So, I'm looking to get a rear sway bar and reinforcement for my 93 civic. Does anyone have any reccomendations? I really wanted to only spend 200 bucks. But, everything I'm seeing that looks good it 300+.

What do you all think?

__________________

Build Thread: http://www.hondacivicforum.com/m_576697/tm.htm
For Sale Thread: http://www.hondacivicforum.com/m_558867/mpage_1/key_/tm.htm#559090
Bob Saget!

what is the rest of your setup?

__________________
Driving takes three abilities: Accelerating, braking, and turning. More power only helps acceleration. Lower weight helps all three.

PLEASE DON'T PM ME WITH TECH QUESTIONS, I WILL IGNORE YOU.

Front:
KYB AGX shocks (adjustable)
Skunk2 Camber kit
Skunk2 Adjustable coilovers
ES bushings everywhere
Upper strut bar
Lower H-brace
Stock sway bar

Rear:
KYB AGX shocks (adjustable)
Focuz Camber kit
Skunk2 Adjustable coilovers
Megan Trailing arm Bushings
Skunk2 LCAs w/holes for the endlinks (I don't have these yet, but I will)
ES bushings everywhere
C-pillar bar
Upper strut bar
Lower tie bar (which will be removed from the reinforcement obviously)

__________________

Build Thread: http://www.hondacivicforum.com/m_576697/tm.htm
For Sale Thread: http://www.hondacivicforum.com/m_558867/mpage_1/key_/tm.htm#559090
Bob Saget!

bump for love?

__________________

Build Thread: http://www.hondacivicforum.com/m_576697/tm.htm
For Sale Thread: http://www.hondacivicforum.com/m_558867/mpage_1/key_/tm.htm#559090
Bob Saget!

Beaks and ASR are very popular. just the Beaks reinforcement pieces is like $70-80 and the quick-swap kit is around $250. the ASR kit is about $200 and the ASR sway-bar kit is about $350.i have the Beaks SRK and havnt had any problems.

__________________

proud member of Rubber Duckie Racing -> www.rubberduckieracing.com

ASR ftw

__________________
PM me if you would like custom made vinyl stickers, magnetics, posters, or banners. ***Sign making equipment is for sale*** PM for details

Weapon of choice = Canon Digital Rebel XT; EF75-300USM; EF50 F1.8

ASR simply because it's a better design and it's contacting the chassis at more points to imporve strength as well as better dispers load.

__________________

Progress Rear Sway Bar & Tie Bar combo. Fits your budget and I am extremely happywith what it has done for my 05 EX SE.



[IMG]local://upfiles/26094/D9A5E8D7820444BC854D7EEDA992EB9B.jpg[/IMG]

__________________
2005 Civic EX SE
AEM V2
Ingalls "Stiffy" Engine Torque Dampener
CorSport Rear Upper Strut Tower Bar
NeuSpeeed Front Strut Tower Bar
Progess Rear Sway Bar and Tie Bar Combo
Tinted Windows

the 5th gen subframe are a little more ridged than the 6th gen+ subframe because the swaybar mounting holes are towards the inside of the subframe rather than on the very outside. the Beaks kit works just fine, i've put it to the test with 6 months of daily driving, about 10 races, and a novice autox schoolsince i installed it. if his were a 6th gen, then i'd lean a little more towards the ASR kit. tho i have yet to hear of any problems with the Beaks kit. best bang for buck IMO.

__________________

proud member of Rubber Duckie Racing -> www.rubberduckieracing.com

Thanks guys/gals!!! I'll let yall know what happens!!

__________________

Build Thread: http://www.hondacivicforum.com/m_576697/tm.htm
For Sale Thread: http://www.hondacivicforum.com/m_558867/mpage_1/key_/tm.htm#559090
Bob Saget!