HCF Project Section - 900+whp EK

OK so I read the rules I have a civic with a crazy build from the ground up. In this thread I will be doing the fallowing.

Rear disc conversion
LSV T1 racedevelopment built motor swap
installing 2x pressure gauges
Boost gauge
widedband
seats
battery relocation
and audio/video installation
quick release steering wheel
oh i think thats it

Motor was built By Tony palo
B18A1 block
Golden eagle sleeves
Aries pistons 8.2:1 .030
Manly rods
eagle crank
morroso oil pan
B16A SI R head
Manley valve train
CTR cams
golden eagle cam gears
FUll Race T3 mani with dual WG flanges
dual Tial 44mm Vband WG
T3 T67 .70 A/R turbo
Full Race down pipe
steel 3" charge pipes
Apexi Noir exhaust tip
Custom 3.5" exhaust straight
Taylor battery box
HKS SSQV
T1 catch can
DSS axels
LS tranny
Quaife LSD
CC 4 PUC unsprung
MDS dizzy, coil pack, timing pack.
NGK wires
NGK pluggs
Inovative motor mounts
greddy boost gauge, oil press, fuel press, turbo timer.
Aem wideband
Hondata S300
Sparco seats
stock rear disc setup
muteki lug nuts
8 Point roll cage
Clarion DVD/NAV
JL speakers NO SUBS GAY
NRG short hub
NRG quick release wheel
personal steering wheel
SI gauge cluster
Silk Road coilovers
SK2 Lower control arms
Sk2 fron and rear Adj. camber kit
and a **** load more
the car a month after I got her I installed the seats
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC00924.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC00944.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC00926.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC00950.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC00949.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC00947.jpg
Now the car after I did the motor build on the B16A SI R
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01025.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01012.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01013.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01009.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01033.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01032.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01116.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01106.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01104.jpg
Now for the now build for the car
the rear disc as it went
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01135.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01184.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01453.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01452.jpg

The short hub
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01441-1.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01458.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01457.jpg
the turbo kit
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2.jpghttp://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/T3T67.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/sideview.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/Thenew****ohyeah700hereIcome.jpg
the catch can
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/T1can2.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/T1Can.jpg
the tranny with fresh paint
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01436.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01438.jpg
wideband
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSC01456.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload.jpg

More of the motor and turbo
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-1.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-1.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-1.jpg

I will post pics up asap. I will hope to have it done asap. Like on wednesday.

Looking pretty clean so far. I like the stock outside look, (but personally I'd ditch the 15" decal). Can't wait to see the dyno chart. Looks like the build could hit those numbers you want.

lol I think the decal is funny. Sick build! I normally don't like silver hatch's, but yours really makes it look super clean with the painted trim pieces. I like it.

Yeah the outside is all CTR side skirts bumpers and rear spoiler all of that. the paint was done about 18 months ago. I think I am gonna need to go T4 with that GT42R to make my #'s. I think the 15" is gonna stay when I send it into turbo mag and others. I am gonna try and get it in the mags as soon as the interior and the roll cage get done in silver again. I really need to find a photographer. I think they will feature it if I finish all the odds and ends here soon.

I think I am gonna try and find someone with a supra, rx7, or like a stock CTR, Itr I might trade it.

Nice build minge. Big fan of hatches.. Dont trade it. Any time slips?

you changed your mind like that in one minute?

IDK I really want a supra like really bad.

what color slips are those, according to rota?
just curious

Looking good.
Not a big fan of the 15"stickers or the roll cage through the rear seats, but its your ride.
Are you doing most of the work yourself?

I do all my work myself but I did not build this motor.

Tony Palo built the motor I built the last one and the one before that but not this one. But I did all the other work on the car myself.

so is it finished or in progress love the car very pretty any numbers hope you dont get rid of it.

Yeah lol I love it no it is in progress. I was out scrubbing the engine bay just now. I am working on a wire tuck. It is so much work, tape, and zip ties. ha ha idk I would have to have a really good trade to get rid of it.

what color slips are those, according to rota?
just curious

.....

Oh man idk actually I bought them off a friend i will look

Here she is had to take it back out to shave some stuff off for the wire tuck.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-4.jpg
Beautiful!

I know I should have changes the pully and got a new one but it works you know.

