Go Back   HondaCivicForum.com > Misc. > Motorsports/Racing > Street n Strip




Reply
 
Thread Tools
  #1  
Old 08-06-2005, 12:07 AM
fast93civic fast93civic is offline
HCF Member
 
Join Date: Oct 2004
Location:
Posts: 1,518
Send a message via AIM to fast93civic Send a message via Yahoo to fast93civic
Default Just curious about 1/4 times?

Im just curious what would the quarter mile time be for a 93 civic ex AUTO with the following mods. I know it's kinda hard to tell, but in a approximate ball park.

Apex turbo with intercooler, 6.5 PSI
VAFC, DSM 450CC injectors, Walbro fuel pump, and AEM fuel rail
68mm TB, Skunk2 IM, and Tsudo cat back with a decatpipe.

__________________
Apexi AX53 turbo, intercooled-stock PSI
Vortech FMU
Tsudo exhuast
MSD Super Conductor wires
Holley 68mm TB
Skunk2 Manifold
Walbro-255
AEM fuel rail, FPR
Dropzone coil/struts
Sumitomo HTRZII's on 16s

Reply With Quote
Sponsored Links
  #2  
Old 08-06-2005, 12:10 AM
LEVIII LEVIII is offline
 
Join Date: Apr 2005
Location:
Posts: 2,501
Default RE: Just curious about 1/4 times?

I would have to guess low 15s to high 14s
__________________
Buy your parts from........Speed6motorsports.com

pick 2: reliable, cheap, fast
Reply With Quote
  #3  
Old 08-06-2005, 12:13 AM
sacicons sacicons is offline
Senior Member
 
Join Date: Jun 2004
Location:
Posts: 7,719
Send a message via AIM to sacicons
Default RE: Just curious about 1/4 times?

yeah. and those injectors are WAY overkill. try to get some 270s or 310s. thats plenty for low boost. much bigger and it will just run really rich.
__________________
Yes, there's a "Replacement for Displacement". Its called Volumetric Efficiency.


Quote:
ORIGINAL: Forty04

I choose the rear ending
Reply With Quote
  #4  
Old 08-06-2005, 12:18 AM
LEVIII LEVIII is offline
 
Join Date: Apr 2005
Location:
Posts: 2,501
Default RE: Just curious about 1/4 times?

And your MPG will go down the tubes










I dont really know what tubes I speak of but trust me, it will go down the tubes
__________________
Buy your parts from........Speed6motorsports.com

pick 2: reliable, cheap, fast
Reply With Quote
  #5  
Old 08-06-2005, 12:44 AM
fast93civic fast93civic is offline
HCF Member
 
Join Date: Oct 2004
Location:
Posts: 1,518
Send a message via AIM to fast93civic Send a message via Yahoo to fast93civic
Default RE: Just curious about 1/4 times?

Ok. As far as the injectors go, its like every where I look when it comes to turboed D series, every one has 440's or 450's. How would I be sure to get enough fuel through the 270's? Would they be able to put enough fuel at 8 PSI?
__________________
Apexi AX53 turbo, intercooled-stock PSI
Vortech FMU
Tsudo exhuast
MSD Super Conductor wires
Holley 68mm TB
Skunk2 Manifold
Walbro-255
AEM fuel rail, FPR
Dropzone coil/struts
Sumitomo HTRZII's on 16s

Reply With Quote
  #6  
Old 08-06-2005, 01:07 AM
sacicons sacicons is offline
Senior Member
 
Join Date: Jun 2004
Location:
Posts: 7,719
Send a message via AIM to sacicons
Default RE: Just curious about 1/4 times?

yeah. in all honesty, the stockers would be fine for about 8psi, but you would be on the limit. the 270s would be plenty. i did all the math a long time ago on my gsr for like 6-7 psi, and i decided that 270-280 would be more than enough. so on a sohc, youll be golden with 270-310s even at 8 psi. esp with race fuel.
__________________
Yes, there's a "Replacement for Displacement". Its called Volumetric Efficiency.


Quote:
ORIGINAL: Forty04

I choose the rear ending
Reply With Quote
  #7  
Old 08-06-2005, 11:10 AM
fast93civic fast93civic is offline
HCF Member
 
Join Date: Oct 2004
Location:
Posts: 1,518
Send a message via AIM to fast93civic Send a message via Yahoo to fast93civic
Default RE: Just curious about 1/4 times?

when you say race fuel you mean 91 right?
__________________
Apexi AX53 turbo, intercooled-stock PSI
Vortech FMU
Tsudo exhuast
MSD Super Conductor wires
Holley 68mm TB
Skunk2 Manifold
Walbro-255
AEM fuel rail, FPR
Dropzone coil/struts
Sumitomo HTRZII's on 16s

Reply With Quote
  #8  
Old 08-06-2005, 11:25 AM
sacicons sacicons is offline
Senior Member
 
Join Date: Jun 2004
Location:
Posts: 7,719
Send a message via AIM to sacicons
Default RE: Just curious about 1/4 times?

no. i mean 96 minimum. anything 93 or under is considered "pump gas" but even with premium pump gas, 310s will be fine at 8 psi. and i would be pretty confident with 270s.
__________________
Yes, there's a "Replacement for Displacement". Its called Volumetric Efficiency.


Quote:
ORIGINAL: Forty04

I choose the rear ending
Reply With Quote
  #9  
Old 08-06-2005, 01:11 PM
polo708 polo708 is offline
 
Join Date: Apr 2004
Location: Arizona
Posts: 2,157
Send a message via AIM to polo708
Default RE: Just curious about 1/4 times?

I'd guess low 15's... it's really hard to guess-timate a turbo setup, too many variables.
__________________
-brian
Reply With Quote
  #10  
Old 08-06-2005, 01:26 PM
fast93civic fast93civic is offline
HCF Member
 
Join Date: Oct 2004
Location:
Posts: 1,518
Send a message via AIM to fast93civic Send a message via Yahoo to fast93civic
Default RE: Just curious about 1/4 times?

yea i know
__________________
Apexi AX53 turbo, intercooled-stock PSI
Vortech FMU
Tsudo exhuast
MSD Super Conductor wires
Holley 68mm TB
Skunk2 Manifold
Walbro-255
AEM fuel rail, FPR
Dropzone coil/struts
Sumitomo HTRZII's on 16s

Reply With Quote
Reply
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors


New Sponsors
AMSOIL - Performance Oil Technology
K&N Engineering






All times are GMT -8. The time now is 05:03 PM.

© Internet Brands, Inc.
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.