So I'm looking at the B16A1 swap for my 89 Civic....just wanna get a little feedback from you guys on the pricing and that of the engine..

http://www.jspecauto.com/catalog_pro...px?prod_id=720


looking at getting the enigne from there...complete swap...I can get it to my door for about 2400 bucks..oh and that was me adding in tax? dont know if im supposed to do that..

Thanks

 

im doing the same swap on my 90 civic hatch. I bought a whole 90 integra with a b18a1 for 900 bucks but the motor needed rod bearing. I bought a engine rebuild kit for about 370 on perfectengine.com and 100 bucks for a oil pump on ebay. So far the engine rebuilt has gone good i should be putting in the motor this wednesday so i'll be able to tell you if it is easy or not. I think you should be able to find that motor a little cheaper probably where you live cause almost all the integras had one. Ohh and that picture of the motor that you have from that site looks nothing like the engine you need to get. that looks like an obd1 or obd2 motor and if it is it will need some extra work. So be sure and check that out.

 

eh I would just find a teggy or lude around you and just grab up an engine from that. would be smarter.

 

yeah thats what i said i just bought a blown one cuase i wanted to rebuild it with low compression pistions rods rings anyways.

 

to start off....thanks for the replys....

As well with teggy's, and lude's what year(s) engine would,foresay..."drop in"

 

acura integra 90-93 ls/gs/rs have to have cable tranny to drop in.

 

Acura Integra 90-93 gs/ls/rs/gsr b16 90-93 with cable tranny. and d16a6 from 1984-1989 with cable tranny

 

Is the 90-93 tegra b16 an OBD0 engine? just trying to plan well ahead of what is needed.

 

I don't think the 90-93 integra came with b16 but they do have a b18a1 which is obd0

 

.