I put some neuspeed springs on my 97 civic a month ago..and then I finally paid off my 17 enkei DM5..and put them on friday..but when I go down the road now it sometimes hits the fender . What type of springs could I use to prevent this. But still have it look good with not much gap.




97 Civic Dx..




Now needs b16a motor swap.tsunami body kit.paint job..

 

b16 is gonna weigh down the front even more and it will hit worse. best thing to do would be to get some 16s or some stiffer springs and shocks.

 

Get a camber kit if you haven't already. This will prevent wear on the tires. It is good for cornering to have some negative camber, more on the rear since it is a FWD car and more braking comes from the front and the back swings out more. But most likely you don't hit corners going fast every day. Also, the negative camber could contribute a lot to the tires hitting the wheel wells.