Project HCF
... and those rims look SICK!!!
Thread Starter
|
HCF Member
Joined: Jan 2005
Posts: 11,248
From: Charleston
RE: Project HCF
ORIGINAL: BurryTheSpeedo
how could you say tat about JDM stuff??? it PWNs!!!
nah, to each is to own...
how could you say tat about JDM stuff??? it PWNs!!!
nah, to each is to own...
Thread Starter
|
HCF Member
Joined: Jan 2005
Posts: 11,248
From: Charleston
RE: Project HCF
11/2 (part 2)
Good news! The block shipped today! Here is an email he sent me.
For info on Jeff, check out: www.importbuilders.com
Good news! The block shipped today! Here is an email he sent me.
I shipped it with:
b16A block, bore, honed, decked, tanked, blown out clean
Assembled, double blueprinted
All Honda bearings
Turbo rods
Wiseco pistons
Coated skirts
Crank radiused, balanced, polished
And in the box, brand new is a Type-r Oil pump
Type-R water pump
new oil pan gasket
new oil pan pickup gasket
New oil pump o-ring
So take a look at it, put your windage tray, pickup and tapped oil pan on it with the pumps, and your good to go bro.
I gave you more clearance in the piston/wall to give you added security from problems.
The crank with the pistons and rods in it spins very freely, showing you how good the blueprint came out and how well its going to make power for you.
Thank you, I appreciate your business, I am on your side to give you advice, or anything else you need to know, at anytime.
That is a quality built block.
Jeff
b16A block, bore, honed, decked, tanked, blown out clean
Assembled, double blueprinted
All Honda bearings
Turbo rods
Wiseco pistons
Coated skirts
Crank radiused, balanced, polished
And in the box, brand new is a Type-r Oil pump
Type-R water pump
new oil pan gasket
new oil pan pickup gasket
New oil pump o-ring
So take a look at it, put your windage tray, pickup and tapped oil pan on it with the pumps, and your good to go bro.
I gave you more clearance in the piston/wall to give you added security from problems.
The crank with the pistons and rods in it spins very freely, showing you how good the blueprint came out and how well its going to make power for you.
Thank you, I appreciate your business, I am on your side to give you advice, or anything else you need to know, at anytime.
That is a quality built block.
Jeff
