Alright, so if you don't already know, I wrecked my 99' ex a few months ago. The good part about it was that the engine and tranny were ok. Anyways, I was on my way to get it tuned. EVERYTHING, was completely done. I've realized that I need the money more than I need a turbo kit that I won't be using. So here's the list of stuff I had on my car. I'm located in Defiance, OH.
The following prices are my asking prices... If you don't like them, make me an offer.
ARP headstuds(new, never used, D16Y8)- $100
9-11lb wastegate actuator (14b, 16G)- $40
Map sensor bypass- FREE, you pay shipping
Hallman ES Boost Controller- $60
Golden Eagle Vacuum mani, fittings, and lines- $20
Oil/Boost gauges(Autometer) and OBX gauge bezel- $75
Tenzo R upper front support bar for 1996-1999 civics. $30
18" Focal's w/General ExclaimUHP summer tires-$600 (Local Pickup Only) comes with one new tire and three used(mounted), and a brand new spair.
All the parts above are buy at your own risk, i did have everything installed and everything worked fine. If you would like to see more pictures or you want more info ask me and I will gladly take care of it.
I don't know the difference, but I can find a greddy turbo kit for $2000 new on ebay, the real deal.
Littlehag
03-01-2008, 03:08 PM
The engine management system that greddy offers is junk. That plays a huge role. A greddy kit also doesn't come with ARP headstuds and a new gasket. I'm almost positive that it doesn't come with a wideband either. Not 100% on that, but that is a neccessity when tuning with the s300. This kit is also very flexible as well, it will work at basically any psi the turbo and your engine can handle.
If you are familiar with the parts you will know that this is a good deal. Not only a good deal, but very convient having all the hardware neccessary to do the installation. I think the only thing you will need to do is take your oil pan off and have an oil bung welded in like the picture shows... And remove the a/c and washer fluid bottle. Plus I did the entire installation myself so if any problems arrise, a quick phone call can fix you right up.
I have a 1998 non-vtech civic is this a complete kit that will fit on my car if so I am really intreested
Littlehag
03-02-2008, 11:37 AM
PM'd
Littlehag
03-03-2008, 09:26 PM
bump
BillyB98
03-04-2008, 08:17 AM
$2000 seems a little steep.
Littlehag
03-04-2008, 11:29 AM
ORIGINAL: BillyB98
$2000 seems a little steep.
Did you add up my costs? Not to mention it was installed and never even used. With the exception of a few things.
Make me an offer.
dave_57204
03-05-2008, 02:20 PM
I'll take the HF mani off your hands if your willing to part out... Also the charge pipeing section with the BOV mabye more, Let me know if you change your mind and want to part out.
Littlehag
03-06-2008, 09:05 PM
I'd rather not part out yet, I'd like to see if I can sell it as a whole kit. A lot less hassle that way.
New Price, very reasonable. Somebody buy this.
s0ulj3r
03-06-2008, 09:15 PM
Ill buy the HF mani; w/ turbo attached -- NO DP w/ the oil lines + RC's-- LMK!!!
Littlehag
03-08-2008, 01:24 PM
New pics and prices, PARTING OUT!
ecstacy
03-09-2008, 06:21 PM
hey im interested in the whole kit all together,do u still have it. i have a 94 ex though.will it wk together let me know and well talk
Littlehag
03-10-2008, 12:32 PM
sorry man, already started to part out. If there's anything you want to buy by itself let me know and I'll see if I still have it.
and_so_we_went
03-10-2008, 10:23 PM
do you still have the cluster? im interested for my si 99, think it will fit?
Littlehag
03-11-2008, 12:10 PM
Yes, I still have it, Do you want the gauges as well? It will fit.
Littlehag
03-16-2008, 09:40 PM
Still parting, see what all is left! Make me offers!
FlipHKD720
03-16-2008, 10:27 PM
negotiate about wideband price?
Littlehag
03-16-2008, 11:36 PM
ORIGINAL: FlipHKD720
negotiate about wideband price?
