Turbo Install Part 1
Joined: Feb 2007
Posts: 8
From:
RE: Turbo Install Part 1
next time you change anything with coolant lines just use some pinch pliers on the ends of the hoses you might loose like three cap fulls... if you don't have those use a set of vice grips with a folded over piece of scrap aluminum or thin guage metal---- lots quicker too.
HCF Member
Joined: Jan 2005
Posts: 11,248
From: Charleston
RE: Turbo Install Part 1
ORIGINAL: Forty04
haha, At least you didnt do what I did, and heav on that main coolant line going to the front of the motor [sm=grin.gif] I even had coolant on the ceiling of my garage for cryin out loud..
Remmy, no ****ing way. I helped install that ****!
ORIGINAL: aryiman98civic
ya i learned the hard way which sucked, i had coolant dripping everywhere cause im an idiot[:@]
ya i learned the hard way which sucked, i had coolant dripping everywhere cause im an idiot[:@]
Remmy, no ****ing way. I helped install that ****!
Sorry I called first!
Thread Starter
|
formerly aryiman98civic
Joined: Jun 2005
Posts: 3,772
RE: Turbo Install Part 1
ok i finished everything up on friday night at about 330 in the morning. wake up saturday to start my car and there is no spark. i have to go back now and check all the fuses and ground wires. here is a vid of my trying to start up the car. the battery was dead so i jumped it with my 91 hatch so thats why it might sound a little weak.
http://www.youtube.com/watch?v=8wxSDR9ZzXo
http://www.youtube.com/watch?v=8wxSDR9ZzXo
