I was wondering if D15b Vtec engine rod bearings cross over with the other D-series engines.

 

Let me rephrase this. I know nothing about the D15B cause it's a Vtec, so any info on it, like what engine I could get aftermarket parts for that'd work for it would be great.

 

So while I've been sitting here bashing my head into the keyboard cause this engine is giving me a fit to find parts for, I ran across these.

http://cgi.ebay.com/ebaymotors/88-95...4506.m20.l1116

And I figure since I'm going to have the engine torn apart I better change the rings on it so I ran across these too.

http://cgi.ebay.com/ebaymotors/_Car-....c0.m245.l1318

My question is, would these parts work on it, cause I'm really not sure since it's the JDM D15B vtec.

 

The piston rings will fit. The JDM D15B has the same head as a D16Z6 Vtec. I have the same engine as you. Crower makes cams and valve springs that work too

 

That's good to hear.

How bout those Bearings? I don't know much about this engine, it's my first Vtec. Besides not being a B7 I don't know much about it, but I'm doing a bunch of research.

 

Those Rod bearings will fit.
Be careful buying Crank bearings and Thrust washers, they are actually smaller on the JDM D15b.

 

Alright thanks a bunch Bc, hopefully I can get this thing back together pretty soon.