zc swap into a 88 4 door dx

Reply Subscribe

Thread Tools

Search this Thread

Dec 19, 2005 | 02:20 PM

yorky

Thread Starter

Joined: Dec 2005

Posts: 56

From:

zc swap into a 88 4 door dx

hey, iwas wondering if anyone had any suggestions on a zc swap into my 4 door civic? like parts needed and wiring?

Dec 20, 2005 | 04:47 PM

finalimpact

HCF Member

Joined: Mar 2005

Posts: 1,801

From: NC

RE: zc swap into a 88 4 door dx

dohc or sohc zc? most likely your going after the dohc version so in that case. you must convert to mpfi as your dpfi manifold wont bolt up to the dohc zc head.

Dec 21, 2005 | 12:55 AM

Kappa22

Senior Member

Joined: Dec 2004

Posts: 3,095

From:

RE: zc swap into a 88 4 door dx

DOHC ZC, any 4G tranny, 88-89 Integra 5-spd ECU (PG7), injector resistor box from any MPFI Civic/Integra, old ECU plugs to pull pins from, surplus wire and looming.

Dec 22, 2005 | 03:59 PM

ef4life

Senior Member

Joined: Nov 2005

Posts: 2,667

From:

RE: zc swap into a 88 4 door dx

for a tranny you must use the flywheel and clutch that is for that transmission. a si trans, si clutch, si flywheel. some years and models came with different sizes, and won't be compatible.