Well ive been noticing a huge power lose in my SI and that it was struggling to go over 6K rpm( it was just detonating), and the block is leaking. So i had a local shop look at it and do a compression check.

cylinder
1-150
2-140
3-120
4-135

Looks like its goin into storage till fall or untill i can get about 6K for a whole new block and built.

~i guess highly hp built civics arnt for DD use~

 

That sucks, I just crashed my 98 civic ex coupe and tore my entire bumper off in a thousand pieces, bent both my front rims and dented my door and fender. I guess it's not as costly as yours but I'm still pretty bummed out about it. I can't believe how hard it is to find used parts for these cars. It took me 2 days to find 2 of those cheapo steal rims, I called everywhere and no one carries them. I only found one junk yard in the entire phonebook that had a civic even close to mine.

 

why the hell do you need 6k to build an entire new block? Are you a retarded or just have mommy and daddy buy you everything when in fact you have no knowledge of cars?

 

hahaha yeah llike my parents really pay for anything i own. Im 24 and dont even live in the same state as them.

anyways yeah, gsr block, benson sleeved, cp pistons, port polish ect ect. with shipping costs and everything else with tune and install yeah about 6 grand( on the safe side). with other things what will be on the car

i have plenty of knowledge an cars. I dont have the garage or tools.

why dont u go **** urslef n keep thinking ur cool cause u have so many posts.

 

Enlighten me as to why you need to completely build a new motor then? Do you have a hole in the block or are the cylinder walls trashed?

 

I believe we've been down this road before.... 100% of the time, that statement is true 0% of the time

 

460hp to front drive is insane!! Any torque to go with those numbers? Just enough to f*ck with your ability to steer the car! HAve fun!!

SMOKEM

 

the rings are bad but i havent opend her up so were thinking it was a **** pour sleeve job and something is goin on there. and since it was a 84mm block i have to get everything redone

 

bad rings = new block.....?

 

^^^my thoughts too.