need 2 engines. new 2 forum. need advice.
 

Hello,

I just registered and am trying to track down some information for my brother-in-law. He has (2) honda civics that he needs engines for. He has a '96 EX coupe and a '98 EX coupe. both have blown engines. He would rather have a JDM. He doesnt want to fork out the cash for a new one from one of the local auto parts chains. What does everyone here recommend. I know he wants something that will be a clean swap, without alot of additional work and changing additional parts around. From what little research I've done it looks like you can swap them out with JDM engines without any changes. Is this true? If so, I guess what I'm really looking to gain from this post is a list of the most recommended suppliers for these engines, what type of warranties I should expect and what engine I should be looking for when contacting them, and what price range I should expect. Both cars are manual trans. Thanks in advance for all of the help, advice, opinions, etc. I look forward to being able to find him a couple of quality reliable engines from research on this site. Thanks again.

--McBride

RE: need 2 engines. new 2 forum. need advice.
 

http://www.naganojapanese.com/jdm_d15b.htm

RE: need 2 engines. new 2 forum. need advice.
 

or http://www.naganojapanese.com/jdm_zcdohcg2.htm

RE: need 2 engines. new 2 forum. need advice.
 

which engines should I be looking for? I'm really surprised that I havent received any more replies on this question. Did I post it into the wrong forum?

--mcbride

RE: need 2 engines. new 2 forum. need advice.
 

Any civic/integra engine from 92 to 00 will work,the ones from 92-95 will need a obd conversion harness and a obd1 ECU. The integra engines will also need a B series tranny,integra axels,and a new rear motor mount

RE: need 2 engines. new 2 forum. need advice.
 

JDM D15B
D16Z6
D16Y8

B16A2
B16A---yes they are different
B17
B18A
B18B1
B18B2
B18C1
B18C5
B20B

that is in order from the cheapest to most expensive

RE: need 2 engines. new 2 forum. need advice.
 

here's one: https://www.hondacivicforum.com/m_81073/tm.htm

RE: need 2 engines. new 2 forum. need advice.
 

I dont think there is a JDM B16A2......I think its just a B16A


Actually I think it might be that JDM motors are only like a B18C or a B16A and no numbers on the end.

RE: need 2 engines. new 2 forum. need advice.
 

B16A2 = USDM version

RE: need 2 engines. new 2 forum. need advice.
 

he would have to convert to cable tranny which = alot of un-needed bs IMO