Transmission & Differential All trans and diff topics can be found within.

tranny flush or drain and fill ??

Old Mar 29, 2008 | 04:57 AM
  #1  
fab4beatlefan's Avatar
Thread Starter
Joined: Mar 2008
Posts: 6
From:
Default tranny flush or drain and fill ??

Hi..ready for tranny service on 2000 at.
will a flush hurt my tranny ? Need some
expert advice !!
 
Old Mar 29, 2008 | 07:44 AM
  #2  
addiction2bass's Avatar
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
Default RE: tranny flush or drain and fill ??

DRAIN AND REFILL ONLY!!!!!!!

flushing the tranny knocks out all the gunk in the tranny and then it clogs up the internal screen filters which leads to overheating and trany death!
and thats just the metal internal screens, not including the internal filter, which can not be replaced without taking the tranny apart ALOT.....

so just drain the fluid and top it off again....
most shops will recomend a flushing.... and why wouldnt they? it does knock all dirt loose BUT at the same time it clogs up the internal screens which makes your tranny fail and guess what...... they want you to come back and so called TRUST THEM with a tranny replacement then they got your money.....
 
Old Mar 30, 2008 | 07:28 AM
  #3  
fab4beatlefan's Avatar
Thread Starter
Joined: Mar 2008
Posts: 6
From:
Default RE: tranny flush or drain and fill ??

Thanks..Im gonna take your advice !!
any brand atf i should use ??
 
Old Mar 30, 2008 | 07:39 AM
  #4  
addiction2bass's Avatar
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
Default RE: tranny flush or drain and fill ??

i use factory OEM HONDA fluid. but at any dealership.

 
Old Mar 30, 2008 | 06:50 PM
  #5  
TheJGB3's Avatar
HCF Member
Joined: Mar 2008
Posts: 379
From: Lake Wylie, SC, USA
Default RE: tranny flush or drain and fill ??

Use Honda OEM ATF-Z1 fluid only!!! costs about$6/qt. qts# needed 10-12
1. Bring the engine to operatingtemperature
2. You take out the drain plug (located on the pass (RH)side towards the frt bumper using a 3/8" ratchet) and approx. 2.5-3qts. will drain out
3. Put the plug back in. Add2.5-3 quarts (whatever gets you to the full mark).
4.Start up the engine and shift through all of the gears twice.
5. Shut it off, and drain again. Add 2.5-3qts (whatever gets you to the full mark),
6. Start the car and shift through all the gears twice.
7.Shut off the car, drain again and fill with 2.5-3qts. (whatever gets you to the full mark).
8. Start the car and shift through all of the gears twice.
9.Drain again and fill again with 2.5-3 qts. (whatever gets you to the full mark).
Now you are done! And good for another 100k miles ) This method will have replaced virtually all of your fluid.
This is what the Honda dealer will do and they will charge one hr labor - ($70-100 depending on the dealer) plus the fluid. DIY and save!
 
Old Mar 31, 2008 | 11:09 AM
  #6  
addiction2bass's Avatar
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
Default RE: tranny flush or drain and fill ??

if its a manual then ya only need like 2 quarts and a simple drain and fill....

^ previous details is for a automatic...

so depends which ya got.....
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NKaufman
Mechanical Problems & Technical Chat
2
May 19, 2010 06:26 PM
booboomc21
Mechanical Problems & Technical Chat
4
Nov 17, 2009 01:49 PM
ELLAS1945
Mechanical Problems & Technical Chat
4
May 17, 2007 08:30 PM
Mad7s
Engine & Internal
0
Jun 14, 2006 02:49 PM
amsmk
New Member Introductions
6
Jan 22, 2006 01:57 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:02 PM.