DSM 450 Help
1 Attachment(s)
So i get how to wire the resistor box, take all 4 of the same colored wires, wire them into one, wire that one into hte resistor box, then wire the 4 wires coming off of the resistor box to the original 4 wires you cut. I know you need the box to change the impendance, but on my car, this is what my injectors clips look:
Attachment 33620 the clip wiresgo yellow/black and yellow, blue and yellow/black, red and yellow/black, and then another red and yellow/black. So should i wire all the yellow/black wires to the resistor box? Also, when they say you need new clips, is that becasue the Honda clips wont clip onto the DSM clips? And if so, how do you wire the new clips in? Do you actually have to cut/splice hte new clips in? http://i4.ebayimg.com/01/i/000/ag/b4/f400_1.JPG i see in tha tpicture for example, it shows the clips, so you have to cut the exisiting clip wires and wire those clips in? And do you NEED to bore? I read on an older thread about DSMs that a few peoples aid you had to bore, and a few others said they just used grease and slid them in there. |
RE: DSM 450 Help
1 Attachment(s)
Attachment 33617
talking to people in the chat, this is kind of what i figured out. Wire all the same colored wires through the box, have all the individual ones bypass the box, then when you have all of the wries ready to go to the clips, splice in the new DSM clips, correct? Tony, if you view this thatd be cool if you could respond, a few people said you might know whats up here |
RE: DSM 450 Help
This is forty04 posting drunk from Tyler's account. Heres the diagram I made for dfdon a while back, should help.
https://www.hondacivicforum.com/upfi...69C2FAC1C8.jpg Just color match the other wires to the ones in your stock harness, it should be fairly obvious which ones match. If not, list the colors EDIT: Also, Tyler and I both had to bore the seals to make them work. Its not hard if you have access to a dremel. |
RE: DSM 450 Help
Here is a DIY from d-series.org but they used something different than the resistor box. You can at least look at it to see another way to make the dsm's fit into your intake manifold, they grind the o-ring down instead of boring the holes.
|
RE: DSM 450 Help
the colors of my wires go yellow and yellow/black, blue and yellow/black, red and yellow/black, red and yellow/black. Which wires get wired through the resistor box? All the yellow/blacks? And you're saying the DSM clips should have the same color code as my Honda clips?
and Mobsta i dont see the DIY man :eek: |
RE: DSM 450 Help
It helps a little more if I post the link doesn't it? lol sorry.... http://www.d-series.org/forums//showthread.php?t=7216
|
RE: DSM 450 Help
ORIGINAL: FlipHKD720 the colors of my wires go yellow and yellow/black, blue and yellow/black, red and yellow/black, red and yellow/black. Which wires get wired through the resistor box? All the yellow/blacks? And you're saying the DSM clips should have the same color code as my Honda clips? |
RE: DSM 450 Help
i thought u didnt need the clips from an eclipse to do the install u can use ur honda clips u just have to cut off a little plastic tab on the injector for it to fit
|
RE: DSM 450 Help
wired all the yellow/black wires to the resistor box.
|
RE: DSM 450 Help
ORIGINAL: Forty04 ORIGINAL: FlipHKD720 the colors of my wires go yellow and yellow/black, blue and yellow/black, red and yellow/black, red and yellow/black. Which wires get wired through the resistor box? All the yellow/blacks? And you're saying the DSM clips should have the same color code as my Honda clips? and thanks for the help btw gsumano :) |
RE: DSM 450 Help
ORIGINAL: Mr Mobsta Man It helps a little more if I post the link doesn't it? lol sorry.... http://www.d-series.org/forums//showthread.php?t=7216 |
RE: DSM 450 Help
yep thats what ill be doin this week so i hope its right
|
RE: DSM 450 Help
cool, you doing it just how i said up there ^ ? let me know how it turns out
|
RE: DSM 450 Help
u got it i prolly wont get time till the end of the week though got two a days for football startin this week
|
RE: DSM 450 Help
2 Attachment(s)
Attachment 33163
DSMs are here :)bluetops, and i just need to make sure about something. Should i wire all the yellow/black wires into the 4 black wires here on the resistor box, then wire the other side of the yellow/black wires into the red wire coming off the box and just cut htis harness off?: Attachment 33164 |
RE: DSM 450 Help
buuuuump, come on guys, need some confirmation on this!
