EK9 seat mounts from Japan so the seats can be installed.
I'll post some more pics when i got them in the car.

http://img.photobucket.com/albums/v94/D-Rex/Civic%20Nick/IMG_9418.jpg

stupid really dumb question for yall... but i cant find my answer ANYWHERE!!!! where would i go to figure out what kinda engine i have?

ORIGINAL: harne_kyle

stupid really dumb question for yall... but i cant find my answer ANYWHERE!!!! where would i go to figure out what kinda engine i have?


Check out the search feature next time as well as all the stickys and FAQs.
These stickys were located above
general civic talk: http://www.hondacivicforum.com/m_270258/tm.htm
and general civic help http://www.hondacivicforum.com/m_131941/tm.htm