I am looking for a good discussion on strokers
 

Hey All,

Please forgive me I am brand new but I did do a search and didnt find anything I was searching for. What I am looking for is a discussion on the B16 and B18 stroker kits and combinations. I am looking at doing some work on my civic, i have 2 MR2s and have worked on the extensively I am now looking to broaden my horizons. What I want to discuss is the best stroker, block and head cobination. When I build motors for my MR2s things I consider are:

as close to a square bore ratio as possible

rod ratio

head flow

these are the three most important things, to me, when designing and building performance engines.

i notice with the b16 stroker that you can keep a close square bore ration but your rod ratio suffers. i do beleive the head flows a little better than the b18 (please correct me if i am wrong here). the b18 stroker has a better rod ratio but you lose your square bore.

what are you guys runnig? are there other combinations that i am missing? thank you.

v/r,
steven