confused?????
Thread Starter
|
Junior Member
Joined: Jun 2008
Posts: 5
confused?????
Hello everyone,
I recently tore down my supposed jdm type r motor and was confused by a few part numbers. The first thing i did was take the head off everything was fine their (p-73 00).
Then I proceeded to take off the oil pan and the first thing I saw was p-72 on the rod bearing caps, so i started to get pissed. I decided to tear out the whole rotating assembly. The crank is type r ,and the piston rods say "r" and "P-72" on them. Then I noticed the oil squiters(im not sure if that non spec r b-18cs have them to). Finally i was looking around the block and noticed p72 stamped on that to. The block number is
b-18c
2202188
If it means anything the head is type r to. I was just wandering what is going on here ?
Thanks ahead of time,Matt
I recently tore down my supposed jdm type r motor and was confused by a few part numbers. The first thing i did was take the head off everything was fine their (p-73 00).
Then I proceeded to take off the oil pan and the first thing I saw was p-72 on the rod bearing caps, so i started to get pissed. I decided to tear out the whole rotating assembly. The crank is type r ,and the piston rods say "r" and "P-72" on them. Then I noticed the oil squiters(im not sure if that non spec r b-18cs have them to). Finally i was looking around the block and noticed p72 stamped on that to. The block number is
b-18c
2202188
If it means anything the head is type r to. I was just wandering what is going on here ?
Thanks ahead of time,Matt
Thread
Thread Starter
Forum
Replies
Last Post
evidentloss
Engine & Internal
5
Oct 11, 2008 05:50 AM
civicraider
Mechanical Problems & Technical Chat
10
Aug 6, 2005 10:36 AM