ECU Tuning & Fuel Management Discuss electronics and related components within.

computer changing ai/ratio b/c of cold air intake

Thread Tools
 
Search this Thread
 
  #1  
Old 05-31-2004, 12:52 PM
baker7598's Avatar
Thread Starter
Join Date: May 2004
Location:
Posts: 25
Default computer changing ai/ratio b/c of cold air intake

Just wondering if anyone knows if by putting on a true cold air intake on a 90 civic dx 1.5 if the computer will learn to change the air/fuel ratio? I'm chaning out the O2 sensor today and am wondering if the computer will compesate for the cold air intake. Should I disconnect the battery for about 15-20 so the computer will relearn everything?
 
  #2  
Old 11-08-2004, 11:19 PM
Join Date: Oct 2004
Location: Santa Clarita, California
Posts: 839
Default RE: computer changing ai/ratio b/c of cold air intake

no one has ever replied to this look at the date posted!!!!
 
  #3  
Old 11-09-2004, 03:51 AM
polo708's Avatar
HCF Member
Join Date: Apr 2004
Location: Arizona
Posts: 2,156
Default RE: computer changing ai/ratio b/c of cold air intake

With something minor the computer will learn, with a turbo/supercharger its too much for the stock computer alone so thats when you need a new ecu or piggyback. Its also a good idea to disconnect your battery after all performance mods, let it idle for about 10 minutes.
 
  #4  
Old 11-09-2004, 09:36 PM
Join Date: Aug 2004
Location:
Posts: 266
Default RE: computer changing ai/ratio b/c of cold air intake


ORIGINAL: polo708

With something minor the computer will learn, with a turbo/supercharger its too much for the stock computer alone so thats when you need a new ecu or piggyback. Its also a good idea to disconnect your battery after all performance mods, let it idle for about 10 minutes.
and then you'd want to drive around normally so it can relearn the fuel/timing curves.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
civicex1995
Transmission & Differential
0
10-10-2011 10:10 AM
Method
Engine & Internal
5
09-09-2006 10:24 PM
civic^2
Header, Intake, & Exhaust
5
08-22-2006 10:46 PM
Bostonhoodhop
Header, Intake, & Exhaust
6
08-01-2006 08:57 AM
Technician
Header, Intake, & Exhaust
8
10-12-2005 09:23 AM



Quick Reply: computer changing ai/ratio b/c of cold air intake



All times are GMT -8. The time now is 11:35 AM.