Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

i should be getting it in the next few days, this IS my first Mod to the car(just bought it last week) ive read around and decided im gonna do the install myself because it doesnt look like its too hard, the only thing i noticed is that you have to take off the front right Wheel, now, this is basically the only part im concerned about, what tools will i need to do this? i was also wondering if i should disconnect the battery before i do to the install?

any help is appreciated

thanks

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

jack up the car, take the lug wrench, loosen the lug nuts, pull off the wheel, take a screw driver, loosen the bolts to the fender liner, and peel it back. u dont have to disconnect the battery but most ppl do.

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

loosten the lug nuts before you jack it up!

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

I hope you have good tools. You have to change your transmission mount. I'm 100% serious.

you should have a good set of 6-point sockets (up to 19mm) with extensions and a 18" breaker bar. Bench vise might help too.

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

What!? Details?

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

big +1...never heard of that before.

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

c'mon guys, we've been over this before. this is the reason that they specify it's for manual transmission only on 96-00 Civics. The intake comes down in front of the tranny and then turns into the space in front of the wheel, behind the bumper. You replace the mount right there with a different shaped piece that has a mounting hole in it for the intake. Here are pics from my install last year. https://www.hondacivicforum.com/m_94366/tm.htm

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

<----- never installed a cai on a manual... never installed a cai period come to think of it.

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

I take this only applies to the V2? Because I didn't have to do anything like that for my AEM CAI

RE: Bought an AEM v2 Intake for my 96' EX Coupe, Installation questions
 

im glad my v2 only came in sri....to much damn drama