Go Back   HondaCivicForum.com > Your Ride > Nitrous, Super Chargers, & Turbos




Reply
 
Thread Tools
  #1  
Old 08-10-2007, 10:06 AM
D17Punk D17Punk is offline
 
Join Date: Aug 2007
Posts: 151
Default Polished and Ported Head

Quick question. I'm rather new to this stuff, but I just wanted to know if I am running a Nitrous system ( Nitrous Express) would it be worth it to get a ported headwith new piston heads, valve springs,and cam (shaft and gear). I know D17 are bitches to mod but I wanted to get some feedback on this before I jump into anything that might be worthless. Thanks.
Reply With Quote
Sponsored Links
  #2  
Old 08-10-2007, 11:13 AM
johnny johnny is offline
 
Join Date: Oct 2006
Location:
Posts: 1,906
Default RE: Polished and Ported Head

[&:]Nitrous kit on a D17?
Reply With Quote
  #3  
Old 08-10-2007, 11:30 AM
D17Punk D17Punk is offline
 
Join Date: Aug 2007
Posts: 151
Default RE: Polished and Ported Head

Yeah it is safe to run off of stock internals I had a compression test done, butI would rather build the engine a bit without a swap, andI don't know if its worth it to put a new head on it. I know most heads are used for forced induction only so ifI dont run a turbo on it, is it worth upgrading it?
Reply With Quote
  #4  
Old 08-10-2007, 12:03 PM
johnny johnny is offline
 
Join Date: Oct 2006
Location:
Posts: 1,906
Default RE: Polished and Ported Head

Honestly, I'm sure you know this those bottom ends are weak, and aren't good for too much horsepower.
How big of a shot are you running?
Reply With Quote
  #5  
Old 08-10-2007, 12:19 PM
D17Punk D17Punk is offline
 
Join Date: Aug 2007
Posts: 151
Default RE: Polished and Ported Head

Just a 50 shot. What kind of bottom ends can I get to make it a little more sturdy. I have been told they are weak but I was too stupid to ask what mods I could do.
Reply With Quote
  #6  
Old 08-10-2007, 04:32 PM
johnny johnny is offline
 
Join Date: Oct 2006
Location:
Posts: 1,906
Default RE: Polished and Ported Head

Alright, well Im going to tell you, and i know its something you dont wanna here. The engine is probly good for like.. say 180whp. If you really wanna get the power going, get yourself a decent platform such as a D16z6 ( 92' - 95' civics) Or a D16y8 ( 96 - 00 EX civcs) Youll have a much better experiance. trust me.
Reply With Quote
  #7  
Old 08-10-2007, 06:13 PM
D17Punk D17Punk is offline
 
Join Date: Aug 2007
Posts: 151
Default RE: Polished and Ported Head

Do you think I could get a better platform for it or is that not worth it. I know that i could do swaps and different stuff like you said an older style civic but I was just looking for other options around that.I really just want to build it for like 230-250 whp and 190-210 wtq something pretty fun to drive around without a turbo but i know either route of building the motor or turbo is pricy.
Reply With Quote
  #8  
Old 08-10-2007, 06:44 PM
johnny johnny is offline
 
Join Date: Oct 2006
Location:
Posts: 1,906
Default RE: Polished and Ported Head

You could honestly pick up a 1.6 litre D series engine for like 500 or even less and put a turbo kit on it, and it would be able to handle 225 horsepower with a good tune on the stock bottom end.
don't expect to see that much torque on a honda engine. Expect to see around 140-160. Atleast you can wind them out to 7k+ though. Lol.
Reply With Quote
  #9  
Old 08-10-2007, 09:16 PM
theblackpearl theblackpearl is offline
 
Join Date: Jul 2007
Location: Colorado
Posts: 161
Default RE: Polished and Ported Head

i don't know how weak the d17 is but if you're only running 50 shots then you should be fine as long as you don't mis shift and over rev. i've been running 50 shots on my d16y7 for a long time and i still haven't had anything happen to my engine.

and i'm pretty sure 50 shots won't give you that much power even if you do build the internals
__________________

Reply With Quote
  #10  
Old 08-10-2007, 09:37 PM
Pete Pete is offline
Moderator
 
Join Date: Feb 2005
Location: Jersey
Posts: 7,178
Send a message via Yahoo to Pete
Default RE: Polished and Ported Head

The more mods youve got done the better, but the D17 is a poor platform. It can make decent power, but its just much more expensive. I wouldnt try to make it fast, unless you have $ out the arse,
__________________
1994 Civic coupe. B18C, A few Bolt Ons.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors


New Sponsors
AMSOIL - Performance Oil Technology
K&N Engineering






All times are GMT -8. The time now is 04:16 AM.

© Internet Brands, Inc.
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.