Stock Pressure Plate Spec.

Honda Civic Forum Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Honda Civic News Forum FAQ Timeslips Civic History Recalls TSBs Register Login

Stock Pressure Plate Spec.

Printable Version

Honda Civic Forums >> Your Ride >> Transmission & Differential >> Stock Pressure Plate Spec.

Page: [1]

Message

<< Older Topic Newer Topic >>

Stock Pressure Plate Spec. - 3/24/2008 6:53:57 PM

sway2003

Posts: 199
Joined: 7/6/2005
Status: offline

I am wondering if anybody knows what the clamping power of a stock pressure plate on a 94 integra is? I'm just curious what the FT-LBS pressure is rated at.

_____________________________

-B-

Post #: 1

RE: Stock Pressure Plate Spec. - 4/7/2008 6:09:06 AM

cohen_fetters

Posts: 22
Joined: 10/23/2007
Status: offline

im not sure about the teg but on my 95 civic it 19ft/lbs

(in reply to sway2003)

Post #: 2

RE: Stock Pressure Plate Spec. - 4/7/2008 8:46:29 AM

addiction2bass

Posts: 7489
Joined: 6/21/2006
Status: offline

well IMO if ya think your stocker is old and ya have the trany pulled then replace it all...
thats what i was told when i asked about my clutch that was on my motor when i pulled it. it looked good BUT like everyone else said... its cheap insurance. a complete clutch kit for my civics Z6 motor was only like 100bucks shiped off ebay, pressure plate, clutch, pilot bearing and throwout bearing, along with the alignment tool.
so only thing i reused was the flywheel after a quick sand to ensure it was smooth.

well worth the insurance knowing its good so you wont have to pull the tranny back out!

_____________________________