i need help with an intake manifold
#4
well, for an aftermarket intake mani, you would need a new mani gasket, some new vacuum line, new mani (of course), and time to swap all your sensors over. new throttle body gasket too. the bolts on a b series intake mani are a real headache to get to if the motor is still in the car. maybe a single cam is easier to reach. did i miss anything?
#5
Do you want to replace just the intake or the manifold...? From what i'm thinking you just want to change the INTAKE and since our new to honda ,Your not sure what your talking about...????????
#6
It sounds like he already has an intake and wants to change out the manifold.
In that case, you need the following:
Replacement intake manifold. (Lol)
Everything on your current set-up should work just fine. It is not the easiest thing to do since it involves the fuel system (swapping rail to new IM), and the coolant system being drained as the IM has a port (z6 and y8 motors I am speaking of at least) for coolant, but by no means, it is no where the hardest thing to do.
In that case, you need the following:
Replacement intake manifold. (Lol)
Everything on your current set-up should work just fine. It is not the easiest thing to do since it involves the fuel system (swapping rail to new IM), and the coolant system being drained as the IM has a port (z6 and y8 motors I am speaking of at least) for coolant, but by no means, it is no where the hardest thing to do.
#7
yeah i already have a intake, but damn thats a **** load of work :S
and im investing my money into a new exhaust system.
i only have enough money to get a good axleback. and im gonna buy some piping from a local muffler shop.
what would yall suggest for a good deep tone?
and im investing my money into a new exhaust system.
i only have enough money to get a good axleback. and im gonna buy some piping from a local muffler shop.
what would yall suggest for a good deep tone?
Thread
Thread Starter
Forum
Replies
Last Post
IronBuddha
Header, Intake, & Exhaust
3
10-23-2010 07:38 AM
twistedone_85
Header, Intake, & Exhaust
0
09-29-2008 06:29 PM
**HondaHatch**
Engine & Internal
0
02-16-2008 05:25 PM
strtballer98
Header, Intake, & Exhaust
9
05-20-2007 08:39 PM
scamil87
Header, Intake, & Exhaust
4
11-15-2005 08:36 PM