PM'd
Billy Korgain
03-17-2008, 03:04 PM
how much for boost gauge, oil pressure gauge and house that fits inn dash? PM me please i have money ready
LarsonSi_0091
03-17-2008, 04:56 PM
Does the hondata come with everything that you get when you buy it? LMK im intrested.
Littlehag
03-18-2008, 01:27 PM
Check your messages...
Littlehag
03-21-2008, 02:19 PM
Updated, Bump.
Littlehag
03-23-2008, 04:10 PM
NEW PRICES!!!
WhiteRabbit1021
03-23-2008, 05:26 PM
http://www.hondacivicforum.com/micons/m6.gif
GOOD SELLER.
Good prices, good contact, fast shipping.
FlipHKD720
03-25-2008, 11:04 AM
PMed about the payment plan
Littlehag
03-30-2008, 08:58 PM
bump
Littlehag
04-04-2008, 02:44 PM
bump again... I'd like to get rid of this stuff. I'm tired of it taking up room in my basement. Make me some offers if you see something you like.
bcrichguitars
04-04-2008, 03:15 PM
Will you accept paypal and can you ship to Canada?
I'm interested in the Air Filter and intake(to turbo). Does the intake that goes to the turbo have a 2.25" diameter? It will fit my 16g EVO III?
My next question is for the Map sensor bypass, this makes it so you can run over 10psi correct? Will this work on a JDM D15B engine chipped uberdata p28ecu?
Also I used to have a greddy profec b electronic boost controller, i still have the vacuum lines from my profec b that are right behind the center console. I would probably get this installed proffesionally, with manual boost controllers do you do the adjusting under the hood or is it in the car?
I'm 99% positive that OBX gauge bezel doesn't work with my 95 civic right?
Get back to me I will buy multiple items! Thanks
Littlehag
04-14-2008, 08:33 PM
Check out the updated list of parts/prices. I've almost ridded myselfof everything! Buy it up, make me offers.
Littlehag
04-22-2008, 04:53 PM
bump
Littlehag
05-11-2008, 10:30 AM
bump
Ej1Rider
05-11-2008, 11:43 AM
still hve the head studs?
Littlehag
05-11-2008, 03:25 PM
Sure do. Pm me to work out details.
Littlehag
05-20-2008, 07:48 PM
bump
Littlehag
05-26-2008, 07:34 PM
Updated Items list. Lowballs are welcome, I need to get rid of this stuff.
bcrichguitars
05-27-2008, 05:43 PM
Still have ARP's? I have money ready on my paypal...
bcrichguitars
06-14-2008, 09:34 PM
Littlehag check PM. Recieved the headstuds (item number 208-4305 for D16Y), you said that these would work with the D16Z. However I found out today that the heads are different, and the item number for the studs for D16Z is 208-4301. Will you accept the refund if I send it back?
Littlehag
07-02-2008, 06:59 PM
Updated list... Really want to get rid of this stuff, make me some offers.
Billy Korgain
07-03-2008, 09:43 AM
Iwant the boost/oil gauge and OBX dash gauge holder. 100$ shipped sound ok? Let me know bud. Thanks
pbmlewis
07-08-2008, 06:23 PM
billy ripped me off dont do any kind of business with him... con
Littlehag
07-21-2008, 08:19 PM
bump
bcrichguitars
07-22-2008, 02:35 PM
Hey, i'minterested in the wastegate actuator. Can I get a pic and how difficult is the install? Will I need to remove my turbo or can it be done under the car?
reaper2022
07-22-2008, 03:23 PM
Stupid question... do you still have the car itself? I need to find me a manual transmission lol :D
Littlehag
07-22-2008, 05:24 PM
I do still have the wastegate actuator, i'll try to put a picture on here asap. Yes, you can put it on under the car, pretty easy install, just two bolts.
and as for the car.. lol no, I don't have it anymore.
Littlehag
07-22-2008, 05:33 PM
Here are the pics, as requested. If there is anything else that I can do, let me know.