LS swap is finally done Check it out
Thread Starter
Joined: Dec 2005
Posts: 30
From:
LS swap is finally done Check it out
Thread Starter
Joined: Dec 2005
Posts: 30
From:
RE: LS swap for you to see!
I am doing work for a friend
he got the stuff off of one of his buddies for cheap.
we did not put rods or pistons in the buck stops here i guess
but what ever right he isn't going to drive it super hard all the time and if the bottom end falls out we'll put a new one in and she'll never break right! i hope
no this is going to be a long project it is already month 2 he is so slow! lol
he got the stuff off of one of his buddies for cheap.
we did not put rods or pistons in the buck stops here i guess
but what ever right he isn't going to drive it super hard all the time and if the bottom end falls out we'll put a new one in and she'll never break right! i hope
no this is going to be a long project it is already month 2 he is so slow! lol
HCF Member
Joined: Jan 2005
Posts: 5,180
From: Chicago, Illinois
RE: LS swap for you to see!
I was jus wonderin about how you got the motor. I was looking at SunriseJDM and they say that they don't include a alternator, starter, etc and say that you have to get this off your old motor. So are you gonna take the alternator, starter, PS pump, A/C compressor, etc off the old engine and install it on the new one?
Thread Starter
Joined: Dec 2005
Posts: 30
From:
RE: LS swap for you to see!
No its all going to be new
it was dropped off and going to be a quick install
and now were building a show car i guess
the owner bouht a truck for the winter and were building the civic hatch for him
but yeah all brand new stuff less rods and pistons and crank but new bearings!!!
machined head it should go good
it was dropped off and going to be a quick install
and now were building a show car i guess
the owner bouht a truck for the winter and were building the civic hatch for him
but yeah all brand new stuff less rods and pistons and crank but new bearings!!!
machined head it should go good
Thread Starter
Joined: Dec 2005
Posts: 30
From:
RE: LS swap for you to see!
ORIGINAL: Nail I3unny
what car is it going into?
what car is it going into?
invidia ex
full suspension
2 race seats
clean car i will have pics as soon as the motor is done
its a slow project due to no parts ie lower bearing-
but i am hoping it will be done soon
i want to drive it haha
Thread Starter
Joined: Dec 2005
Posts: 30
From:
RE: LS swap for you to see!
Well the plan for the swap is a non vtec
with a 50 shot from a zex kit
possibly turbo so it will be turbo ready but most likely won't get it cause this is the worlds longest enginge swap the engine has been in pieces or months now!
but its comnig sloooooooooooooooowly but its coming
here's a llittle head job a did what do you think?
http://www.cardomain.com/ride/2192302/5
with a 50 shot from a zex kit
possibly turbo so it will be turbo ready but most likely won't get it cause this is the worlds longest enginge swap the engine has been in pieces or months now!
but its comnig sloooooooooooooooowly but its coming
here's a llittle head job a did what do you think?
http://www.cardomain.com/ride/2192302/5