I don't know where fuel injection goes but since it's going on the Super D I'm putting it in here and I dare a Mod to move it.

Anyway, can my ECU run Peak and Hold injectors? I kow my car has 240cc, saturated, high impedance injectors and while looking for the specs on Prelude injectors, I found that...
1992-'96 Prelude Non-VTEC Peak and Hold 240cc
1992-'96 Prelude VTEC Peak and Hold 345cc
1997-up Prelude VTEC H22 Saturated 280cc

So it looks like I want the 92-96 Prelude VTEC ones but I don't know abou the peak and hold part.

I think I read somewhere that all Hondas after 92 are high impedance so I shouldn't need a resistor box for any of these, right?

Who be knowin?

 

I don't think peak and hold will work. But again, Im not sure if there's any thing you could do about that.

 

No you need saturated injectors and a rising rate fpr,this is why DSM's work so well