WTB: LS or B20 block - and b16/gsr head
Thread Starter
|
HCF Member
Joined: Nov 2006
Posts: 397
From:
WTB: LS or B20 block - and b16/gsr head
Im going to build an LS/B20 vtec so im looking for a B18a1 or B20b block to start things off. Let me know what you have and your price. Pics would be good too.
EDIT: i also need a b16 or gsr head. Let me know what you have. Im in missouri btw.
EDIT: i also need a b16 or gsr head. Let me know what you have. Im in missouri btw.
Joined: Feb 2007
Posts: 71
RE: WTB: LS or B20 block - and b16/gsr head
i got a b18a1 block for sale. would like $150 for it. send me your email and i will get you pics. also i got a b16a for sale if you might be interested in that asking $900 obo. its been rebuilt less than 5000 miles ago
Thread Starter
|
HCF Member
Joined: Nov 2006
Posts: 397
From:
RE: WTB: LS or B20 block - and b16/gsr head
Send those pics to baber0015@hotmail.com. Where are you located? Might be interested in the b16 and block.
Thread Starter
|
HCF Member
Joined: Nov 2006
Posts: 397
From:
RE: WTB: LS or B20 block - and b16/gsr head
Thanks for the offers guys but please include a price and all info. Dont tell me to just offer because I will lowball. Tell me what you want out of it and we can negotiate from there. Thanks
HCF Member
Joined: Feb 2007
Posts: 107
From: Marion, Oh
RE: WTB: LS or B20 block - and b16/gsr head
I didn't have pictures, but i could go as low as 120 on it, if you want to have it delivered that would be on you, but i could do that. It had about 115k on it. No noticeable problems. It does have the internals in it, and i can ship it via ups. Get in contact with me if your interested. I wanted to get around 140-150, but it has been sitting in there for a few, and i see them going around 130-140. The block is in working condition if it were to be mated with a head. Let me know if your interested, i can crate it and ship it out. Patrick 740-361-0475
Joined: Oct 2006
Posts: 6
RE: WTB: LS or B20 block - and b16/gsr head
I have a LS b18b sleeved with gsr griddle GEN III work was done by JG engine dynamics asking 650. bored out to 84.5mm email me at alexb18c1@yahoo.com if you interested.
Block only with griddle and oil pan. NO rods, crank or pistons
Block only with griddle and oil pan. NO rods, crank or pistons
Junior Member
Joined: Jul 2008
Posts: 6
B-series
Hassports Mounts for ek $325
skunk2 intake manifold $175
ls vtec swap: $2,000
b16 head
-Ferrea valves (flat faced)
-Ferrea Dual valves springs
-Ferrea Titanium Retainers
-Ferrea Valve Seals
Ls block
-EnDyne 9:1 cr pistons
-Eagle rods
-Acl Bearings
-84mm Cast Iron sleeves
-Act 6puck clutch
-Act Prolight Flywheel
Hassports Mounts for ek $325
skunk2 intake manifold $175
ls vtec swap: $2,000
b16 head
-Ferrea valves (flat faced)
-Ferrea Dual valves springs
-Ferrea Titanium Retainers
-Ferrea Valve Seals
Ls block
-EnDyne 9:1 cr pistons
-Eagle rods
-Acl Bearings
-84mm Cast Iron sleeves
-Act 6puck clutch
-Act Prolight Flywheel