http://media.putfile.com/605 <<<(dyno run at 23 psi, 4th gear pull, running rich)




Ok yea Im a N00b sorry in advance for those who hate to see someone first post trying to sell something. But hey Im that guy. so here it is....

My name is Steve I have a 700+ hp streetable civicthat I am parting out I want to sale the motor first so people can hear it run, drive it around, compression test, what ever you would like.The car is well known through out Oklahoma and parts of Texas

Here is the motor on ebay with no reserve.
http://cgi.ebay.com/ebaymotors/ws/eB...m=120225616617

Pm me if you see any parts you would like to buy.Here are pictures of the car and a recent parts list I have more then what is listed. Just let me know

http://www.mautofied.com/listing-100081255.htm

You might wanna follow the rules and post some pics or your thread will be locked...

http://www.hondacivicforum.com/m_244450/tm.htm

also what year is your civic? and do you have the window switches? how much shipped to 46385? t hanks

__________________
CHECK OUT www.endlesskustumz.itgo.com

missing anything else?

Got a couple of PM about the shell So here you go....

I will not sell just the bare metal shell. Mainly because I dont want to part it out that far.

Car is a 95 Hatch and has a clean title. It has never seen a night out ALWAYS GARAGE KEPT. Metalic gunmetal paint all jams, engine bay and inside of car painted ($4000.00), Black interior. Comes with S&W 10 point roll cage($1400 installed) good for 8.50 or slower, Custom OEM fromt bumper (for bigg intercoolers), Custom gauge holder, Custom door panel inserts, Full Race sump tank. Brand new front windshild installed. Front and back GSR brakes $3800 without seats $4600 with seats, slider and 5 point 3 inch harness.

I would consider selling it for 3700 without sump tank and gauge holderas i have buyers for these part already

I would considerdoing another basic motorswapin the car for $300. Meaning b or dseries. No H or K series motors.Youwouldhave to havea COMPLETE swap.

501-307-3564 (steve) Call for more info.

oh it comes with painted side skirts, shaved body line, and some ricey ebay mirrors (hey it save me almost 15 pounds)

morepictures and parts for sale

You guys have seen the car. This is my 700+ hp hatch. Lot of good parts, I still got most of it just PM me if you see something in the picture you want.
More pictures to come later

Longblock NO turbo, Manifold etc. $4750 REDUCED $1000 NOW $3750









Car is a 95 Hatch and has a clean title. Metalic gunmetal paint all jams, engine bay and inside of car painted ($4000.00), Black interior. Comes with S&W 10 point roll cage($1400 installed) good for 8.50 or slower, Custom OEM fromt bumper (for bigg intercoolers), Custom gauge holder, Custom door panel inserts, Full Race sump tank. Brand new front windshild installed. Front and back GSR brakes $3800 without seats $4600 with seats, slider and 5 point 3 inch harness

AEM EMS 10-10 V1.11 and V1.19 countless tunes by St00pid, D series, B series, Race, street. also comes with a 500+ page hard copy manuel $1100
This thing is sweet and AEM keeps adding more useful feature makeing it better and better.

would like to sale all 4 wheels with rubber together $1900 SOLD
SX Fuel pressure regulator comes with u clamp, retun and supply fitting, -8 an line (about 20 inches), and -10 an plug $150

Omni Power Drag Coilovers (8k front 18k rear) $760

JG Edelbrock intake manifold $300

Competition Clutch Twin Disc Stage 6. Only 3 passes and about 20 miles of street use $1150

More parts for sale


Autometer UltraLite Boost Gauge #4303 (30 psi) $45 (comes with wireing, light, and plasic tubing)



Autometer UltraLite Boost Gauge #4305 (60 psi) $45 (comes with wireing, light, and plasic tubing)



Autometer UltraLite Fuel pressure #4363 $150 (comes with wireing, light, and sensors)



Autometer UltraLite A/F Ratio #4975 $55 (comes with wireing and plasic tubing)

More parts for sale


Autometer UltraLite Boost Gauge #4303 (30 psi) $45 (comes with wireing, light, and plasic tubing)



Autometer UltraLite Boost Gauge #4305 (60 psi) $45 (comes with wireing, light, and plasic tubing)



Autometer UltraLite Fuel pressure #4363 $150 (comes with wireing, light, and sensors)



Autometer UltraLite A/F Ratio #4975 $55 (comes with wireing and plasic tubing)

__________________

for sale http://www.hondacivicforum.com/forum...ad.php?t=71434

up

Heres a parts list let me know what you guys need

B20 block Golden Eagle resleeve (84mm)
B16 head P&P valve job
Je piston 9.0-1
Crower rods
ARP head studs
Prodrive oil pump gear
Toda cam gears
JDM type R cams
Crower retainers
Eibach valve springs
Ferrea Valve 0.5 over
C&R Radiator
JG manifold
STR Fuel rail
1600 cc bosch injectors
bosch fuel pump
2 SX fuel filters (one is brand new)
-8 fuel line
B16 tranny
Quiafe LSD
Competition Clutch Twin Disc Stage 6
Greddy Catch Can
Greddy Oil filter adapter
Auto meter Ultra Lite Series: fuel pressure, boost 30 psi, boost 60 psi, A/F ratio, EGT, 5 inch tach with shift light
PT67 BB turbo SOLD
One fab top mount
One fab 4 inch down pipe
Full race Sump tank
Tial 50mm BOV SOLD
Tial 44mm Waste gate SOLD
AEM EMS (with programmed setting for race and street)
S&W 10 point roll cage (installed by Morgan-Dollar Motorsport NASCAR Craftsman Truck Series #85 http://www.morgandollarmotorsports.n...000/000078.htm)
Omni Power Drag Coilovers (8k front 18k rear)
Precision Turbo Front Mount Intercooler 825-hp
2 Weld Magnum Import Drag 13x8 SOLD
2 Weld Magnum Import Drag 15x4 SOLD
2 M&H drag slicks 8.7 x 25 x 13 (Compound Type: HB-11) SOLD
2 M&H front runners 3.5 x 22 x 15 SOLD
4 16 inch Black Rota circuit 10 with Neo Gens 85% tread left SOLD
VIS Carbon fiber hood