Front Strut Bar Installation by XCM828

Printable Version

Honda Civic Forums >> General Automotive >> DIY - Do It Yourself >> Drivetrain DIYs >> Front Strut Bar Installation by XCM828

Page: [1]

Login Message << Older Topic   Newer Topic >>

Front Strut Bar Installation by XCM828 - 2/24/2005 4:25:28 PM    Amanda   Posts: -1 Joined: 3/18/2004 From: United States Status: offline Thanks to XCM828 For This Article!! A strut bar is a brace that connects the struts of the two front wheels. These struts are what your front shocks are mounted to. Connecting the two struts together results in less body roll, and a tighter suspension. Installation should take anywhere from 5 - 10 minutes, and is extremely easy to do. 1. Find your struts. They should look something like this: 2. Buy a strut bar. It should look something like this: 3. Take off the two bolts on the sides of the strut. Do the same on the other strut. 4. Fit the strut bar into the 4 screws, and hand tighten the bolts back on. 5. Make sure everything is properly aligned, and torque the bolts to your cars specifications. This is how it should look when you are finished: Post #: 1

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Honda Civic Prices

Honda Civic
Civic Si Concept

Featured Sponsors
Select A Model Accord CR-V Civic Civic Hybrid Element Fit Odyssey Pilot Ridgeline S2000

Top 10 Posters
forty04 14259 remmy 11165 fiirkan 10543 mill$civic 8473 marty 8273 mxs 8006 fliphkd720 7739 nail i3unny 7705 sacicons 7699 addiction2ba 7491

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.