Hey so yeah working on the wire tuck now so I just moved the fuse box under the dash. I did it real clean put it in the spot of the air bag.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-5.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-2.jpg

Any more pic? You got my attention....

Yeah I am gonna take some here in the am. It wasn't bright enough in the garage tonight. I cleaned the rest of the engine compartment, redid the wire harness, took out all the **** I don't need. Man I have been working in this for almost 24hrs straight. I haven't even slept. I cant wait till I see the #'s on the dyno. I really hope I go over at least 650.

Here are some pics of it. I made the spark plug cover today. I also got the FULLRACE traction bars in and the cleaning done under the hood.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-2.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-2.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-5-1.jpg

Here we go I got some new stuff yesterday for the G ride lol. Got alot more coming today.
My new clarion double din
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-4.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-5.jpg
Got my battery kenetic
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-6.jpg
and the radiator overflow tank I got at street dreams usually for a hot rod nw for the civic lol.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-10.jpg

Here are the new motor mounts Avid solid mounts.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-7.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-11.jpg

the new tiers came today.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-12.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-6.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-8.jpg

Here is the batt relocation and the harness I jsut got it is a 3" cam lock.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-9.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-7.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-13.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-4-2.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-5.jpg

Here are some more pics from the other day.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-11.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-9.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-7.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-15.jpghttp://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-10.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-14.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-6.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-8.jpg

http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-16.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-12.jpg

http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-10.jpg

Ok so here are some pics I was painting the motor again just took the tape off after tha paint dried. So I am gonna paint it all silver. But yeah almost there. Just had to make another order from T1.
T1 inline fuel pump kit
T1 Pro 10 ignition kit
1000cc injectors
Aeromotive Pro Series, Boost Reference EFI Regulator
T1 Battery cut off kit
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-13.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-17.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-11.jpg

Hey so yeah got the most of the gauges in today.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-10.jpg

So yeah I am now at another stand still.
Waiting on braided line 10AN
Oh and a new half shaft
Umm but here are some pics of where i stopped tonight.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-17.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-6-3.jpg

sweet looking build, I can't wait to see more.

Thanks man I am gonna be working on this all day today might get the turbo on and intake mani by tonight. I still have to wait for my T1 pro 10 Ignition system. Oh and the inline fuel pump.

nice work so far man!
good luck with the rest

I get to pick up my half shaft tonight and my OBD1 OBD2 harness oh and a greddy EGT gauge. I was working on getting the tranny to fit right. I really wanna be finished in the next two weeks.

Well I am still working on this build and havent go much further I just had to make some major changes.
Parts no longer used from the pics
Edelbrock intake mani
MT ET streets
Full race manifold T3
T3 T67 turbo
Charge pipes
New parts here are some pics the fallowing are for sale that I just took off though if interested PM me.
Lenso racing wheels with MH 25 8.5x 13 front and MT ET Fronts
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-19.jpg
Bullseye S372 turbo with the T67 next to it makes it look sad lol.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-4-10.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-16.jpg
Here is a pic of the T67 and then one with the new S372
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-8-3.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-5-8.jpg
New full race mani T4
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-23.jpg
I will be sending the car to the paint shop next week. Painting it the color of the SK2 civic.
OK buying my new twin disc clutch and Air Endyne intake manifold this weekend.

Geez...how did i miss this build! Thats a beastly hatch :D







Don't trade......

Geez, thats pretty epic looking.

Yeah i was gonna try and just make like 700 now I have decided to well shoot for mid 900 range at like 45 to 50 psi. I hope to have her on the track here soon the it is gone I really wanna trade it for a MK4 supra tt.

I forgot all about this thing,she's really coming along nicely.
Why do you want to trad your hatch for a Supra?

^ because no matter how much power you have, it's still fwd.

Not really like that sorry. Not this civic is really fast yes but its just I buy and sell cars all the time and I have owned so many civics never anything like this no but I just want something diffrent. I really just want a tt MK4 supra.

Oh hell yeah

Got my new air endyne today here she is at TDC performance thanks Mike.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-13-2.jpg

damn that must really lower your intake air temperatures

Did u get it painted? any other updates?

when are you gonna get it on the dyno

Naa I am negotiating with the paint guy right now he is trying to charge about 3k for no body work just to change the color to flat black.