|
RE: DSM 450 Help
|
RE: DSM 450 Help
[sm=bangbang.gif]
(i've found myself using this smiley alot on this whole turbo project [:@] thanks alot though Tony) |
RE: DSM 450 Help
ORIGINAL: FlipHKD720 [sm=bangbang.gif] (i've found myself using this smiley alot on this whole turbo project [:@] thanks alot though Tony) Good luck |
RE: DSM 450 Help
thanks man, and thanks again for the DSMs:):):) i was shocked/stoked when you asked to trade straight up for some DSMs
You get the RCs yet? |
RE: DSM 450 Help
Yeah I got them. Just sittin in the garage same place the dsm's were;)
I'm sure those will sit there for a year or so. |
RE: DSM 450 Help
haha well as long as you got them:)
|
RE: DSM 450 Help
heres a link that really helped me to understand how to wire the box in http://www.geocities.com/uncgolf25/DSMINJECTOR.html
i still havent gotten to putting mine in yet though how bought u |
RE: DSM 450 Help
yea that helps alot, confirms what i was planning on doing:) thanks alot!
and no i'm not gonna install the new injectors til the final install, dont wanna be runnin rich ya know? |
RE: DSM 450 Help
ORIGINAL: Mr Mobsta Man It helps a little more if I post the link doesn't it? lol sorry.... http://www.d-series.org/forums//showthread.php?t=7216 so i guess clips are the only way then? Unless you can take the little black casing off around the injector clip? Because i think thast what is blocking them from plugging in? Anyone know? |
RE: DSM 450 Help
anybody? clips the only way?
|
RE: DSM 450 Help
i'm talkin to myself guys :(
|
RE: DSM 450 Help
im pretty sure u should be able to fit the injectors in the stock clips sorry i havent gotten to it yet so i wouldnt be able to tell u if mine worked
|
RE: DSM 450 Help
Why in the hell are you cutting apart your injectors?![:@] All you're supposed to do is wire the dsm clips into your stock wiring, and plug them into the injectors
|
RE: DSM 450 Help
ORIGINAL: Mr Mobsta Man It helps a little more if I post the link doesn't it? lol sorry.... http://www.d-series.org/forums//showthread.php?t=7216 i dont have clips and that DIY says you can do it without them |
RE: DSM 450 Help
clips are about $15 shipped
|
RE: DSM 450 Help
cool, just on ebay? I couldnt find any auctions with just the clips, it usually included the injectors or resistor box as well and i didnt really wanna pay for anyhting i alreayd had....
|
RE: DSM 450 Help
check homemadeturbo.com
|
RE: DSM 450 Help
|
RE: DSM 450 Help
perfect, thanks alot Chris :)
|
RE: DSM 450 Help
so when ur wiring the box in do u only have to wire one of the 2 wires on the injector clips and the other one u leave alone that is if i was going to use the stock clips i would only need to cut one of the two wires on the injector right
|
RE: DSM 450 Help
if you were using stock clips, correct, whichever color is common throughout all the clips is the one you need to wire through the resistor box, but and once the wires go through the resistor box, then you can wire in the DSM cips
|
RE: DSM 450 Help
im still hopin that i can make the stock clips work when i finally get around to doin this
|
RE: DSM 450 Help
Don't be lazy, and do it right. The more things you do correctly, the less **** you'll have to worry about malfunctioning later[:@]
|
RE: DSM 450 Help
well if they work then its right but if they dont then i guess ill have to go out and get me some dsm clips but this is a month or so from now so im not worrying bout it yet
|
All times are GMT -8. The time now is 12:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands