OBD1-2A problem
Thread Starter
|
Junior Member
Joined: Aug 2007
Posts: 16
OBD1-2A problem
Hi
Had my tuner put in the power FC, with the 1-2A harness I got. Won't start, throws a CEL, tuner says it's because of a voltage difference on return wire from the dizzy, OBD1 is 5v and OBD2 runs 12v (or vice versa, I've forgot). Ideas on how do I fix this? Swap internals from an OBD2 dizzy into mine if that possible? Get a 2 dizzy and re-qire from plugs?
cheers
Dan.
Had my tuner put in the power FC, with the 1-2A harness I got. Won't start, throws a CEL, tuner says it's because of a voltage difference on return wire from the dizzy, OBD1 is 5v and OBD2 runs 12v (or vice versa, I've forgot). Ideas on how do I fix this? Swap internals from an OBD2 dizzy into mine if that possible? Get a 2 dizzy and re-qire from plugs?
cheers
Dan.
Thread
Thread Starter
Forum
Replies
Last Post
PaTKRider
Mechanical Problems & Technical Chat
7
Sep 18, 2009 02:55 PM
Captain_Sl0w
ECU Tuning & Fuel Management
0
Aug 19, 2008 06:41 PM
nightrider46
Mechanical Problems & Technical Chat
16
May 23, 2007 08:15 PM