So are you missing the metal pieces that bolt down in front of the headlights (under the bumper cover then) cause when I put my projectors that had to come off for the lights to come out. And the only way to do that is the bumper off I thought. /confused...unless you are missing pieces in there it doesnt seem like that should have been possible with the bumper on.

 

well im missing the one nut on the passenger side towards middle of car i droped it and its stuck SOMEWHERE... but tight enough with the top two bolts they dont seem to move at all.......

 

Well, i got home from school and pulled her out the garage. then i proceeded to clean her thouroghly and in the end installed my 12 disk cd changer that i got yesterday for free. I then drove her on the highway and got looks from an f-150 and a geo metro, parked her and went inside to type this up, the end.

 

changed all the fluids , installed my new gauge cluster W/ TACH!!!, looks awesome and was SUPER easy ...then i ripped off the stock 1.75 exhaust ..and ran 2" all the way out (cat back) with a new turbo muffler ..sounds really good with no ****ty *** "lawnmower" CRAP that most of the hondas around here have , came home and my new(used) color matched side mirrors and outside door handles came in ..got the mirrors on , got the door panels off ..but im a little nervous about changing the handles ...you have to hook it all up INSIDE the door ..not alot of room there ...damn .

 

pulled off my 17's, raised it back up a little, and put my stock steelies back on... it's still lowered like an inch and a half or so... one finger between the tire and the fender on all four wheels.

 

Got my drivers side headlight polished back up. It was starting to haze quite badly, so some elbow grease and an hour and she is back to shiny and clear.

 

Seafoamed it, changed the plugs, took my throttle body off to see if the IACV is clogged or blocked
(no problem there) and made sure everything was working fine

 

New tails finally got in the mail to replace the euros looks killer now

 

well today i droped a Alpine Type R 12inch sub and a Qlogic box in the 94..... along with my old JBL BP600.1 600watt amplifier. LUCKELY the car was already wired for a sub so thats ONE plus.... not a very good radio for subs BUT beter than nothing.....
havent been able to BUMP it tho. to late at night.... ill tweak it tomorow and cut a false floor for it to sit level and more secure!
NOTHING SPECIAL... but its BASS.... just need to secure it to the car!
i dont have a alarm on the car yet so it needs to be bolted down realy good

 

Started taking the D16z6 motor out of my wrecked car. Everything is done other than removing the drivers side axle and unbolting the motor mounts and pulling it out. Then I have to start removing the motor from my project car -2000Ex- D16y8- that has a spun rod bearing and drop the Z6 motor in it with the manual tranny and figure out how to install the rest of the manual tranny components to convert it from a auto to a manual. I have all the manual parts on my wrecked car but need to figure out what to take off and how to hook it all up.

Did some sanding on a stock bumper I just bought that was red and need to fix a little crack on it and paint it one night this week after work if I get off in time. We just had a time change that set us back an hour so its probably going to be dark by the time I get home from work unless I luck out a few nights and get off early!

Anyone want to come swap my motors out for me while Im at work?!? Hahaha that would be so nice!