D16 Turbo Engine Upgrades???
HCF Member
Joined: Feb 2005
Posts: 7,168
From: Jersey
RE: D16 Turbo Engine Upgrades???
Well its not about boost numbers. If you can make your motor resemble a d16Z6 u can get it Dynod at 200 whp. It doesnt matter if thats 5 or 10PSI, Once u go over 10PSI u need ARP headstuds as the D series head lifts under boost (arp studs stop this for 100$)
as soon as i swap in the 5 speed i am getting a 200 whp dyno tune.
as soon as i swap in the 5 speed i am getting a 200 whp dyno tune.
Recognized HCF Member
Joined: Jan 2005
Posts: 6,629
From: Loveland CO
RE: D16 Turbo Engine Upgrades???
ORIGINAL: pcupo12
Well its not about boost numbers. If you can make your motor resemble a d16Z6 u can get it Dynod at 200 whp. It doesnt matter if thats 5 or 10PSI, Once u go over 10PSI u need ARP headstuds as the D series head lifts under boost (arp studs stop this for 100$)
as soon as i swap in the 5 speed i am getting a 200 whp dyno tune.
Well its not about boost numbers. If you can make your motor resemble a d16Z6 u can get it Dynod at 200 whp. It doesnt matter if thats 5 or 10PSI, Once u go over 10PSI u need ARP headstuds as the D series head lifts under boost (arp studs stop this for 100$)
as soon as i swap in the 5 speed i am getting a 200 whp dyno tune.
its like cheap insurence
Thread Starter
|
HCF Member
Joined: Jun 2005
Posts: 832
From:
RE: D16 Turbo Engine Upgrades???
I thought you could "DIY" intstall a checkvalve before the MAP sensor to trick it so it doesn't mailfunction anyway?
Any idea on where to start looking...besides eBay?
till wouldnt be a bad idea to just get the headstuds while you are putting everything on....
Recognized HCF Member
Joined: Jan 2005
Posts: 6,629
From: Loveland CO
RE: D16 Turbo Engine Upgrades???
yeah they are like anywere from 90-120 depending on where you look..
coximports.com
jegs.com
etc
if you have to just go to google and type in arp head studs and you should find some places that carry them...
coximports.com
jegs.com
etc
if you have to just go to google and type in arp head studs and you should find some places that carry them...
Thread Starter
|
HCF Member
Joined: Jun 2005
Posts: 832
From:
RE: D16 Turbo Engine Upgrades???
Alright. Getting the headstuds right now, and I'm looking into a new turbo manifold after reading more into the SSAUTO stuff. Now what about turbo timers? I can't find one for a Honda anywhere...Will the universal one fit? Sorry for the hassle!
Thread Starter
|
HCF Member
Joined: Jun 2005
Posts: 832
From:
RE: D16 Turbo Engine Upgrades???
Sorry...Stupid question!!![sm=headbang.gif] My mind's just swimming right now...I've got 9 different windows open researching/pricing turbo timers, boost controllers, headstuds, a ?turbo header?, etc. Realized yesterday, it'll be a while til I get CLOSE to putting it in!!!
