mini me assistance
#1
mini me assistance
I'm very seriously thinking of doing a mini me swap I've got a y7 and want a y8 but am a little fuzzy on what I need. I know that I need a y8 head a v-tec solenoid and from what ive heard an ex ecu is there anything at all that I will need to complete this?
#2
y8 head
y8 intake manofold (dont have to but is a gain+)
y8 wire harness (you need the vtec plug and the oil pressure switch plug from it)
y8 dizzy 0bd2 96-00
96-97 ex ecu (vtec) or get a p28 ecu and a obd2a-obd1 jumper harness.
some extra wire
some extra ecu pins
knock sensor(not needed if coverted to obd1 with p28)
head gasket
intake manifold gasket
y8 intake manofold (dont have to but is a gain+)
y8 wire harness (you need the vtec plug and the oil pressure switch plug from it)
y8 dizzy 0bd2 96-00
96-97 ex ecu (vtec) or get a p28 ecu and a obd2a-obd1 jumper harness.
some extra wire
some extra ecu pins
knock sensor(not needed if coverted to obd1 with p28)
head gasket
intake manifold gasket
Last edited by 94civichatchback; 08-27-2009 at 09:01 AM.
#7
ok will do, thanks, well ive started buying the stuff to do this i bought the ecu! is there a performance dizzy out there or something that would be an upgrade or just go with a stock one?