AHHHHHH SEXXXXX!!!!!!! rejkdfsbcnjbefdjsvcn xuwo more, now! lol.

So yeah I was talking tot he paint guy yesterday the car will be out of the paint shop next thursday. I have my DD there now also. It should be on the DYNO here in the next month.

OK so yeah I am trying to find some VOLK, Rays, Spoon's or something of the sort. I am looking for a 16x7.5 or wider in gold but has to be a high end wheel for this car. Oh bought my seats bought some SPARCO Corsa BLK seats for the ride. i also got a pair of new sparco shoes there dope yo. Oh I am buying my wheels for the Denali tomorrow so I will post the pics asap on here to show yall.

you have one amazing honda!

AHHHHHH SEXXXXX!!!!!!! rejkdfsbcnjbefdjsvcn xuwo more, now! lol.

And uh....what he said :D

if you dont mind me asking, what do you do for a living cause it seems like you have an unlimited amount of money.

Umm ok well this is gonna seem pretty fun but its not I am in the NAVY not the fun part. But I build cars from the junk yards and sell them and I mean there all clean ass builds and sell them with built motors turbo or na with full race interiors and fresh paint and body work. I make about 6k a month on that alone. So all you have to do is get 2 garages or storage building and tools and get really good at building hondas and your in there. I am trying to open my own shop I am enrolled for a EFI class then a hondata and aem class and then to other softwear to tune and just do this for a living. I will be moving to Norfolk, va here really soon so anyone in the area I am gonna be leasing a DYNO JET and be tuning a few diffrent bases.

JEALOUS!!!!! hire me!!!! lol.

Yeah I already have my people picked up there good friends of mine. I just need to start chatting with some VA people. So I am not all alone when I get there lol.

So yeah I will finally have the dang car back on monday from the paint booth. MURDERED OUT SON.
Flat black: paint, headlight, taillights, windows, the interior will be all blk. The wheels and the roll cage will be gold though. I ccan't wait to see what this thing is gonna look like. Pics monday!!!!

no, pics NOW! lol. sound sliek its guna look sicks actually.

Yeah I know man thanks.

w00t

murdered out!

that's how we roll

YA.... No for real this **** looks dope the ****ing turbo sticks out of the hood cause its so ****ing big. The exhaust comes out the front bumper on the pass side 5'' hell yeah. Both have carbon fiber rings around them like the T1 S2K.

Pics?????

I will have them up tomorrow night ya.

I will have them up tomorrow night ya.
This better be up.....or i call ban.=)

Hey yall I am at the shop were kinda busy and the car is still across the street so were gonna go and get it here in a few and bring it over then we will take some pics ya.

It's been like a week, where are the pics?

Ok I am just getting on I am taking care of family stuff right now in the FLA. I will be back in MS here soon to got to Mobile and get the pics of the car. I will be back sometime next week. I hope to have them up by wed next week sorry for all those waiting. Oh I am selling a set of percesion 1000cc injectors. I get to buy 1600's

Ok finally here it is I have been in florida for a while now but here is the car painted will be at the track here very soon guys. I did have the firewall shaved too.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSCF0940.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSCF0942.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSCF0943-1.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/DSCF0941.jpg

That looks sick :D

Interesting picture to look at. That's the cleanest/emptiest engine bay i've ever seen.

Hey thanks guys I am broke right now but I am scraping my change together to pay for the last few parts. I sent my avid solid motor mounts to the powter coater today to get done in the same color. I am really hoping to make over 953 to beat the Mfactory car. I will post more pics here soon the exhaust is gonne come straight off the turbo and out the fender and then the turbo will stick out the hood a little bit cause of its size. I painter the intercooler blk with radiator paint and now the windows are getting tinted. I will be at the import faceoff 2010 I am trying to make it to a few races this year though. I am selling the car when it is done though. So if any of ya are interested its gonna be a steal I have about 40k into this car and I am selling it for 20k.

Ok guys we started the reassembly today and she is coming fast. I just have some parts I still need and can't afford them right this sec with opening the shop and all. Came spend money at my shop.

