Anti-Sway bars
 

Hey i found this kit made by Eibach for my car and i was wondering if this would be a good set? are the bars too stiff/ too weak? good brand? the bars are 26mm front and 17mm rear. Thanks in advance for any input

http://sportcompactonly.com/part.aspx?c=60&p=81451

RE: Anti-Sway bars
 

eibach is a good brand. what springs do you have?

RE: Anti-Sway bars
 

stock suspension and factory sway bar in front, i do not know if i have a factory sway bar in the rear, i am going to get some stein S-Techs springs soon for my car though.

RE: Anti-Sway bars
 

okay, these will be fine for you then

RE: Anti-Sway bars
 

will be a good upgrade. cant really go wrong with Eibach..

RE: Anti-Sway bars
 

Jesus 26mm... just to let you know you can get ITR sway bars off of PasswordJDM.com for the front and rear they are $79 forthe front and $99 for the rear... but the don't come with bushings

RE: Anti-Sway bars
 

if your car doenst have sway bars and say you buy front and rears with bushings do you have to get anything else or will they bolt right up to my cx?

RE: Anti-Sway bars
 

^ i think ours have front... but i don't know if we have rear, i was looking at my haynes manual and it only showed front ones... if i find out though i will let you know dustin, and if you find out let me know... my body roll is driving me nuts

RE: Anti-Sway bars
 

what kind of car? if it's an EG, you will need front lower control arms from an ex or lx models, and 94-01 integras...and rear lower control arms from a 94-01 integra.


only the EX and lx models came w/ front sway bar. not rear sway bars. CX and DX models came w/ none. hit me up if you guys need the lower control arms to install yuor front and rear sway bars.

RE: Anti-Sway bars
 

HARI. has anyone ever told you that you kick ass:D.... i knew the Si/Ex's had front sway bars but i didn't know for sure if the CX/DX's did... i may just let you know if i need them if i do the goahead for the sway bars(money pending[:@])

RE: Anti-Sway bars
 

my car is an EX with stock front sway....so the front will bolt up but will i have to change anything in the rear to get the rear sway to bolt up? i would like to avoid having to replace my rear LCAs

RE: Anti-Sway bars
 

u'll also need brackets and endlinks along with what HARI mentioned.

im not 100% sure but ur rear LCA's might have holes for endlinks. i have seen some 6th gens with holes in the stock LCA's but i believe not all of them have it. u can just look under the rear of ur car at the LCA's, if it has a hole kinda toward the center of the LCA u wont need to buy news ones.

RE: Anti-Sway bars
 

yeah 96-00 civic have holes already for the rear sway bar. no need to change the LCA. all you need is the sway bar, d-brackets, and endlinks.

RE: Anti-Sway bars
 

i have megan racing rear control arms so they have the hoels for sway bars in them but i was looking at the omni power front and suspension technique sway bar kit

RE: Anti-Sway bars
 

on 6th gen cars if you install a large rear sway bar you should get a subframe reinforcement kit. I have seen sway bars as small as 13mm tear out the subframe where the sway bar mounts. Some insurance companies will declare the car totaled because of it. The Si came with reinforcements from the factory. And all 6th gen have the hole in the LCA's for sway bars