HondaCivicForum.com

HondaCivicForum.com (https://www.hondacivicforum.com/forum/)
-   EP Swaps (https://www.hondacivicforum.com/forum/ep-swaps-38/)
-   -   B16A or K20A for civic EX (https://www.hondacivicforum.com/forum/ep-swaps-38/b16a-k20a-civic-ex-1098/)

quincearj Sep 13, 2004 10:07 PM

B16A or K20A for civic EX
 
i need a suggestion, planning to have a 04 or 05 civic 4dr just wanna know if i can engine swap with B16a or the K20A coz civics in Asian countries they have a 2.0L civic w/c comes with the engine of US civic SI.

NTX Sep 13, 2004 11:49 PM

RE: B16A or K20A for civic EX
 
i wouldnt try to put a b series into an 04 or 05.

White_Devil Sep 14, 2004 11:47 PM

RE: B16A or K20A for civic EX
 
Yeah i agree. The K series is the next engine generation for Honda. Go with it and i'd bet it will go into an 04 or 05 easier and have more aftermarket parts available then a b series in a few years.

sacicons Sep 14, 2004 11:54 PM

RE: B16A or K20A for civic EX
 
i think Hasport has a kit to do this swap. i know it has some bugs we're not used to in our b-series swaps, like the ecu is programmed to the key, so you have to get it reprogrammed at acura. otherwise it wont start. its been done ( the k not the b) so the info is out there. you might also want to check out area51 fabrications, they have done the k series into an ek civic, so they should have some info and kits available as well.

reddragon Sep 15, 2004 12:18 AM

RE: B16A or K20A for civic EX
 
in order to put any k series engine into a ek you have to spend $700 on the engine mounts themselves

sacicons Sep 15, 2004 12:37 AM

RE: B16A or K20A for civic EX
 
yeah, i like the idea, but i dont see why you would do it right now. the b-series engines are too easy to swap to go and make it harder. sure the k-series are better, and the b-series are going to start being replaced, but until the prices and kinks get worked out to decent levels, ill stick with my B. i wasnt suggesting a k-ek swap, just saying it had been done.

2000Si Sep 15, 2004 01:04 AM

RE: B16A or K20A for civic EX
 

ORIGINAL: reddragon

in order to put any k series engine into a ek you have to spend $700 on the engine mounts themselves
Yeah, but he has an EP (01+), not an EK (96-00).

K Series motors are great, until you try to turbo em... then they blow up.

NTX Sep 15, 2004 02:28 AM

RE: B16A or K20A for civic EX
 

Yeah, but he has an EP (01+), not an EK (96-00).
that's why the b16 is not a good idea.

sacicons Sep 15, 2004 11:09 AM

RE: B16A or K20A for civic EX
 
i know a guy with a greddy turbo on his RSX type S w/o intercooler and i think 7 psi, other than some mild detonation from crappy 91 octane, hes done ok. i told him to get some race gas to see if it would fix it. hes benn running the turbo for a few months though. it probly just needs a good tuner.

reddragon Sep 15, 2004 11:55 PM

RE: B16A or K20A for civic EX
 
a friend of mine also has an ep but its turboed and he just got an intercooler and has had it turboed for over a year with no problem, a friend of mine has a ek9 and we've looked at putting a 05 RSX Type S engine in it so i think i would know a little about the engine swap. dont mean to sound rude...


All times are GMT -8. The time now is 07:09 PM.


© 2026 MH Sub I, LLC dba Internet Brands