Are you going to leave it flat black? I think you definitely should

Yeah I am everything besides the cage, wheels(Volk te37, lenso drag wheels both bronze), and the motor mounts everything else flat blk. Idk what I am gonna do with the turbo cause it is still grey and it will stick through the hood by 6" so it needs to get painted to well poster coated. So idk what I am gonna do there cause that turbo is ****ing retarded it's a s372 same as a gt45r

Clean ass hatch bro looks sick

Hoping To break the b series who record withthis thing changed all my fuel lines to 12an and my t1 catch can is sold and got another one made by mike Amerson at tdc performance mobile,al this guy is amazing. Well it is sill a 1gal can with 12an lines vs 10an lines with the t1 can even though Tony palos t1 cans are amazing though.

Any more recent pics? This is going to be ridiculous. I couldnt imagine having this kind of money in a car.

Yeah I will get the updates when I go back to the shop Tuesday and start working I am hoping to have the motor in by the end of the week

are you gonna dyno it before you sell it?

Yeah, what's happening with this project? Any updates? Looking ABSOLUTELY AMAZING man!

Any more recent pics? This is going to be ridiculous. I couldnt imagine having this kind of money in a car.

No doubt. That is a good chunk of money.
Not to be too personal, but what do you do for a living?

Edit: The question is for Turbo00EK. Just incase there was confusion

A federal jury Thursday found a 32-year-old Minnesota woman guilty of illegally downloading music from the Internet and fined her $80,000 each -- a total of $1.9 million -- for 24 songs.

Jammie Thomas-Rasset's case was the first such copyright infringement case to go to trial in the United States, her attorney said. [link removed by reaper2022]

Attorney Joe Sibley said that his client was shocked at the fine, noting that the price tag on the songs she downloaded was 99 cents.

Health Top Tips Nutrition Love Lifestyle Happiness Weight Loss
[link removed by reaper2022]
She plans to appeal, he said.

Cara Duckworth, a spokeswoman for the Recording Industry Association of America, said the association was "pleased that the jury agreed with the evidence and found the defendant liable."

"We appreciate the jury's service and that they take this as seriously as we do," she said.
[link removed by reaper2022]
Thomas-Rasset downloaded work by artists such as No Doubt, Linkin Park, Gloria Estefan and Sheryl Crow.

This was the second trial for Thomas-Rasset. The judge ordered a retrial in 2007 after there was an error in the wording of jury instructions.
[link removed by reaper2022]
The fines jumped considerably from the first trial, which granted just $220,000 to the recording companies.

Thomas-Rasset is married with four children and works for an Indian tribe in Minnesota.

ban???

OK OK I am still here just havent been working on it like that I have been building a 91
EF9 that I picked up the other day. I don't really like it nor do I think I willl do a build thread but I am gonna do a K20A ITR swap into it and do some ITB's and a header or something like that. But IDK ill post some pics of it. I will tAke some pics here real soon and get them up. I will probly do it saturday. I am moving to VA if any of yall are up that way selling shpo to my boy and his wife so I will be free of all that and maybe open another up in the VA area.

Moving for work? Thats the only reason someone would move to VA haha.

Yeah I am transfering there in 3 weeks. I will be there for the next 2 years then I am out of the navy.

Ok guys here is a youtube link to the car. I took a video the other day.
http://www.youtube.com/watch?v=FIOTO6Amqhc

Ok here are a few pics of some parts the good pics will be up in like a week.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/1247716085.jpg

Nice teaser video.... dam man i cant wait to see some pics... ANDWTF I WANNA SEE THE EF TOOOOOOOOOOOOOOO! haha

yeah I will here in a minute Ill start a build thread. I really wanna sell this car fast though.

Is that a Type R wing?

That is a R wing.....real i cant tell, but it also has the backyard brackets that lift the wing for more down force.

Last edited by reaper2022; 07-17-2009 at 05:50 AM. Reason: removed the links

Bahahahaha 5:50 AM, What you doing up that early, thats just silly :P

Maybe he was just up that late...its called third shift.

Ok all the panels on my car the hood bumpers all of it are CTR. It is all JDM even the rear hatch with the glass and all I know we removed the purple tint from it. But anyways We worked on it a bit this am and well the motor mounts are waiting on powter coating. I am having allot of custom pipe fabing tight now like 3'' charge pipes and a 4.5'' exhaust that goes from the turbo straight out the side of the car. I am having the VOLK wheels put on here soon for when the car is on the trailer and moving it around the shop I'll post some pics of them soon. I really hope to finish this car by the end of the month or mid next month it keeps getting pushed back further and further.

Bahahahaha 5:50 AM, What you doing up that early, thats just silly :P

i cant remember, prolly drunk

4.5" exhaust is crazy. Get this thing moving!

Yeah man I am trying bro lack of funds. I now have 4 project cars going at once and I am just trying to get the other three built and sold. See I can make like 3 to 4 thousand off of these cars do that pays for the SFWD EK. So I also have costumer cars here to work on to to pay for the shop so see BROKE lol. Naa i will have it complete and tuned in about 3 weeks promise.

I hear you about the funds, sucks.
But on the plus side, once you sell the other cars you will have money.
What kinda cars are you selling?

Well I have a 97EK coupe and it has a B16A with ctr pistons, cams, valvetrain with a S4C tranny from gearspeed trans and stock body with bride seats ans a personal steering wheels tokick shocks eibach springs and some rota slips and many other mods to the engine.
I also have a EG with an ITR motor and trans with a CAI and a Exhaust
then I just sold my EF HB that I got the other day it was just a shell though.

Ok so yeah I welded up the new cage pipes, and some chassy pieces. I am gonna get the cage pipes installed and it all painted again.

Very nice,
The car so clean and an engine were ppl dream about!

This is one sweet car!

I'll hope u make it in time...

Have u got some recent pics?

Yeah ummm I guess I have put many years into building these types of cars. Oh I am using steel piping just because and it wont have any flex anyways. I am using Vband charge pipe clamping system. I would think all the weight you can get up front the better though. My target power is over 953. I am gonna be running 50psi through the motor. I am going for the honda Bseries record for street car whp. Oh and the WG Bar is 1.3. And I am running a Quaife LSD. The tranny I am running now is gonna be a PPG DOG setup with billit housing.

Oh hey here is a pic of the truck I bought 2 months back to tow the EK.
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-1-23.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-30.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-2-21.jpg
http://i212.photobucket.com/albums/cc13/BIG_BOOST_EG4/securedownload-3-18.jpg

Nice truck, I really want one to be able to tow my cars :( lemme borrow it :D

Yeah I am selling my 04 acura TL

So yeah im freaking out lost my injectors somewhere have you seen then AAAAHHHHHH!!!!!!!

I want.

Yeah I am telling you if you can get to a GM dealer and afford like 35K you can get one I got 20K off the sticker on this truck cause of the financial problems.

Can't u use the ecu + boostcontroller? so u get max power on the wheel without spin out.
A friend of mine is going to use that to get his b16 build for a gt30 turbo with s80 (LSD) drivetrain stready on the road. What a beast is that.XD
And this is way faster!!1!
Weight isn't good at all, I would try to keep is as light as i could.
Less weight is easyer to move.
IMO upgrade grip.

Question: At what range does your turbo spool?

Try find some vids from a yellow/orange crx from "sneaky tuning".
They hold the europe fwd drag record.
Seen it race XD hell, that is one fast car.

k I got ya bro that is the tranny that I am running. No with FWD cars with that much power the car is so light you get allot of spin the the more weight the marrier. I have been building these cars for some time now but this is the first one to hit over 700whp. I have built and drove many cars over 550 to 700 whp. Yes I am running a S300 with boost cont. Naaa I am not gonna run an external boost cont for the max you don't need it it is taken care of by the S300.

Hey guys I am still here working slowly. I am now just waiting on PPG to get the trans to me it is all built and ready to go. I will have it on the dyno by the end of the month god money is getting tight now that I bought my new truck lol. But hey I am still moving on. Got some new parts in and got all the piping fabed up will post pics of it all tomorrow night at the latest.
Dog gear box
straight cut gears
5th gear handcuff
and a new gear box casing
NEW PARTS
tons of braided hose from EARL'S all in blk and the motor parts just came back from the powter coater.

Nice. Im expecting a pretty bay. haha

Yeah I hope it is IDK about the gold and blk color skeem. IDK though I just wanna get her done in time for englishtown.

Black and gold win every time. haha. Im in the process of finding some gold/polished wheels now...BBS or GT3s.

Yeah I just got my TE37's the other day.

Nice choice.

Dog gear box
straight cut gears
5th gear handcuff
and a new gear box casing
NEW PARTS
tons of braided hose from EARL'S all in blk and the motor parts just came back from the powter coater.

Be sure to post a video or sound clip of the tranny in action once its in. Straight cut gears sound hideously fun.

Yeah man I know I heard Tony Palo's he runs the T1 Teggy that thing sounded sick. I had a gear speed tranny with straight cut gears before but not a dog box but it still sounded good.

Ok I am done with this site if some things dont change here. If my sig is changed I am leaving, if my posts are just gonna get bashed I am leaving cause people on here are offended by my posts when I ask any type of question. I just come here to give advise, post my project on a site for CIVIC'S! IDK am I the only one that see's this my way.

Well your sig is actually against the rules because you are advertising for a business... I hope you understand. The rule has been that way forever.

I have nothing against you, I don't know why everyone else does.

Ok I am done with this site if some things dont change here. If my sig is changed I am leaving, if my posts are just gonna get bashed I am leaving cause people on here are offended by my posts when I ask any type of question. I just come here to give advise, post my project on a site for CIVIC'S! IDK am I the only one that see's this my way.

I like following your thread.
I have no problem with you at all, and btw mods stick together pretty much so thats not smart to go talking trash to them.

You got bashed because:

Reaper's thread - He is a mod and has helped hundreds of people with their civic problem. You come on this site for one reason, to update your build thread, you dont help nor seek help, you only come to show us your Beast civic.

Greddy Civic's Thread - You go in questioning his car and thinking he calls it THE GREDDY CIVIC but no he actually doesn't. If you had read the first post of his build thread, or even glance at any of his old build thread than you would realize he is boosted.

Thats honestly the only 2 times i have seen you post anywhere besides in your build thread....

Oh yea, that's right. Man, just don't try and start fights/arguments with moderators and you won't have a problem.

Oh yea, that's right. Man, just don't try and start fights/arguments with moderators and you won't have a problem.

meaning?

hi mate i am being onist u have 1 sick car :)

meaning?

such as when he went in reaper's thread and tried to complain to him about his car not being a civic so it was technically against the rules.

Umm ok well this is gonna seem pretty fun but its not I am in the NAVY not the fun part. But I build cars from the junk yards and sell them and I mean there all clean ass builds and sell them with built motors turbo or na with full race interiors and fresh paint and body work. I make about 6k a month on that alone. So all you have to do is get 2 garages or storage building and tools and get really good at building hondas and your in there. I am trying to open my own shop I am enrolled for a EFI class then a hondata and aem class and then to other softwear to tune and just do this for a living. I will be moving to Norfolk, va here really soon so anyone in the area I am gonna be leasing a DYNO JET and be tuning a few diffrent bases.

Yo I live in Norfolk, VA. You got here yet? I wanna see this in person, and maybe you found a shop near here, I have been looking but no luck.
I'm guessing you are at least an E-7or E-8?

Hey sup guys well sorry for all the drama. I will try to stay in my own thread. Umm no I am not in VA yet I will be soon and I am gonna bo opening another shop there but a small one for the first year or so. Oh I am an E-5 but so is my wife so we do good lol.

whats an e-5?

It is like a SGT in any other force but the navy I am a 2nd class petty officer. I'm a contingency engineer for the NAVY. I am getting out really soon like 18 months so I opened my shop a while back with the help of some friends I started DOIN WORK now I am selling it to family and opening another one in VA probly in VA beach.

ooo good deal! Id like to open a shop someday, but more toward R&D of aftermarket products (hence why im going for mechanical engineering)

Yeah I did my BS in electrical engineering at The University Of Florida. It is a good thing to get into. I am gonna be doing a second BS in Mech Engineering. When I am done I would like to try for the masters program there.

Hey sup guys well sorry for all the drama. I will try to stay in my own thread. Umm no I am not in VA yet I will be soon and I am gonna bo opening another shop there but a small one for the first year or so. Oh I am an E-5 but so is my wife so we do good lol.

ah, i'm a e-4 in the army and my wife dont work so just my income for my hatch. it blows

where you going to be at? Little Creek, Oceana, Norfolk Naval?

Little creek for the next 18 months the wife will be in Norfolk.

Nice, I live right down the rode from Little Creek, in fact I live on E Little Creek Rd. sorta. I work at Fort Story on the beach, which the Navy takes over starting October it will be part of LC.

Oh ok man yeah IDK anything about it up there i have never been there so. But I have heard many good things about the area. Are there allot of nice cars up there? Oh hey and where is the nearest drag strip?

I do think the nearest one is Richmond, Virignia. Or the Virginia Motorsports Park.
http://www.virginiamotorsportspk.com/drag/Travel/Directions.aspx

I heard of a couple car shows, but never went. But there is alot of rich people cars.
Lamborghini's, Porsche's, Ferrari's. Travel down to the oceanfront strip you are sure to find something.

A couple people have GTR's but mainly old people ;/

Sweet I can go and **** with them in my little honda. Hey like are the 5-0 bad up there like my exhause comes out my fender and Wastegates dump out my hood and I have a gold roll cage but everything works man I am worried about the cops but I am keeping my Florida plates? I might take the EK out once and a while but I will run it on the track at least once a month. I am trying to rent a home in VA beach right now. I am also gonna be looking for a shop to rent I called Dynojet and they will give me a deal on dyno installation and get me setup asap.

Well I only got pulled over once and I been here for 2 years. I was going 76 in 55 on Interstate. $197 ticket. Other then that it not that bad. Keep the FL plates don't get VA, I made that mistake. you have your car inspected every year, it's crap. I'm about to go back to Tennessee tags at the end of the month. As for the shop, IDK. I been trying to just find a place to paint my car and interior alittle. It sucks when a family of 3 is only living off e-4 pay, haha.

Yeah I just need a good location even if it is like what I have now a 40x40 building I am renting. If I can find something like that there for like 600$ a month then I will do it. I will probly just do a Dyno and a lift I have all the tools the lift and the roll on lift for the dyno. I just bought a new Tig machine the other day from Lincon its there 225 Kit man it is easy to use I love it. So I will be doing minor fab work. But anyways I have a friend moving there soon he has been doing all the installs and I do all the fab and tuning. But yeah hope to be setup in the first 6 months of being there.

Yea, just so you know houses are not cheap here being so close to the beach. But BAH is $1310? I think for E-4 and below. And $1500+ for E-5 and on up. I got an apartment for $692 2 bedroom and bank the rest of my BAH. I'm sure you will find a house though. Could always do the VA Loan and buy a house.

Yeah bro I know it is really pricy to live there.

VA is ok. But the cops down there are a$$es. They won't give you a break for anything relating to speed. They have given MoCo cops off duty tickets for going 12-15 over on the highway. Where in VA you gonna be? Northern?

Virginia Beach.

VA is ok. But the cops down there are a$$es. They won't give you a break for anything relating to speed. They have given MoCo cops off duty tickets for going 12-15 over on the highway. Where in VA you gonna be? Northern?

Only the state cops are a$$es here really. The MP's on the Army base are kinda too, but the local county and city cops are alright. I been pulled over and the cop just told me I need to learn how to drive for cutting him off, haha. I was just weaving through lanes going home.

But Turbo once you get a shop here let me know so I can bring my civic around for some work, haha

Yeah man for sure I will be starting work asap when I get there and I have a ton of parts for sale.

Sweet. one question right quick, where ya get ya roll cage?

Ok well I am out this site wont let me advertise for T1 race or my shop or even my buddy Mikes in ym own sig I think thats gay so I am out when the admid and mods wanna stop playing games and changing the rules for their buddies so when they change my sig back ill come back to the site call me an ass or whatever but oh well.

I made the roll cage myself.

Nice, I'm wanting to put in a 8pt cage since I got the rear all cleaned up now, after that I wanna get custom made boxes for each side with a 10in and 6in speakers in each.

You moved to Norfolk yet?

He got banned for being an a**f*ck and making another account for the sole purpose of bashing the forum and generally insulting every member on the forum. In other words, he's not going to be responding.

Too bad Turbo EK was being such a pansy. Kind of looking to be a super impressive build, but not as bad ass as my NA D-series I'm doing. :P JP