doing a ls/vtec swap. I'm running a p28 ECU when i opened it up it had a mugen chip installed. I want to know how i can figure out what type of program is this. what are the specs of this chip? any help is great

 

um, chances are it's just crap. did you buy the car with it installed? and what's up with the title? 500hp?

 

i bought the car with it but the car was a basket case. i open the ecu up and saw the mugen brand chip. i thought mugen was a high dollar company? anyway how do ifind the specs?

the title is an eye catcher. although the person i bought the car from told me it was capable of 500hp. but im not too sure about that feat.

 

It's probably a fake, or maybe a sticker. 20hp yo!

 

well...it is capable of 500hp, every car on the road is

 

guys any help with finding out what this chip is capable of. What does anyone recommend doing. Chunking it out and getting a different program? i need some pratical advice. thanks

 

what do you mean, what the chip is capable of? if you don't notice anything spectacular (which you won't) then it's doing nothing. and a chip doesn't mean what a motor is capable of.

 

Freak the chip! Anyway is a VAFC II a good method to tuning a car? does it allow me to add and subtract air and fuel? or just gives me the readings for both. Im tryin to put all the pieces together while the motor is in the final stages at the machine shop. Suggestions on wideband o2 brands, managment system, hondata, aems. what has been ya'lls experience with ecu tuning and fuel management.

any advice is helpful

 

No the ecu is allready socketed get a person to burn you a chip dedicated to your setup. Roto on this forum has the ability to burn chips i think.

 

Roto can u call me to explain my chip/ecu options. thanks 979-324-8127