I looked in the book and I am having trouble finding were #1 wire goes on the Distribor cap on a d15b7 or any of wires.If anyone has a pic or can draw how theres is on their car.

 

Her are a couple of picks I Hooked the wires up and I need to know if they are right on the cap.I just replaced the belt and need to check if the belt is right and I am gettin oil pressure.I looked in the manual no help though.Please some one help me or can look at there car and tell me what is close to the thimg that sticks up on the cap with no wire attached.

[IMG]local://upfiles/7422/AA9469ECA4C3468B96810BC4B4735C6F.jpg[/IMG]

[IMG]local://upfiles/7422/D9844B06DCD64DA884B2D7208AC157C0.jpg[/IMG]

[IMG]local://upfiles/7422/39260133E5E449B68833FB6D70FA60CC.jpg[/IMG]

 

There should be a circle with a C on it next to the #1 cylinder connection. After that they go 1-3-4-2 clockwise (from the dizzy side).