just bought a d16y8 bare block :)
got a y8 bare block with girdle, oil pump, and timing sensor
with 60k on it and for $175 its almost time to replace my turbo build post with a motor build post. fun stuff |
RE: just bought a d16y8 bare block :)
what kinda internals you plannin on running in it?
|
RE: just bought a d16y8 bare block :)
75.5mm vitaras, eagle rods, ported oil pump, havent decided if im gonna run performance or oem bearings yet...
MAYBE::: ill sleeve it just for kicks, because i know a machinest who may take over this motor and make it a beast... but i dont know yet, sleeving would be worthless for the power im gonna push to it but who knows, if its sleeved i might runa 75 shotto it and really give err hell, that would be to much fun lol |
RE: just bought a d16y8 bare block :)
Damn with all due respect you got ripped off.
|
RE: just bought a d16y8 bare block :)
well, i got the highest bid, and were making arrangemetns still so its not FINAL... but idk
keep an eye out for me or give me a link if you find anything cheaper, i havent came across crap |
RE: just bought a d16y8 bare block :)
I jus got a complete low milage(under 3000 miles, just rebuilt, pistons cracked at the ring land under un-tuned boost) B18b long block for $200.
|
RE: just bought a d16y8 bare block :)
gahhh, i hate you
honestly i have the worst luck findign sweet deals sov got his long block z6 for 50 bucks, if i could just get lucky and find something sweet like that! |
RE: just bought a d16y8 bare block :)
where you located?
|
RE: just bought a d16y8 bare block :)
Minnesota, where the muscle cars out number the tuners 2-1... go to the cities and cruise and its all gto's, cobras, a couple supras, and stuff like that..
i did find a b18c1 for a grand on craigslist, which i almost shat, but i want to run a dseries, more pride in a d16 ;) |
RE: just bought a d16y8 bare block :)
when I get back to TN man holla at me before you buy anything like a block or anything. hell I can get K24's for like $600 for a long block.
|
RE: just bought a d16y8 bare block :)
you think you could find me a d16y8 longblock for like under $200 shipped? a long block would be better so i can get the head ported.
i dont care about mileage EVERYTHING is beign replaced. i would totally appreciate it if you could do this for me.. my y8 right now is sending off a puff of blue smoke when i redline shift, burning oil is not good sign before a turbo lol [&:]and im not gonna waste my time rerring hte engine |
RE: just bought a d16y8 bare block :)
I can look around but I am pretty sure I can atleast get you a short block. Maybe a z6 block or a Y7 block but both will do just as good.
|
RE: just bought a d16y8 bare block :)
I got a B16 block for $50
|
RE: just bought a d16y8 bare block :)
ORIGINAL: Marty when I get back to TN man holla at me before you buy anything like a block or anything. hell I can get K24's for like $600 for a long block. |
RE: just bought a d16y8 bare block :)
i know of a b18c1 w/ tranny for 1k, go to craigslist MN stpaul / minneapolis and search gsr motor
will a y8 head fit on top of a z6 block? cuz my buddies headstuds wouldnt fit his y8 block to his z6 head [:@] and if i did a y7 block with a y8 head wouldnt that be just like a mini me? and is a y7 the same everything as a y8? just not vtec upstairs? |
RE: just bought a d16y8 bare block :)
yea Y7 is the same and a Y8 head will go right on a Z6
|
RE: just bought a d16y8 bare block :)
then why does a z6 head not fit on a y8?
thats odd as hell lol... |
RE: just bought a d16y8 bare block :)
it does
|
All times are GMT -8. The time now is 11:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands