sorry, It wouldn't allow me to post to the DIY section.

If someone could direct me to a link on how to remove the front bumper of a 95 civic HB (installing cold air intake) I could figure it out, but hopefully this will eliminate some of the frustration.

thanks a lot!

 

If you have foglights (otherwise skip to step 3)
1. Remove the 2 screws on each foglight cover
2. With a long socket extension (10 or 12mm) remove the 1 bolt holding the foglight bracket to the frame for each light.
3. Remove the 2? bolts on the bottom of the bumper.
4. Remove or pull back the inner fender nearest the notch in the front bumper. Remove the 1 screw on each side of the bumper.
5. Remove the 5 screws on top of the bumper.
6.With a blanket on the ground, remove the bumper and set it down. If you have foglights, unplug them.

 

thanks a ton, got it all done, and the cold air sound incredible with an open throttle (under load).